Language Selection

English French German Italian Portuguese Spanish

IBM/Red Hat/Fedora Leftovers

Filed under
Red Hat
  • Firmware Software Bill of Materials

    A Software Bill of Materials (aka SBoM) is something you’ve probably never heard of, but in future years they’ll hopefully start to become more and more important. In May last year the US president issued an executive order titled Improving the Nation’s Cybersecurity in which it outlines the way that critical software used by various branches of the government should be more traceable and secure. One of the key information captured in a SBoM is “who built what from where” which in open source we’re already familiar with, e.g. “Red Hat built your Linux kernel in a datacenter in the US” rather than “random person from the internet build your container on their laptop using Debian Sarge” and in the former case we also always have the hash of the source archive that was used to build it, and a lot more. Where this concept breaks down is firmware, where lots of different entities build each subsection in different ways, usually due to commercial and technical constraints.

    Firmware is often lumped together as one thing, both technically as-in “one download” and conceptually when thinking about OS security. In reality a single firmware image might contain a FSP from Intel, several updated CPU microcode blobs for a few different CPUs, a CSME management engine, an embedded controller update, a UEFI system firmware a lot more. The system firmware is then made up of different file volumes, each with a few dozen EFI “PEI” binaries for initial system start-up and then a couple of hundred (!) “DXE” binaries for things like pre-boot networking and things like fingerprint authentication, mouse and keyboard input.

    In the executive order from last May, firmware was explicitly excluded from the list of software that required a SBoM, on the logic that none of the infrastructure or specifications were in place, and it just wasn’t possible to do. Needless to say I’ve been spending the last few months putting all the pieces together to make a firmware SBoM not just possible, but super easy for OEMs, ODMs and IBVs to generate.

  • Fedora inches closer to dropping x86-32 support

    Following discussion on the mailing list, the Fedora team is taking another small step away from x86-32 support, with developers urged to stop building i686 versions of "leaf packages" – in other words, packages that nothing else depends upon.

    This means building applications for 32-bit chips, not the Linux distribution itself. That's long gone. Various distros started to discuss dropping 32-bit support in 2016. Ubuntu stopped offering an i386 desktop installation image after version 17.04 and a server image after 17.10. (For the especially pedantic: there was a netboot image for 18.04 if you wanted to roll your own, and Lubuntu offered a 32-bit desktop of 18.10.)

  • Modular Perl in Red Hat Enterprise Linux 8

    Red Hat Enterprise Linux in version 8 (RHEL 8) comes with modules, a packaging concept that allows system administrators to select the desired software version from multiple packaged versions. This article shows you how to manage Perl as a module, as well as how to manage the CPAN modules provided by Perl, in RHEL 8.

  • Which is better: A single Kafka cluster to rule them all, or many?

    Apache Kafka is designed for performance and large volumes of data. Kafka's append-only log format, sequential I/O access, and zero copying all support high throughput with low latency. Its partition-based data distribution lets it scale horizontally to hundreds of thousands of partitions.

    Because of these capabilities, it can be tempting to use a single monolithic Kafka cluster for all of your eventing needs. Using one cluster reduces your operational overhead and development complexities to a minimum. But is "a single Kafka cluster to rule them all" the ideal architecture, or is it better to split Kafka clusters?

  • Kafka Monthly Digest: February 2022

    This 49th edition of the Kafka Monthly Digest covers what happened in the Apache Kafka community in February 2022. Some new minor releases are in the works that may be of interest. I'll also discuss new KIPs and open source releases in January 2022.

  • IT leadership: 3 strategies to build employee development programs

    In today's fast-evolving hybrid work environment, it's more important than ever to offer your IT employees professional development opportunities. Consider this expert advice to design a program with impact

  • Red Hat Summit 2022 registration is now open

    Red Hat Summit 2022 registration is officially open! Red Hat Summit is taking place on May 10 and May 11, and you can sign up today! If you want to take part in all of this year’s virtual Red Hat Summit goodness, you should take a few moments to register now.

More in Tux Machines

digiKam 7.7.0 is released

After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release. Read more

Dilution and Misuse of the "Linux" Brand

Samsung, Red Hat to Work on Linux Drivers for Future Tech

The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world. Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility. Read more

today's howtos

  • How to install go1.19beta on Ubuntu 22.04 – NextGenTips

    In this tutorial, we are going to explore how to install go on Ubuntu 22.04 Golang is an open-source programming language that is easy to learn and use. It is built-in concurrency and has a robust standard library. It is reliable, builds fast, and efficient software that scales fast. Its concurrency mechanisms make it easy to write programs that get the most out of multicore and networked machines, while its novel-type systems enable flexible and modular program constructions. Go compiles quickly to machine code and has the convenience of garbage collection and the power of run-time reflection. In this guide, we are going to learn how to install golang 1.19beta on Ubuntu 22.04. Go 1.19beta1 is not yet released. There is so much work in progress with all the documentation.

  • molecule test: failed to connect to bus in systemd container - openQA bites

    Ansible Molecule is a project to help you test your ansible roles. I’m using molecule for automatically testing the ansible roles of geekoops.

  • How To Install MongoDB on AlmaLinux 9 - idroot

    In this tutorial, we will show you how to install MongoDB on AlmaLinux 9. For those of you who didn’t know, MongoDB is a high-performance, highly scalable document-oriented NoSQL database. Unlike in SQL databases where data is stored in rows and columns inside tables, in MongoDB, data is structured in JSON-like format inside records which are referred to as documents. The open-source attribute of MongoDB as a database software makes it an ideal candidate for almost any database-related project. This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple and assumes you are running in the root account, if not you may need to add ‘sudo‘ to the commands to get root privileges. I will show you the step-by-step installation of the MongoDB NoSQL database on AlmaLinux 9. You can follow the same instructions for CentOS and Rocky Linux.

  • An introduction (and how-to) to Plugin Loader for the Steam Deck. - Invidious
  • Self-host a Ghost Blog With Traefik

    Ghost is a very popular open-source content management system. Started as an alternative to WordPress and it went on to become an alternative to Substack by focusing on membership and newsletter. The creators of Ghost offer managed Pro hosting but it may not fit everyone's budget. Alternatively, you can self-host it on your own cloud servers. On Linux handbook, we already have a guide on deploying Ghost with Docker in a reverse proxy setup. Instead of Ngnix reverse proxy, you can also use another software called Traefik with Docker. It is a popular open-source cloud-native application proxy, API Gateway, Edge-router, and more. I use Traefik to secure my websites using an SSL certificate obtained from Let's Encrypt. Once deployed, Traefik can automatically manage your certificates and their renewals. In this tutorial, I'll share the necessary steps for deploying a Ghost blog with Docker and Traefik.