Language Selection

English French German Italian Portuguese Spanish

Linux 5.8 To Add Auto-Detection For Using SoundWire On Newer Intel Platforms

Filed under
Linux

While the Linux 5.7 feature merge window just closed yesterday, there is already one feature queued up for Linux 5.8 that caught our eye.

Queued today in the sound subsystem's "-next" branch is auto-detection support for SoundWire. As self-described on the MIPI project page, "MIPI SoundWire, introduced in 2014, consolidates many of the key attributes in mobile and PC audio interfaces, providing a common, comprehensive interface and scalable architecture that can be used to enable audio features and functions in multiple types of devices and across market segments. It supports the use of advanced amplifiers and microphones. In addition, it can also optimize speaker protection, microphone power and performance, noise cancellation and always-listening audio input."

Going back to late 2016, Intel has been working on the SoundWire support for Linux. SoundWire was then merged to Linux 4.16 in early 2018 and has continued to see various SoundWire improvements since that time -- most recently with the SoF SoundWire support getting squared away in Linux 5.7.

Read more

AMD Radeon Graphics Driver Amassing Improvements For Linux 5.8

  • AMD Radeon Graphics Driver Amassing Improvements For Linux 5.8

    While the Linux 5.7 merge window just ended on Sunday, with the DRM-Next cutoff for new material coming weeks prior to that, AMD developers working on their AMDGPU DRM kernel driver already have over 200 patches accumulated for the next cycle.

    AMDGPU+AMDKFD kernel driver work continues at full-speed with continued work especially on Navi and Arcturus. More work is expected over the weeks ahead but some of the material queued so far into their amd-staging-drm-next branch includes...

Linux 5.8 To Properly Support The RME Babyface Pro

  • Linux 5.8 To Properly Support The RME Babyface Pro High-End Audio Hardware

    While a peculiar name for some expensive audio hardware, the Linux 5.8 kernel is set to properly support the RME Babyface Pro and RME Babyface Pro FS.

    The RME Babyface Pro is a 24-channel USB 2.0 audio interface. The RME Babyface Pro FS meanwhile is its successor as a 24-channel 192 kHz bus-powered USB audio interface. The high-end RME Babyface Pro FS retails for around $899 USD.

Many AMD Radeon Graphics Driver Improvements Sent In For Linux

  • Many AMD Radeon Graphics Driver Improvements Sent In For Linux 5.8

    As I noted earlier this month, AMD has been amassing many graphics driver improvements for Linux 5.8. On Friday marked their first pull request to DRM-Next of the Radeon graphics driver improvements for this next kernel cycle.

    Some of the highlights for the AMDGPU kernel driver improvements sent in as part of yesterday's first pull to DRM-Next for Linux 5.8 includes:

Intel Tiger Lake Thunderbolt/USB4 Support Is Coming With Linux

  • Intel Tiger Lake Thunderbolt/USB4 Support Is Coming With Linux 5.8

    Adding to the growing list of changes building up for Linux 5.8 this summer is now having Tiger Lake Thunderbolt/USB4 support.

    Queued now as part of the Thunderbolt-Next changes for Linux 5.8 is the Tiger Lake support. The commit notes that Tiger Lake's Thunderbolt/USB4 controller is "quite close" to that of current Ice Lake hardware.

Linux 5.8 Seeing The Preliminary Changes Ahead Of RISC-V EFI...

  • Linux 5.8 Seeing The Preliminary Changes Ahead Of RISC-V EFI Support

    One of the areas being worked on upstream recently for the RISC-V architecture's Linux kernel support is EFI handling. The preliminary work for supporting EFI on RISC-V is set to land for the Linux 5.8 kernel.

    In recent months the Linux EFI code has been going through a spring cleaning of sorts with the preparations towards RISC-V enablement. The initial preparations for RISC-V EFI support have been sent in as part of EFI-next code ultimately destined for Linux 5.8.

AMD SPI SoC Linux Driver Appears Ready For Mainline In Linux 5.8

  • AMD SPI SoC Linux Driver Appears Ready For Mainline In Linux 5.8

    The new spi-amd driver looks like it could make its debut in Linux 5.8.

    Published earlier this month was an SPI controller driver for AMD SoCs. This 333 lines of code driver enables Serial Peripheral Interface (SPI) support for AMD SoCs with the "AMDI0061" device.

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

More in Tux Machines

digiKam 7.7.0 is released

After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release. Read more

Dilution and Misuse of the "Linux" Brand

Samsung, Red Hat to Work on Linux Drivers for Future Tech

The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world. Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility. Read more

today's howtos

  • How to install go1.19beta on Ubuntu 22.04 – NextGenTips

    In this tutorial, we are going to explore how to install go on Ubuntu 22.04 Golang is an open-source programming language that is easy to learn and use. It is built-in concurrency and has a robust standard library. It is reliable, builds fast, and efficient software that scales fast. Its concurrency mechanisms make it easy to write programs that get the most out of multicore and networked machines, while its novel-type systems enable flexible and modular program constructions. Go compiles quickly to machine code and has the convenience of garbage collection and the power of run-time reflection. In this guide, we are going to learn how to install golang 1.19beta on Ubuntu 22.04. Go 1.19beta1 is not yet released. There is so much work in progress with all the documentation.

  • molecule test: failed to connect to bus in systemd container - openQA bites

    Ansible Molecule is a project to help you test your ansible roles. I’m using molecule for automatically testing the ansible roles of geekoops.

  • How To Install MongoDB on AlmaLinux 9 - idroot

    In this tutorial, we will show you how to install MongoDB on AlmaLinux 9. For those of you who didn’t know, MongoDB is a high-performance, highly scalable document-oriented NoSQL database. Unlike in SQL databases where data is stored in rows and columns inside tables, in MongoDB, data is structured in JSON-like format inside records which are referred to as documents. The open-source attribute of MongoDB as a database software makes it an ideal candidate for almost any database-related project. This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple and assumes you are running in the root account, if not you may need to add ‘sudo‘ to the commands to get root privileges. I will show you the step-by-step installation of the MongoDB NoSQL database on AlmaLinux 9. You can follow the same instructions for CentOS and Rocky Linux.

  • An introduction (and how-to) to Plugin Loader for the Steam Deck. - Invidious
  • Self-host a Ghost Blog With Traefik

    Ghost is a very popular open-source content management system. Started as an alternative to WordPress and it went on to become an alternative to Substack by focusing on membership and newsletter. The creators of Ghost offer managed Pro hosting but it may not fit everyone's budget. Alternatively, you can self-host it on your own cloud servers. On Linux handbook, we already have a guide on deploying Ghost with Docker in a reverse proxy setup. Instead of Ngnix reverse proxy, you can also use another software called Traefik with Docker. It is a popular open-source cloud-native application proxy, API Gateway, Edge-router, and more. I use Traefik to secure my websites using an SSL certificate obtained from Let's Encrypt. Once deployed, Traefik can automatically manage your certificates and their renewals. In this tutorial, I'll share the necessary steps for deploying a Ghost blog with Docker and Traefik.