Language Selection

English French German Italian Portuguese Spanish

Devices/Embedded Leftovers

Filed under
Hardware
  • Coffee Lake machine vision Mini-STX features eight USB 3.2 Gen2 and five M.2

    BIVROST unveiled a Linux-ready “Lite5” Mini-STX board based on Advantech’s 9th Gen Coffee Lake powered “SOM-5899” Basic Type 6 module and offering up to 96GB DDR4, 2x GbE, 2x HDMI, 8x USB 3.1 Gen2, and 5x M.2 slots.

    Poland-based BIVROST, which also offers a Pixelink PL-D755CU-BL industrial USB 3.0 camera, has launched a Mini-STX board for machine vision, signage, security, and other edge computing applications. The BIVROST Lite5 was manufactured by Advantech based on a BIVROST design and features Advantech’s “new” SOM-5899 COM Express Basic Type 6 module, equipped with 8th or 9th Gen Coffee Lake-H processors. Intel also assisted with the product, which starts at $2,618 with 16GB RAM, a 256GB SSD, and WiFi/BT.

  • Connecting an electric typewriter to a modern computer

    My blog post writing delay is huge right now, sorry for that, but here it finally is: the writeup of the typewriter technology I experimented with in January.

    This is about a SIGMA SM 8200i typewriter, which my parents gave to me for entertainment purposes when I was a child. Now that I’m older, the entertainment has shifted more towards the technical internals.

    When we talked about teletype technology at my local university hackerspace, Spline, I remembered the typewriter had a 26-pin connector. After some research, I learned that the machine is basically an Erika S3004, one of the most popular typewriters of the GDR, in a different case. With this new knowledge, I was able to find a table of commands which can be sent and received from the device.

    The 26-pin connector is a port used in the GDR, which speaks a faily standard rs232 protocol, with a baud-rate of 1200. In fact, the USB TTL adapter I usually use for routers, worked on it after some creative wiring.

  • Reverse-engineering the waveform generator in a 1969 breadboard

    How hard could it be to fix a vintage solderless breadboard that doesn't quite work? The "elite 2 circuit design test system" below combined a solderless breadboard with some supporting circuitry: power supplies, a waveform generator, a pulse generator, switches, and lights. CuriousMarc found one of these breadboards on eBay, but the function generator didn't work, so we set out to repair it.

  • Environmental sensors (SCD41 CO₂)

    However, there is now an SCD41, which is much smaller, and neater. It talks a similar but different protocol - slightly more sane in providing simple integer values (with a scale+offset for temperature) rather than actual "floats" in 32 bit words. They use I²C protocol with CRC checks on each 2 bytes - yeh, special!

  • 3D print you own replica Astro Pi flight case
  • Weekly Update (10/2022): Squeekboard gets a new look, Nheko 0.9.2, Dirty Pipes and Tow-Boot being released for PinePhone and PinePhone Pro [Ed: Summary of developers around GNU/Linux in mobile, preceded by exaggeration and FUD, citing Microsoft sources]

    There's some good news and some bad news. Dirty Pipe is not a fun vulnerability, and our GNU/Linux Phones have new enough kernels to be vulnerable. At least that new Spectre variant does not affect Cortex A53 phones - having in-order cores only is not always disadvantageous.

More in Tux Machines

digiKam 7.7.0 is released

After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release. Read more

Dilution and Misuse of the "Linux" Brand

Samsung, Red Hat to Work on Linux Drivers for Future Tech

The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world. Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility. Read more

today's howtos

  • How to install go1.19beta on Ubuntu 22.04 – NextGenTips

    In this tutorial, we are going to explore how to install go on Ubuntu 22.04 Golang is an open-source programming language that is easy to learn and use. It is built-in concurrency and has a robust standard library. It is reliable, builds fast, and efficient software that scales fast. Its concurrency mechanisms make it easy to write programs that get the most out of multicore and networked machines, while its novel-type systems enable flexible and modular program constructions. Go compiles quickly to machine code and has the convenience of garbage collection and the power of run-time reflection. In this guide, we are going to learn how to install golang 1.19beta on Ubuntu 22.04. Go 1.19beta1 is not yet released. There is so much work in progress with all the documentation.

  • molecule test: failed to connect to bus in systemd container - openQA bites

    Ansible Molecule is a project to help you test your ansible roles. I’m using molecule for automatically testing the ansible roles of geekoops.

  • How To Install MongoDB on AlmaLinux 9 - idroot

    In this tutorial, we will show you how to install MongoDB on AlmaLinux 9. For those of you who didn’t know, MongoDB is a high-performance, highly scalable document-oriented NoSQL database. Unlike in SQL databases where data is stored in rows and columns inside tables, in MongoDB, data is structured in JSON-like format inside records which are referred to as documents. The open-source attribute of MongoDB as a database software makes it an ideal candidate for almost any database-related project. This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple and assumes you are running in the root account, if not you may need to add ‘sudo‘ to the commands to get root privileges. I will show you the step-by-step installation of the MongoDB NoSQL database on AlmaLinux 9. You can follow the same instructions for CentOS and Rocky Linux.

  • An introduction (and how-to) to Plugin Loader for the Steam Deck. - Invidious
  • Self-host a Ghost Blog With Traefik

    Ghost is a very popular open-source content management system. Started as an alternative to WordPress and it went on to become an alternative to Substack by focusing on membership and newsletter. The creators of Ghost offer managed Pro hosting but it may not fit everyone's budget. Alternatively, you can self-host it on your own cloud servers. On Linux handbook, we already have a guide on deploying Ghost with Docker in a reverse proxy setup. Instead of Ngnix reverse proxy, you can also use another software called Traefik with Docker. It is a popular open-source cloud-native application proxy, API Gateway, Edge-router, and more. I use Traefik to secure my websites using an SSL certificate obtained from Let's Encrypt. Once deployed, Traefik can automatically manage your certificates and their renewals. In this tutorial, I'll share the necessary steps for deploying a Ghost blog with Docker and Traefik.