Language Selection

English French German Italian Portuguese Spanish

System76 Launches Two Linux Laptops Powered by Coreboot Open-Source Firmware

Filed under
Linux
OSS

Driven by the idea that technology should always be free and open, System76 is launching today the Galago Pro and Darter Pro laptops with their new Coreboot-based open-source firmware, which not only makes these computers boot faster than with a proprietary firmware, but it also protects them against various security vulnerabilities and other threats.

"Our lightweight open source firmware gets users from boot screen to desktop 29% faster," said System76. "Removing unnecessary features from the firmware such as network connectivity and execution environments also decreases the potential for vulnerability, meaning users who upgrade to the new laptops will benefit from increased security."

Read more

Also: System76 Will Begin Shipping 2 Linux Laptops With Coreboot-Based Open Source Firmware

System76 launches two Linux with Comet Lake chips and Coreboot

System76 Launches Two Intel Laptops With "Open-Source Firmware" Coreboot

In Slashdot

Modern Linux Laptops with Coreboot Firmware From System76

  • Modern Linux Laptops with Coreboot Firmware From System76

    Are you looking for modern Linux laptops with coreboot? The wait is over. Coreboot is a free and open-source software. The coreboot project aimed at replacing the proprietary BIOS firmware and blobs. System76 recently announced two Intel laptops with Coreboot, which as an alternative to proprietary BIOS. These laptops are using Intel 10th Gen CPUs.

    [...]

    Coreboot itself is opensource; however, Intel CPU depends upon the binary blobs for modern Linux laptops. The good news is Intel ME is removed or disabled permanently on newer Linux models from System76. I think it is a step in the right direction despite few binary blobs (e.g. FSP), and I hope someday will get pure open-source firmware for modern Linux laptop.

More of System 76

  • System76 Galago Pro and Darter Pro Linux laptops get open source firmware

    Well, folks... they did it. The people over at System76 finally achieved one of their dreams -- selling laptops with open source firmware! This is quite an impressive feat.

    System76 has long been a proponent of both Linux and open source, and over the years, it never deviated from that. And now, two of its laptops will come with open source firmware based on Coreboot. Thrilling stuff, eh? Also exciting, however, is both computers can be be configured with some excellent specifications too, such as 10th gen Intel Core processors, up to 32GB RAM, and Thunderbolt 3.

  • System76 Introduces two Intel Comet Lake Linux Laptops with Coreboot Firmware

    Intel officially launched Comet Lake processors last August with Y-series (4.5-5.5W TDP) and U-Series (15W TDP) targeting 2-in-1 hybrid laptops and tablets. Since several Windows 10 Comet Lake laptops launched such as OneMix 3Pro 8.4″ mini laptop with an Intel Core i5-10210Y Comet Lake-Y processor.

    If you’d rather get a Comet Lake laptop running Linux, System76 got you covered with two models, namely Galago Pro and Darter Pro laptops running a choice of Pop!_OS 19.10 (64-bit), Pop!_OS 18.04 LTS (64-bit), or Ubuntu 18.04 LTS (64-bit) operating systems, as well as System76 open firmware based on Coreboot, EDK2, and System76 firmware apps.

More System76

  • System76 have put Coreboot into two of their main Intel-powered laptops

    Want your next laptop to be a bit more open? System76 have announced their Galago Pro and Darter Pro now come with Coreboot, the open source boot firmware.

    From what they said, this should enable their systems to boot "29%" faster. Both systems are available for pre-order now, with shipping expected to begin in the last week of October. Both sound like pretty great units for work and a little Linux gaming on the go. The Galago Pro starts at $949 while the more powerful Darter Pro starts at $999.

ZDNet's coverage

  • Linux laptops: System76 reveals Intel 10th generation CPUs for its two new models

    The Galago Pro can be configured with up to 32GB of memory and up to 6TB of SSD storage. There are plenty of ports, including USB 3.1 Type-C with Thunderbolt 3, two USB 3.1 Type-A ports, and an SD Card Reader.

    The Linux operating systems of course come free, but to get 6TB of storage buyers need to purchase a 2TB NVMe SSD and they can add an extra 4TB 2.5-inch drive, which bumps the price up to $1,877.

    The Darter Pro can also be configured with up to 32GB memory and M.2 SATA or PCIe NVMe SSD storage of up to 2TB.

    Similarly, it has USB 3.1 Type-C with Thunderbolt 3, two USB 3.0 Type-A ports, one USB 2.0 port, and a SD Card Reader.

    To get the largest memory and storage on the Darter Pro, consumers would be looking at a total price of $2,126. If buyers want a UK keyboard instead of the US keyboard, they'll need to pay an extra $119.

System76 releases two new Comet-Lake-powered laptops

  • System76 releases two new Comet-Lake-powered laptops with Linux Coreboot firmware

    OEMs have already announced a bunch of Intel 10th gen CPU upgrades for the most popular Windows-based laptop series, but what about Linux-based ones? System76 has us covered with two 14 and 15-inch models sporting mid-range to premium Comet Lake configurations, and, as an added bonus, these systems feature the highly tunable Coreboot open source firmware.

    The 14-inch model is part of the Galago Pro family, while the 15-incher joins the Darter Pro series. Both models can be configured with mid-range specs comprising an Intel Core I5-10210U CPU coupled with 8 GB of RAM and a 240 GB M.2 SSD, along with a 1080p matte display. If budget is not a problem, users can further max out the specs to include a quad-core i7-10510U, up to 32 GB of RAM and up to 6 TB of SSD+HDD storage. Standard features for both models also include a GbE NIC with jack, dual-band Wi-Fi + Bluetooth 5.0, a Thunderbolt 3 port, USB-A 3.0 ports, MiniDisplayPort and HDMI outs, and an SD card reader.

System76 will ship Coreboot-powered firmware...

  • System76 will ship Coreboot-powered firmware, a new OS for the apocalypse, and more open source news

    The Denver-based Linux PC manufacturer announced plans to start shipping two laptop models with its Coreboot-powered open source firmware later this month. Jason Evangelho, Senior Contributor at Forbes, cited this move as a march towards offering open source software and hardware from the ground up.

    System76, which also develops Pop OS, is now taking pre-orders for its Galago Pro and Darter Pro laptops. It claims that Coreboot will let users boot from power off to the desktop 29% faster.

    Coreboot is a lightweight firmware designed to simplify the boot cycle of systems using it. It requires the minimum number of tasks needed to load and run a modern 32-bit or 64-bit operating system. Coreboot can offer a replacement for proprietary firmware, though it omits features like execution environments. Our own Don Watkins asked if Coreboot will ship on other System76 machines.

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

More in Tux Machines

digiKam 7.7.0 is released

After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release. Read more

Dilution and Misuse of the "Linux" Brand

Samsung, Red Hat to Work on Linux Drivers for Future Tech

The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world. Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility. Read more

today's howtos

  • How to install go1.19beta on Ubuntu 22.04 – NextGenTips

    In this tutorial, we are going to explore how to install go on Ubuntu 22.04 Golang is an open-source programming language that is easy to learn and use. It is built-in concurrency and has a robust standard library. It is reliable, builds fast, and efficient software that scales fast. Its concurrency mechanisms make it easy to write programs that get the most out of multicore and networked machines, while its novel-type systems enable flexible and modular program constructions. Go compiles quickly to machine code and has the convenience of garbage collection and the power of run-time reflection. In this guide, we are going to learn how to install golang 1.19beta on Ubuntu 22.04. Go 1.19beta1 is not yet released. There is so much work in progress with all the documentation.

  • molecule test: failed to connect to bus in systemd container - openQA bites

    Ansible Molecule is a project to help you test your ansible roles. I’m using molecule for automatically testing the ansible roles of geekoops.

  • How To Install MongoDB on AlmaLinux 9 - idroot

    In this tutorial, we will show you how to install MongoDB on AlmaLinux 9. For those of you who didn’t know, MongoDB is a high-performance, highly scalable document-oriented NoSQL database. Unlike in SQL databases where data is stored in rows and columns inside tables, in MongoDB, data is structured in JSON-like format inside records which are referred to as documents. The open-source attribute of MongoDB as a database software makes it an ideal candidate for almost any database-related project. This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple and assumes you are running in the root account, if not you may need to add ‘sudo‘ to the commands to get root privileges. I will show you the step-by-step installation of the MongoDB NoSQL database on AlmaLinux 9. You can follow the same instructions for CentOS and Rocky Linux.

  • An introduction (and how-to) to Plugin Loader for the Steam Deck. - Invidious
  • Self-host a Ghost Blog With Traefik

    Ghost is a very popular open-source content management system. Started as an alternative to WordPress and it went on to become an alternative to Substack by focusing on membership and newsletter. The creators of Ghost offer managed Pro hosting but it may not fit everyone's budget. Alternatively, you can self-host it on your own cloud servers. On Linux handbook, we already have a guide on deploying Ghost with Docker in a reverse proxy setup. Instead of Ngnix reverse proxy, you can also use another software called Traefik with Docker. It is a popular open-source cloud-native application proxy, API Gateway, Edge-router, and more. I use Traefik to secure my websites using an SSL certificate obtained from Let's Encrypt. Once deployed, Traefik can automatically manage your certificates and their renewals. In this tutorial, I'll share the necessary steps for deploying a Ghost blog with Docker and Traefik.