Language Selection

English French German Italian Portuguese Spanish

today's howtos

Filed under
HowTos
  • How To Install DNSCrypt on Ubuntu 20.04 LTS - idroot

    In this tutorial, we will show you how to install DNSCrypt on Ubuntu 20.04 LTS. For those of you who didn’t know, DNSCrypt is a flexible DNS proxy, with support for modern encrypted DNS protocols such as DNSCrypt v2, DNS-over-HTTPS, Anonymized DNSCrypt, and ODoH (Oblivious DoH).

    This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple and assumes you are running in the root account, if not you may need to add ‘sudo‘ to the commands to get root privileges. I will show you the step-by-step installation of the DNSCrypt on Ubuntu 20.04 (Focal Fossa). You can follow the same instructions for Ubuntu 18.04, 16.04, and any other Debian-based distribution like Linux Mint.

  • Getting DTS 5.1+ sound via S/PDIF or HDMI using PulseAudio – Michał Górny

    While PCs still usually provide a full set of analog jacks capable of outputting a 5.1 audio, other modern hardware (such as TVs) is usually limited to digital audio outputs (and sometimes analog outputs limited to stereo sound). These outputs are either S/PDIF (coaxial or optical) or HDMI. When the PC is connected to a TV, a pretty logical setup is to carry the sound via HDMI to the TV, and from there via S/PDIF or HDMI ARC to a 5.1 amplifier. However, it isn’t always as simple as it sounds.

    For a start, S/PDIF is a pretty antiquated interface originally designed to carry stereo PCM audio. The modern versions of the interface have sufficient bandwidth for up to 192 kHz sampling rate and up to 24 bit audio depth. However, in order to support more than two audio channels, the transmitted sound needs to be compressed. S/PDIF hardware usually supports MPEG, AC3 and DTS formats.

    HDMI is better there. HDMI 1.2 technically supports up to 8 channels of PCM audio, 2.0 up to 32 channels. However, not all hardware actually supports that. In particular, my TV seems to only support stereo PCM input, and ignores additional channels when passed 5.1 audio. Fortunately, additional audio channels work when compressed input is used. HDMI supports more audio formats, including DTS-HD MA and TrueHD.

    In this post, I’d like to shortly explore our options for making a PulseAudio-enabled Linux system output compressed 5.1 over S/PDIF or HDMI (apparently both are treated the same from ALSA/PulseAudio perspective).

  • How to set up ZFS ARC size on Ubuntu/Debian Linux - nixCraft

    hen working with Ubuntu, Debian Linux, and ZFS, you will run into ZFS cache size problems. You see, not all Ubuntu or Debian servers need aggressive file caching. Some servers act as a web server or run Linux container workloads or KVM guest VMs where you want those guest VMs to manage their own caching. Therefore, it would be best to have tons of ECC RAM for ZFS. Unfortunately, not all projects get that kind of extravagance in real life. This page explains how to set up ZFS arc size on Ubuntu/Debian or any Linux distro of your choice. So that, Linux kernel avoid running out of memory.

  • GNU Linux Debian – security-tracker.debian.org tracker status release stable – semi-manual system update method vs full automatic updates – apt can do https now: update /etc/apt/sources.list http -> https
  • How to dual-boot Windows 11 and Linux on your PC

    Microsoft is preparing to release Windows 11 later this year, and so far, it looks like a major improvement over Windows 10. It has a brand-new visual design that’s more consistent and attractive, and it includes some big new features like support for Android apps. As good as it may be though, it doesn’t necessarily fit every workload or preference. What if you prefer Linux or need it for certain tasks? In this guide, we’ll show how you to set up your PC so you can dual-boot into either Linux or Windows 11 whenever you want.

More in Tux Machines

digiKam 7.7.0 is released

After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release. Read more

Dilution and Misuse of the "Linux" Brand

Samsung, Red Hat to Work on Linux Drivers for Future Tech

The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world. Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility. Read more

today's howtos

  • How to install go1.19beta on Ubuntu 22.04 – NextGenTips

    In this tutorial, we are going to explore how to install go on Ubuntu 22.04 Golang is an open-source programming language that is easy to learn and use. It is built-in concurrency and has a robust standard library. It is reliable, builds fast, and efficient software that scales fast. Its concurrency mechanisms make it easy to write programs that get the most out of multicore and networked machines, while its novel-type systems enable flexible and modular program constructions. Go compiles quickly to machine code and has the convenience of garbage collection and the power of run-time reflection. In this guide, we are going to learn how to install golang 1.19beta on Ubuntu 22.04. Go 1.19beta1 is not yet released. There is so much work in progress with all the documentation.

  • molecule test: failed to connect to bus in systemd container - openQA bites

    Ansible Molecule is a project to help you test your ansible roles. I’m using molecule for automatically testing the ansible roles of geekoops.

  • How To Install MongoDB on AlmaLinux 9 - idroot

    In this tutorial, we will show you how to install MongoDB on AlmaLinux 9. For those of you who didn’t know, MongoDB is a high-performance, highly scalable document-oriented NoSQL database. Unlike in SQL databases where data is stored in rows and columns inside tables, in MongoDB, data is structured in JSON-like format inside records which are referred to as documents. The open-source attribute of MongoDB as a database software makes it an ideal candidate for almost any database-related project. This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple and assumes you are running in the root account, if not you may need to add ‘sudo‘ to the commands to get root privileges. I will show you the step-by-step installation of the MongoDB NoSQL database on AlmaLinux 9. You can follow the same instructions for CentOS and Rocky Linux.

  • An introduction (and how-to) to Plugin Loader for the Steam Deck. - Invidious
  • Self-host a Ghost Blog With Traefik

    Ghost is a very popular open-source content management system. Started as an alternative to WordPress and it went on to become an alternative to Substack by focusing on membership and newsletter. The creators of Ghost offer managed Pro hosting but it may not fit everyone's budget. Alternatively, you can self-host it on your own cloud servers. On Linux handbook, we already have a guide on deploying Ghost with Docker in a reverse proxy setup. Instead of Ngnix reverse proxy, you can also use another software called Traefik with Docker. It is a popular open-source cloud-native application proxy, API Gateway, Edge-router, and more. I use Traefik to secure my websites using an SSL certificate obtained from Let's Encrypt. Once deployed, Traefik can automatically manage your certificates and their renewals. In this tutorial, I'll share the necessary steps for deploying a Ghost blog with Docker and Traefik.