Language Selection

English French German Italian Portuguese Spanish

Linux/Hackable Devices: OnLogic, Wind River and More

Filed under
GNU
Linux
Hardware
  • Comet Lake-S computers support Ubuntu

    OnLogic’s fanless, $768-and-up “Helix 500” and larger, PCIe x16 enabled, $859-and-up “Helix 600” run Ubuntu or Windows on Intel’s 10th Gen Comet Lake-S with triple display support, 2x M.2, 2x GbE, and 6x USB 3.1 Gen 2 ports.

    OnLogic has launched two Helix Series embedded computers that support Ubuntu. The fanless, Linux-ready Helix 500 (HX500) and Helix 600 (HX600) share the same choice of 10th Gen Comet Lake-S processors and a base feature set. The Helix 600 adds a PCIe x16 slot and 2x expansion I/O slots for custom modules.

  • Wind River Recognized as #1 in Edge Compute OS Platforms

    Wind River®, a leader in delivering software for the intelligent edge, upholds its long-standing ranking as the technology leader in the real-time operating system (RTOS) and commercial Linux categories with its flagship VxWorks® and Wind River Linux, according to VDC Research. The company has also surpassed Microsoft as the overall commercial leader in the edge compute OS market.

  • KitDuino Proto – An Arduino Compatible Board with a Built-in Prototyping Area

    At the initial stage of development, many people would connect their Arduino board to a circuit build on a breadboard, and once this is done, some may either want to design their own board or for simpler circuits, simply move from the breadboard to a perfboard with components soldered to it.

    With Microchip ATMega32U4 based KitDuino Proto you could do that directly on the Arduino board itself since it comes with a small prototyping area.

  • QNAP QSW-1105-5T 2.5 Gbps Ethernet Switch Targets Home Users

    But if you intended to upgrade your home network to 2.5 Gbps Ethernet (aka 2.5GbE) possibly with an ODROID-H2+ single board computer in the mix, you may have found 2.5GbE switches are pretty expensive going for several hundred dollars.

  • WCH CH569 RISC-V SoC Offers USB 3.0, Gigabit Ethernet, High-Speed SERDES & HSPI Interfaces

    CH569 appears to be the first RISC-V processor part of WCH CH56x family of RISC (note: not V here) processor for networked storage applications with CH565, CH566, CH567, and CH568 offering a mix of Ethernet, SATA, USB 2.0, and other interfaces All chips come with the same 120 MHz RISC processor, and only 32KB RAM (128-bit wide), but the company claims the 128-bit DMA engine can transfer large amount of data.

    [...]

    At this point, there’s very little information available, and everything is in Chinese on the product page, but at least you can request more information and samples.

More Arduino projects

  • This Arduino-powered machine folds your shirts at the push of a button

    Inspired by an old FlipFold TV ad, YouTuber Ty Palowski decided to make his own automated shirt folding machine.

    Palowski’s device is made in four folding sections, which lie flat to accept the unfolded piece of laundry. When the shirt is properly placed, a capacitive touch sensor starts the process, which is controlled via an Arduino and motor drivers.

  • Mechanical 7-segment display made using electromagnets

    When you think of a “7-segment” display, your mind naturally goes to something involving LCD or LED technology. As seen here, however, this 0-9 pattern can also be duplicated mechanically using a series of electromagnets.

    Neeraj Rane’s 3D-printed device is controlled by an Arduino Nano, along with a shift register. These activate seven hand-wound coils that push the magnet-embedded segments in and out, via a series of IRF540N MOSFETs.

    As of now, the display simply cycles through numbers. If a few more digits were added, and perhaps a user interface and/or an RTC module, it could form the basis of an even more interesting project.

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

More in Tux Machines

digiKam 7.7.0 is released

After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release. Read more

Dilution and Misuse of the "Linux" Brand

Samsung, Red Hat to Work on Linux Drivers for Future Tech

The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world. Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility. Read more

today's howtos

  • How to install go1.19beta on Ubuntu 22.04 – NextGenTips

    In this tutorial, we are going to explore how to install go on Ubuntu 22.04 Golang is an open-source programming language that is easy to learn and use. It is built-in concurrency and has a robust standard library. It is reliable, builds fast, and efficient software that scales fast. Its concurrency mechanisms make it easy to write programs that get the most out of multicore and networked machines, while its novel-type systems enable flexible and modular program constructions. Go compiles quickly to machine code and has the convenience of garbage collection and the power of run-time reflection. In this guide, we are going to learn how to install golang 1.19beta on Ubuntu 22.04. Go 1.19beta1 is not yet released. There is so much work in progress with all the documentation.

  • molecule test: failed to connect to bus in systemd container - openQA bites

    Ansible Molecule is a project to help you test your ansible roles. I’m using molecule for automatically testing the ansible roles of geekoops.

  • How To Install MongoDB on AlmaLinux 9 - idroot

    In this tutorial, we will show you how to install MongoDB on AlmaLinux 9. For those of you who didn’t know, MongoDB is a high-performance, highly scalable document-oriented NoSQL database. Unlike in SQL databases where data is stored in rows and columns inside tables, in MongoDB, data is structured in JSON-like format inside records which are referred to as documents. The open-source attribute of MongoDB as a database software makes it an ideal candidate for almost any database-related project. This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple and assumes you are running in the root account, if not you may need to add ‘sudo‘ to the commands to get root privileges. I will show you the step-by-step installation of the MongoDB NoSQL database on AlmaLinux 9. You can follow the same instructions for CentOS and Rocky Linux.

  • An introduction (and how-to) to Plugin Loader for the Steam Deck. - Invidious
  • Self-host a Ghost Blog With Traefik

    Ghost is a very popular open-source content management system. Started as an alternative to WordPress and it went on to become an alternative to Substack by focusing on membership and newsletter. The creators of Ghost offer managed Pro hosting but it may not fit everyone's budget. Alternatively, you can self-host it on your own cloud servers. On Linux handbook, we already have a guide on deploying Ghost with Docker in a reverse proxy setup. Instead of Ngnix reverse proxy, you can also use another software called Traefik with Docker. It is a popular open-source cloud-native application proxy, API Gateway, Edge-router, and more. I use Traefik to secure my websites using an SSL certificate obtained from Let's Encrypt. Once deployed, Traefik can automatically manage your certificates and their renewals. In this tutorial, I'll share the necessary steps for deploying a Ghost blog with Docker and Traefik.