RISC-V based ESP32-C3 DevKit and Arduino

-
RISC-V based ESP32-C3 DevKit supports Rust
The ESP32-C3-DevKit-RUST-1 is a development board that features the RISC-V architecture through the single-core ESP32-C3 System-on-Chip (SoC). In addition to wireless connectivity, this dev kit offers a 6-DoF IMU, a Li-Ion battery charger and it can be programmed with Rust.
The RISC-V based processor found on this board has been seen recently in other platforms, i.e. the XIAO ESP32C3 and the ICE-V Wireless. For reference, the processor used is a 32-bit RISC-V single core processor with a maximum frequency of 160MHz.
-
Industrial IoT anomaly detection on microcontrollers | Arduino Blog
Consumer IoT (Internet of Things) devices provide convenience and the consequences of a failure are minimal. But industrial IoT (IIoT) devices monitor complex and expensive machinery. When that machinery fails, it can cost serious money. For that reason, it is important that technicians get alerts as soon as an abnormality in operation occurs. That’s why Tomasz Szydlo at AGH University of Science and Technology in Poland researched IIoT anomaly detection techniques for low-cost microcontrollers.
When you only have a single sensor value to monitor, it is easy to detect an anomaly. For example, it is easy for your car to identify when engine temperature exceeds an acceptable range and then turn on a warning light. But this becomes a serious challenge when a complex machine has many sensors with values that vary depending on conditions and jobs — like a car engine becoming hot because of hard acceleration or high ambient temperatures, as opposed to a cooling problem.
-
- Login or register to post comments
Printer-friendly version- 1319 reads
PDF version
More in Tux Machines
- Highlights
- Front Page
- Latest Headlines
- Archive
- Recent comments
- All-Time Popular Stories
- Hot Topics
- New Members
today's howtos
| Open Hardware: XON/XOFF and Raspberry Pi Pico
|
Security Leftovers
| How to Apply Accent Colour in Ubuntu Desktop
A step-by-step tutorial on how to apply accent colour in Ubuntu desktop (GNOME) with tips for Kubuntu and others.
|



This section of TuxMachines will no longer have new stories in it (with some caveats, including this post). To see the latest stories go to

.svg_.png)
Content (where original) is available under CC-BY-SA, copyrighted by original author/s.


Recent comments
2 days 5 hours ago
2 days 9 hours ago
2 days 9 hours ago
3 days 16 hours ago
3 days 17 hours ago
3 days 18 hours ago
3 days 18 hours ago
3 days 19 hours ago
3 days 21 hours ago
3 days 23 hours ago