Language Selection

English French German Italian Portuguese Spanish

Linux 5.8 Will Finally Be Able To Control ThinkPad Laptops With Dual Fans

Filed under
Linux

Long overdue but for Lenovo ThinkPad laptops sporting two fans, the Linux 5.8 kernel will see the ability to control both fans.

On the likes of the Lenovo ThinkPad P50, P51, P52, P70, P71, P72, P1 Gen1, P2 Gen2, X1 Extreme Gen1, and X1 Extreme Gen2 there are two fans that the Linux kernel's ThinkPad_ACPI driver will now be able to control.

Read more

Linux Device Mapper Adding An "Emulated Block Size" Target

  • Linux Device Mapper Adding An "Emulated Block Size" Target

    Device Mapper, a key piece to Linux Soft RAID, dm-crypt, and other storage capabilities, is with Linux 5.8 seeing the new EBS target. EBS allows for emulating a smaller block size than the native capabilities of the underlying storage device. The original use-case for DM EBS is for emulating 512 byte sectors on 4K native disks.

    The Device Mapper Emulated Block Size target supports logical block sizes from 512 to 4096 bytes. This new target was contributed by Red Hat. Basically it's similar to the 512e local block size emulation offered by some disk drives currently while this emulation is implemented within the Linux block layer for dealing with software that isn't optimized for 4K sectors.

Intel 11th Gen Rocket Lake CPUs Support Added To Linux Graphics

  • Intel 11th Gen Rocket Lake CPUs Support Added To Linux Graphics Driver, Compatible With 400 & 500 Series Chipsets

    In the report, the source states that the first patches have been added to the Linux graphics driver that adds support for the Gen 12 Xe graphics featured on Intel's Rocket Lake CPUs. A total of 23 patches were included in the i915 Linux Kernel driver with over 700 lines of code. As of now, there are a total of 6 six PCI IDs for Xe graphics featured on Rocket Lake CPUs.

    [...]

    This is essentially referring to the mobile parts but we also confirmed in our exclusive report that Intel's Rocket Lake-S Desktop CPUs will be compatible with the newly introduced 400-series for the desktop platform including the Z490 motherboards. This has further been confirmed by board makers such as Gigabyte who revealed that next-gen Rocket Lake CPUs will be compatible with their Z490 lineup.

Freescale Ethernet Driver Unlocks A Big Performance Improvement

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

More in Tux Machines

digiKam 7.7.0 is released

After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release. Read more

Dilution and Misuse of the "Linux" Brand

Samsung, Red Hat to Work on Linux Drivers for Future Tech

The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world. Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility. Read more

today's howtos

  • How to install go1.19beta on Ubuntu 22.04 – NextGenTips

    In this tutorial, we are going to explore how to install go on Ubuntu 22.04 Golang is an open-source programming language that is easy to learn and use. It is built-in concurrency and has a robust standard library. It is reliable, builds fast, and efficient software that scales fast. Its concurrency mechanisms make it easy to write programs that get the most out of multicore and networked machines, while its novel-type systems enable flexible and modular program constructions. Go compiles quickly to machine code and has the convenience of garbage collection and the power of run-time reflection. In this guide, we are going to learn how to install golang 1.19beta on Ubuntu 22.04. Go 1.19beta1 is not yet released. There is so much work in progress with all the documentation.

  • molecule test: failed to connect to bus in systemd container - openQA bites

    Ansible Molecule is a project to help you test your ansible roles. I’m using molecule for automatically testing the ansible roles of geekoops.

  • How To Install MongoDB on AlmaLinux 9 - idroot

    In this tutorial, we will show you how to install MongoDB on AlmaLinux 9. For those of you who didn’t know, MongoDB is a high-performance, highly scalable document-oriented NoSQL database. Unlike in SQL databases where data is stored in rows and columns inside tables, in MongoDB, data is structured in JSON-like format inside records which are referred to as documents. The open-source attribute of MongoDB as a database software makes it an ideal candidate for almost any database-related project. This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple and assumes you are running in the root account, if not you may need to add ‘sudo‘ to the commands to get root privileges. I will show you the step-by-step installation of the MongoDB NoSQL database on AlmaLinux 9. You can follow the same instructions for CentOS and Rocky Linux.

  • An introduction (and how-to) to Plugin Loader for the Steam Deck. - Invidious
  • Self-host a Ghost Blog With Traefik

    Ghost is a very popular open-source content management system. Started as an alternative to WordPress and it went on to become an alternative to Substack by focusing on membership and newsletter. The creators of Ghost offer managed Pro hosting but it may not fit everyone's budget. Alternatively, you can self-host it on your own cloud servers. On Linux handbook, we already have a guide on deploying Ghost with Docker in a reverse proxy setup. Instead of Ngnix reverse proxy, you can also use another software called Traefik with Docker. It is a popular open-source cloud-native application proxy, API Gateway, Edge-router, and more. I use Traefik to secure my websites using an SSL certificate obtained from Let's Encrypt. Once deployed, Traefik can automatically manage your certificates and their renewals. In this tutorial, I'll share the necessary steps for deploying a Ghost blog with Docker and Traefik.