Language Selection

English French German Italian Portuguese Spanish

Btrfs and Proactive Memory Compaction in Linux 5.5

Filed under
Linux
  • Btrfs Gets A Big Improvement For More Robust RAID1 In Linux 5.5

    David Sterba sent in his pull request early of the Btrfs file-system changes that are ready for merging into the Linux 5.5 merge window next week.

    The biggest improvement is the Btrfs native RAID support now supporting three and four copy options for RAID1. Btrfs' RAID1 code up to now has always relied upon two copies of data while now there is support for three and four copies if desired for better data integrity. This new "RAID1C3" mode is intended as a replacement of RAID6 profile on meta-data and more resiliency against the possible failure of two drives in an array.

  • NVIDIA's Proactive Memory Compaction Work Revised For The Linux Kernel

    A few weeks back I wrote about NVIDIA's Nitin Gupta working on proactive memory compaction for the Linux kernel to more proactively compact memory rather than doing so on-demand when it can lead to high latencies for applications needing lots of huge-pages.

    That proactive compaction work at the time was flying under a "request for comments" flag but with continued work by Nitin and developer comments, he has now published a revised patch series that is no longer RFC.

64-Bit ARM Updates Sent In Ahead Of The Linux 5.5 Cycle

  • 64-Bit ARM Updates Sent In Ahead Of The Linux 5.5 Cycle

    Catalin Marinas who oversees the 64-bit ARM (ARM64 / AArch64) architecture code within the mainline kernel has already submitted his pull request early for the Linux 5.5 kernel cycle beginning tonight or early on Monday.

KUnit Slated To Land With The Linux 5.5 Kernel

  • KUnit Slated To Land With The Linux 5.5 Kernel For Expanding Kernel Unit Testing

    As part of the KSelfTest updates sent in early for the Linux 5.5 merge window opening tonight/tomorrow, Google's KUnit is included in this pull request as the basic kernel unit testing framework.

    Shuah Khan summed up KUnit in the pull request as "a lightweight unit testing and mocking framework for the Linux kernel from Brendan Higgins. KUnit is not an end-to-end testing framework. It is currently supported on UML and sub-systems can write unit tests and run them in UML env. KUnit documentation is included in this update."

    With this debut of KUnit there is a test for the proc sysctl, for the 'list' doubly linked list, and for decoding extended timestamps in EXT4. KUnit is still a work-in-progress and expect more tests to land in coming cycles.

Habana Labs

  • Habana Labs Begins Preparing For Future ASIC Support In Their Linux Driver

    With the Linux 5.5 kernel now in development the Habana Labs AI startup is preparing for supporting future chips with their open-source Linux kernel driver.

    Habana is the company that has been building special-purpose chips for AI training and inference. Their "Goya" AI inference chip is supported by their initial Linux driver code and offers compelling performance over CPUs/GPUs for inference. Habana Labs mainlined their AI accelerator driver for the Goya chip earlier this year in Linux 5.1.

Linux 5.5 To Perform Late CPU Microcode Updates In Parallel

  • Linux 5.5 To Perform Late CPU Microcode Updates In Parallel

    Months ago we reported on vendors and cloud providers being interested in restoring parallel CPU microcode updates on Linux for helping large core count servers. With Linux 5.5 that change is coming.

    Oracle and other cloud providers have been wanting late CPU microcode updates to be applied in parallel in order to reduce the downtime of systems on servers with many cores. The parallel microcode updating had been dropped in Linux following the Spectre vulnerabilities with a shift to sequential CPU microcode updating. With this revised implementation, updating microcode on multiple CPU cores is done concurrently so as long as only the first thread of each CPU core is updated while any sibling thread waits for the update to complete.

Kernel Concurrency Sanitizer Set For Linux 5.5 To Uncover...

  • Kernel Concurrency Sanitizer Set For Linux 5.5 To Uncover Data Race Conditions

    Adding to the list of changes on deck for the Linux 5.5 kernel is a new "sanitizer" for spotting data race conditions.

    The Linux kernel already has an address sanitizer, undefined behavior sanitizer, and other helpers while the newest is the kernel concurrency sanitizer. Like many of the sanitizers for the kernel and within compilers, the work comes courtesy of Google engineers.

