Open Hardware/Modding: RISC-V, Arduino, and Raspberry Pi

-
YD-CH32V307VCT6 RISC-V MCU board comes with Ethernet and plenty of I/Os - CNX Software
At the beginning of the year, we wrote about WCH CH32V307 RISC-V microcontroller and a development board with 8 UART ports controlled over Ethernet. I’ve now been informed of a similar, but much more compact by VCC-GND Studio named “YD-CH32V307VCT6”.
Besides the 144 MHz RISC-V microcontroller, the board features a 10Mbps Ethernet port, two USB Type-C ports, SPI flash, EEPROM, a microSD card socket, and four rows of 24 pins each for a total of 96 pins exposing all pins out of the LQFP100 package.
-
Arduino-based MIDI controller brings Minimoog Model D synthesizer back to life (Crowdfunding) - CNX Software
ΔMIDI 001:model D is an Arduino-based MIDI controller inspired by the Minimoog Model D synthesizer first introduced in the early 1970’s, but not in production anymore.
The MIDI controller is compatible with VST (Virtual Studio Technology) plugins designed for the Minimoog synthesizer, DAWs (Digital Audio Workstation), and as an open-source, can be directly modified or tweaked by its user.
-
can2040 project adds software CAN bus to Raspberry Pi RP2040 microcontroller - CNX Software
The can2040 project is a software CAN bus implementation for the Raspberry Pi RP2040 microcontroller that leverages programmable I/Os (PIO) to achieve reading and writing CAN 2.0B data frames at rates up to 1Mbit per second.
Kevin O’Connor, the developer of the project, further explains the implementation uses only one of the two RP2040 PIO hardware blocks, so it is possible for a single Raspberry Pi RP2040 chip to have two separate CAN bus interfaces.
-
- Login or register to post comments
Printer-friendly version- 843 reads
PDF version
More in Tux Machines
- Highlights
- Front Page
- Latest Headlines
- Archive
- Recent comments
- All-Time Popular Stories
- Hot Topics
- New Members
today's howtos
| Open Hardware: XON/XOFF and Raspberry Pi Pico
|
Security Leftovers
| How to Apply Accent Colour in Ubuntu Desktop
A step-by-step tutorial on how to apply accent colour in Ubuntu desktop (GNOME) with tips for Kubuntu and others.
|



This section of TuxMachines will no longer have new stories in it (with some caveats, including this post). To see the latest stories go to

.svg_.png)
Content (where original) is available under CC-BY-SA, copyrighted by original author/s.


Recent comments
2 days 3 hours ago
2 days 7 hours ago
2 days 7 hours ago
3 days 14 hours ago
3 days 15 hours ago
3 days 16 hours ago
3 days 16 hours ago
3 days 17 hours ago
3 days 19 hours ago
3 days 21 hours ago