Devices, Hacking Hardware, and Robotics With GNU/Linux



-
Sipeed Lichee RV RISC-V module gets $5+ carrier board with HDMI and USB ports, optional WiFi - CNX Software
Sipeed introduced the Lichee RV Allwinner D1 Linux RISC-V board going for just $17 with 512MB RAM last month. While with a USB-C port it could be used as a standalone part, its dual M.2 connector makes it more like a module and we noted a tiny carrier board was in the works at the time.
The baseboard is now available and known as the Lichee RV Dock adding HDMI and USB ports, as well as a 40-pin GPIO header for just $5, or $8 if you’d like to get Wi-Fi 4 and Bluetooth 4.2 connectivity through a Realtek RTL8723DS module.
-
CH583 RISC-V microcontroller supports Bluetooth 5.3 LE - CNX Software
Following up on the CH572 RISC-V BLE microcontroller with 10KB SRAM, WCH has now introduced the CH583 RISC-V microcontroller with 32KB SRAM, 1 MB flash, and support for the latest Bluetooth 5.3 LE standard.
The new microcontroller also offers a wide range of peripherals with two USB host/device interfaces, up to 40 GPIOs, four UART, two SPI, one I2C, up to 14 ADC interfaces, and more. WCH also offers CH581 and CH582 microcontrollers with a different minimum input voltage, less storage (256KB for CH581) and/or peripherals.
-
Indoor positioning BU01 development board can detect tiny body movements - CNX Software
GPS is available for outdoor positioning, what about indoors? There is a positioning technology that is more accurate than GPS: UWB. The technology offers positioning accuracy within 10cm which greatly compensates for the shortcomings of the indoor RSSI positioning of past IoT products.
-
ESP32 Pretends To Be GPU; Gives You A Ransomware Scare | Hackaday
Sometimes a piece of hardware meets a prank idea, and that’s how the fun Hackaday articles are born. [AnotherMaker] shows us some harmless entertainment at the expense of an IT enthusiast in your life – programming an ESP32-powered devboard with a VGA output to show an ever-feared “all your files are encrypted” screen on a monitor connected to it. The ASCII text in its 8-bit glory helps sell this prank, making it look exactly like a BIOS-hijacking piece of malware it claims to be; akin to UIs of the past that skilled hackers would whip up in x86 assembly. The devboard’s integration into a PCI card backplate is a cherry on top, a way to seamlessly integrate this into a PC case, making it look not particularly different from an old graphics card. In such a configuration, we don’t doubt that this would be a head-scratcher to a certain kind of an IT department worker.
-
Some predictions for the year ahead [Ed: Takes note of the role of GNU/Linux in robotics]
Robotics processor vendors will increasingly offer Robot Operating System (ROS)-based solutions for hardware acceleration across the entirety of robotics offerings.
This should help tackle the problem of system integration and entice developers to adopt more off-the-shelf processors and hardware.
Furthermore, the hardware-software optimization will provide a set of benchmarks and standards for the field, which is fairly fragmented at the moment, accelerating the time-to-market.
As a total of 45,000 cobots and 452,000 mobile robots are expected to be shipped in 2022, a 65 percent and 51 percent Y-o-Y growth, end users are expected to benefit from the tighter integration.
What will not happen in 2022 includes:
The democratization of robotics expertise
While the emergence of ROS and various robotics startups will offer real advances in the short term, robotics as a whole suffers from a significant shortage in expertise.
In the long run, this will have an adverse effect on development and commercialization. Considerable investment in resource- and time-intensive areas requiring experts from different fields is badly needed, but this will not happen anytime soon.
-

- Login or register to post comments
Printer-friendly version- 2153 reads
PDF version
More in Tux Machines
- Highlights
- Front Page
- Latest Headlines
- Archive
- Recent comments
- All-Time Popular Stories
- Hot Topics
- New Members
digiKam 7.7.0 is released
After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release.
|
Dilution and Misuse of the "Linux" Brand
|
Samsung, Red Hat to Work on Linux Drivers for Future Tech
The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world.
Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility.
|
today's howtos
|








.svg_.png)
Content (where original) is available under CC-BY-SA, copyrighted by original author/s.

Recent comments
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago