Language Selection

English French German Italian Portuguese Spanish

Linux Devices and OSL/OpenLeg

Filed under
Hardware
OSS
  • Open-Source Computer Nonprofit Introduces New, More Powerful Model

    The BeagleBoard.org Foundation, the Oakland Township-based open-source computer nonprofit, has announced the availability of BeagleBone AI, the newest, fastest, most powerful BeagleBone low cost computer yet.

    Built on the foundation’s open source Linux approach, BeagleBone AI fills the gap between small single board computers and more powerful industrial computers. Using the Texas Instruments Sitara AM5729 processor, developers have access to powerful machine learning capabilities with the ease of the BeagleBone Black header and mechanical compatibility.

  • USB Armory Mk II open source USB computer for security applications

    Developers or enthusiasts building security applications may be interested in a tiny open source USB computer called the USB armory Mk II. Created by F-Secure Foundry the USB computer has been specifically designed with security applications in mind and is now available to back by the Crowd Supply website. The “security-minded” USB-C computer runs LinuxAnd features a 900 MHz ARM processor, 512 MB RAM, Bluetooth and USB-C connection. Watch the video below to learn more about the small form factor USB computer designed from the ground up with information security applications in mind.

    “The USB armory Mk II hardware is supported by standard software environments and requires very little customization. In fact, vanilla Linux kernels and standard distributions run seamlessly on the tiny board. High Assurance Boot (HABv4). The HAB feature enables on-chip internal Boot ROM authentication of the initial bootloader (i.e., Secure Boot) with a digital signature, establishing the first trust anchor for code authentication.”

  • TechNexion XORE is a tiny NXP i.MX 8M Mini LGA System-on-Module
  • AI and open sourcing: a new frontier for prosthetic leg design

    Open-source projects allow clinicians to piggyback off of each other’s research and create the best artificial limbs possible. Scientists from the University of Michigan have now unveiled an artificially intelligent prosthetic leg that fellow researchers can access through open-sourcing, a development which has the potential to revolutionise the prosthetic leg industry.

    [...]

    Through this website, researchers are able to access the specific materials used to construct the OSL, alongside the vendors they can access these materials through. The leg has been designed using motor technology developed for the drone industry, with flat pancake-style motors inside which trade speed for torque. This allows the user to have more efficient control over their prosthetic and lets them walk more naturally.

    Once the leg is constructed, researchers using the OSL can download the AI software, which tells the leg how to move. The resulting algorithmic data from different users of the OSL is also designed to be open-source. The common platform enables direct comparisons of different uses of the software, which researchers can then merge and build upon.

    The full bionic leg, made according to the website’s specifications, will cost each manufacturer $28,500.

    As well as being robust and fairly inexpensive – the full bionic leg, made according to the website’s specifications, will cost each manufacturer $28,500 – the system is designed to be straightforward and easy to manufacture. Videos online detail each step of the building process.

  • OpenLeg, a new open source project for building robot legs

    Navigating multi-level environments, including stairs and unstructured environments such as a floor with debris or uneven terrain, is difficult for wheeled robots. Legged robots such as quadrupeds are able to excel in these environments. However, it’s far easier to give robot a wheel than to give a robot leg or wings. How about doing so with an open-source leg?

    This can be possible, thanks to the OpenLeg, a new open source project for building robot legs. The idea behind the project – created by Joey Byrnes and the team at the University of Illinois – is to create a robot leg that others can use to build four-legged robots that is compatible with the surrounding environment.

A USB-C Thumb Drive Based Linux Computer For Pentesters

  • USB Armory MkII: A USB-C Thumb Drive Based Linux Computer For Pentesters

    While it might look like a disrobed flash drive or RTL-SDR dongle, the USB Armory Mk II is actually a full-fledged open hardware computer built into the ubiquitous USB “stick” format. But more than just that, it’s optimized for security research and boasts a list of features that are sure to get the attention of any pentesters in the audience. Fine tuned thanks to the feedback developer [Inverse Path] received about the original version of the hardware, the Mk II promises to be the last word in secure mobile computing.

    Compared to the original hardware, the most obvious change is the switch to USB-C. The previous USB Armory used traces on the PCB to plug directly into a USB Type-A port, but this time around [Inverse Path] has put a proper male connector on the front of the board. Nominally, the USB Armory is plugged into a host computer to provide it with power and a network connection, though it also has the ability to disguise itself as a storage or input device for more stealthy applications. There’s also a female USB-C port on the Mk II, which can be used to connect additional devices, a feature the previous version lacked.

Comment viewing options

Select your preferred way to display the comments and click "Save settings" to activate your changes.

More in Tux Machines

digiKam 7.7.0 is released

After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release. Read more

Dilution and Misuse of the "Linux" Brand

Samsung, Red Hat to Work on Linux Drivers for Future Tech

The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world. Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility. Read more

today's howtos

  • How to install go1.19beta on Ubuntu 22.04 – NextGenTips

    In this tutorial, we are going to explore how to install go on Ubuntu 22.04 Golang is an open-source programming language that is easy to learn and use. It is built-in concurrency and has a robust standard library. It is reliable, builds fast, and efficient software that scales fast. Its concurrency mechanisms make it easy to write programs that get the most out of multicore and networked machines, while its novel-type systems enable flexible and modular program constructions. Go compiles quickly to machine code and has the convenience of garbage collection and the power of run-time reflection. In this guide, we are going to learn how to install golang 1.19beta on Ubuntu 22.04. Go 1.19beta1 is not yet released. There is so much work in progress with all the documentation.

  • molecule test: failed to connect to bus in systemd container - openQA bites

    Ansible Molecule is a project to help you test your ansible roles. I’m using molecule for automatically testing the ansible roles of geekoops.

  • How To Install MongoDB on AlmaLinux 9 - idroot

    In this tutorial, we will show you how to install MongoDB on AlmaLinux 9. For those of you who didn’t know, MongoDB is a high-performance, highly scalable document-oriented NoSQL database. Unlike in SQL databases where data is stored in rows and columns inside tables, in MongoDB, data is structured in JSON-like format inside records which are referred to as documents. The open-source attribute of MongoDB as a database software makes it an ideal candidate for almost any database-related project. This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple and assumes you are running in the root account, if not you may need to add ‘sudo‘ to the commands to get root privileges. I will show you the step-by-step installation of the MongoDB NoSQL database on AlmaLinux 9. You can follow the same instructions for CentOS and Rocky Linux.

  • An introduction (and how-to) to Plugin Loader for the Steam Deck. - Invidious
  • Self-host a Ghost Blog With Traefik

    Ghost is a very popular open-source content management system. Started as an alternative to WordPress and it went on to become an alternative to Substack by focusing on membership and newsletter. The creators of Ghost offer managed Pro hosting but it may not fit everyone's budget. Alternatively, you can self-host it on your own cloud servers. On Linux handbook, we already have a guide on deploying Ghost with Docker in a reverse proxy setup. Instead of Ngnix reverse proxy, you can also use another software called Traefik with Docker. It is a popular open-source cloud-native application proxy, API Gateway, Edge-router, and more. I use Traefik to secure my websites using an SSL certificate obtained from Let's Encrypt. Once deployed, Traefik can automatically manage your certificates and their renewals. In this tutorial, I'll share the necessary steps for deploying a Ghost blog with Docker and Traefik.