Linux 5.5 Begins Sanity Checking RdRand Output

  • Linux 5.5 Begins Sanity Checking RdRand Output Due To Buggy Processor Behavior

    The in-development Linux 5.5 kernel will begin sanity checking the RdRand instruction output for randomness on CPU boot/resume due to the recent spat of AMD CPUs that have yielded non-random RdRand output.

    Due to some AMD Jaguar and Bulldozer CPUs having buggy RdRand when paired with various motherboards due to firmware/BIOS differences particularly on resume, the Linux kernel resorted to no longer advertising RdRand for Family 15h/16h processors a few months back.

    But as a more generic long-term solution to fend off RdRand problems moving forward, the Linux kernel is beginning to sanity check RdRand output.

Linux 5.5 Crypto Code Has The Changes To Usher In WireGuard

  • Linux 5.5 Crypto Code Has The Changes To Usher In WireGuard

    The main addition to the crypto area for this next kernel cycle is carrying the patches that adopt some elements of the Zinc crypto effort led by WireGuard's Jason Donenfeld. The lack of Zinc support in the mainline Linux kernel has been the main blocker from merging this secure VPN tunnel into the kernel, but now the crypto folks have decided to integrate some of the best pieces of its design and with time some other Zinc bits could still get merged too. But what's landing for Linux 5.5 is enough to unblock the crypto dependency in WireGuard. With that said, WireGuard should land in Linux 5.6 if the final reviews go well but sadly not in time for this new 5.5 cycle.

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

More in Tux Machines

digiKam 7.7.0 is released

After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release. Read more

Dilution and Misuse of the "Linux" Brand

Samsung, Red Hat to Work on Linux Drivers for Future Tech

The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world. Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility. Read more

today's howtos

  • How to install go1.19beta on Ubuntu 22.04 – NextGenTips

    In this tutorial, we are going to explore how to install go on Ubuntu 22.04 Golang is an open-source programming language that is easy to learn and use. It is built-in concurrency and has a robust standard library. It is reliable, builds fast, and efficient software that scales fast. Its concurrency mechanisms make it easy to write programs that get the most out of multicore and networked machines, while its novel-type systems enable flexible and modular program constructions. Go compiles quickly to machine code and has the convenience of garbage collection and the power of run-time reflection. In this guide, we are going to learn how to install golang 1.19beta on Ubuntu 22.04. Go 1.19beta1 is not yet released. There is so much work in progress with all the documentation.

  • molecule test: failed to connect to bus in systemd container - openQA bites

    Ansible Molecule is a project to help you test your ansible roles. I’m using molecule for automatically testing the ansible roles of geekoops.

  • How To Install MongoDB on AlmaLinux 9 - idroot

    In this tutorial, we will show you how to install MongoDB on AlmaLinux 9. For those of you who didn’t know, MongoDB is a high-performance, highly scalable document-oriented NoSQL database. Unlike in SQL databases where data is stored in rows and columns inside tables, in MongoDB, data is structured in JSON-like format inside records which are referred to as documents. The open-source attribute of MongoDB as a database software makes it an ideal candidate for almost any database-related project. This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple and assumes you are running in the root account, if not you may need to add ‘sudo‘ to the commands to get root privileges. I will show you the step-by-step installation of the MongoDB NoSQL database on AlmaLinux 9. You can follow the same instructions for CentOS and Rocky Linux.

  • An introduction (and how-to) to Plugin Loader for the Steam Deck. - Invidious
  • Self-host a Ghost Blog With Traefik

    Ghost is a very popular open-source content management system. Started as an alternative to WordPress and it went on to become an alternative to Substack by focusing on membership and newsletter. The creators of Ghost offer managed Pro hosting but it may not fit everyone's budget. Alternatively, you can self-host it on your own cloud servers. On Linux handbook, we already have a guide on deploying Ghost with Docker in a reverse proxy setup. Instead of Ngnix reverse proxy, you can also use another software called Traefik with Docker. It is a popular open-source cloud-native application proxy, API Gateway, Edge-router, and more. I use Traefik to secure my websites using an SSL certificate obtained from Let's Encrypt. Once deployed, Traefik can automatically manage your certificates and their renewals. In this tutorial, I'll share the necessary steps for deploying a Ghost blog with Docker and Traefik.