news
Open Hardware/Modding: Arduino, ESP32, and Raspberry Pi
-
Arduino ☛ Porting a weather station app from the Arduino® GIGA™ R1 to the Arduino® UNO™ R4 boards
GIGA R1 WiFi is built as a powerful development board, thanks to its dual-core, 32-bit STM32H747XI microcontroller, designed to operate at clock speeds of up to 480 MHz and equipped with 1 MB of RAM. Arduino Forum users KurtE and Merlin513 developed a ZephyrOS-based weather station app for it, showcasing its capabilities.
-
CNX Software ☛ Open-source ESP32-C3 DNS ad blocker supports up to over 500,000 domains without PSRAM
Developed by Zed (M-Abozaid), the esp32-c3-adblock is an open-source, Pi-hole-style DNS ad blocker that runs on a $2 ESP32-C3 microcontroller board/module without requiring PSRAM. It blocks ads and tracking domains across devices on a home or small office network by filtering DNS requests. Instead of storing domain strings in RAM, the project stores them as sorted 40-bit FNV-1a hashes in flash memory and uses binary search to check DNS requests. When a UDP DNS query comes in, the C++ firmware extracts the domain, hashes it (including parent suffixes), and performs a binary search against the flash hash table. If the domain is on the blocklist, the ESP32-C3 returns 0.0.0.0 to block the request.
-
Jeff Geerling ☛ Radxa's Q8B has 2x the performance and expansion of the Pi 5
There was a time I'd look at a board like the Radxa Dragon Q8B (at left, above) and be like, "there's no way I'd spend $209 on an SBC with 8 gigs of RAM". But we're in 2026, and seeing the 8 gig Raspberry Pi 5 going for almost the same amount, I figured I'd give it a shot.
-
Audiocasts/Shows