Hardware Projects With Arduino, Linux Etc.

-
IR Translator Makes Truly Universal Remote | Hackaday
Universal remotes are a handy tool to have around if you have many devices that would all otherwise have their own remote controls. Merging them all into a single device leads to less clutter and less frustration, but they are often not truly “universal” as some of them may not support every infrared device that has ever been built. If you’re in a situation like that it’s possible to build a truly universal remote instead, provided you have a microcontroller and a few infrared LEDs on hand.
This was the situation that [Matt] found himself in when his Amazon Fire TV equipment control feature didn’t support his model of speakers. To get around this he programmed an Arduino to essentially translate the IR codes from the remote and output a compatible set of codes to the speakers.This requires both an IR photodiode and an IR LED but little else other than the codes for the remote and the equipment in question. With that all set up and programmed into the Arudino, [Matt]’s remote is one step closer to being truly “universal”.
-
Regional, OPEN microprocessors keep getting closer
One of the positive things of this week is how it showed that this is a great time for microprocessors done right, in the right places.
First, Intel announced that it will invest a lot of money in open-source RISC-V processors. In the same round, Intel also announced a billion-dollar fund that will, among other things, “enable modular products with an open chiplet platform”.
This shows that a colossus like Intel “sees a future in which ARM, x86, and RISC-V all play major roles.”
Equally good, in a different but related way, is yesterday’s news that nVidia failed to buy the firm that designs ARM microprocessors, in what would have been “the largest semiconductor deal on record.”
[...]
just consider that OPEN system-on-chips are good for everybody, because every part of the world, not just the EU (finally!) or India should have their REGIONAL microprocessors. Because what is concretely “eating the world” may be software, but software cannot exist without microprocessors that run it. -
ICARUS Elkhart Lake Pico-ITX board targets IoT, AIoT, and computer vision applications - CNX Software
SECO ICARUS is a Pico-ITX single board computer based on Intel Atom x6000E, Celeron, and Pentium Elkhart Lake processor that’s designed for edge IoT, AIoT, and computer vision applications.
The SBC ships with up to 16GB DDR4 IBECC (in-band error-correcting code) memory, eMMC flash and/or SATA storage, supports up to three independent displays, features two Gigabit Ethernet ports with TSN support, M.2 sockets for WiFi/Bluetooth and cellular connectivity, several USB ports, serial ports, and other I/O interfaces.
-
Elkhart Lake powers Pico-ITX, Qseven, and SMARC boards
Seco unveiled a Linux-ready “Icarus” Pico-ITX SBC and “Atlas” Qseven module built on Elkhart Lake with up to 16GB soldered LPDDR4-3200 IBECC and triple display support. Seco recently launched an Elkhart Lake-based “Halley” SMARC module.
Seco Edge, the embedded unit of Italian hardware manufacturer Seco, has announced two products that run Yocto-flavored Linux or Win 10 IoT Enterprise on Intel’s 10nm Elkhart Lake Atom x6000 family. The Icarus is a 100 x 72mm Pico-ITX board and the Atlas is a Qseven module. In late 2021, the company also announced a Halley SMARC module based on Elkhart Lake (see farther below).
-
Making Light Of Superconductors | Hackaday
Once upon a time, making a superconductor required extremely cold temperatures. Scientists understood why superconducting materials could move electrons without loss, but the super cold temperatures were a problem. Then in 1986, a high-temperature superconductor was found. High temperature, of course, is a relative term. The new material works when cooled to a frosty temperature, just not a few degrees off of absolute zero like a conventional superconductor. Since then, the race has been on to find a room-temperature superconductor that doesn’t require other exotic conditions, such as extreme pressure. Department of Energy scientists may have found a different path to get there: X-ray light.
The problem is that scientists don’t fully understand why these high-temperature superconductors work. To study the material, YBCO, scientists chill a sample to it superconducting state and then use a magnetic field to disrupt the superconductivity to study the material’s normal state. The new research has shown that a pulse of light can also disrupt the superconductivty, although the resulting state is unstable.
-
Tilting At Windmills Nine Bits At A Time | Hackaday
In the old days — we are talking like the 1960s and 1970s — computers were often built for very specific purposes using either discrete logic or “bit slice” chips. Either way, more bits meant more money so frequently these computers were made with just enough bits to meet a required precision. We don’t think that was what was on [Mad Ned’s] mind, though, when he decided to implement a 9-bit CPU called QIXOTE-1 on an FPGA.
Like many hobby projects, this one started with an FPGA board in search of a problem. At first, [Ned] had a plan to create a custom computer along with a custom language to then produce a video game. A quick search on the Internet led to that being a common enough project with one guy that we’ve talked about here on Hackaday before knocking it out of the park.
[Ned] then thought about just doing a no-software video game. Too late to be the first to do that. Not to be deterred, he decided to duplicate the PDP-8. Whoops. That’s been done before, too. Wanting something original, he finally decided on a custom CPU. Since bytes are usually — if not technically — 8 bits, this CPU calls its 9-bit words nonads and uses octal which maps nicely to three digits per nonad.
-

- Login or register to post comments
Printer-friendly version- 1978 reads
PDF version
More in Tux Machines
- Highlights
- Front Page
- Latest Headlines
- Archive
- Recent comments
- All-Time Popular Stories
- Hot Topics
- New Members
digiKam 7.7.0 is released
After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release.
|
Dilution and Misuse of the "Linux" Brand
|
Samsung, Red Hat to Work on Linux Drivers for Future Tech
The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world.
Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility.
|
today's howtos
|








.svg_.png)
Content (where original) is available under CC-BY-SA, copyrighted by original author/s.

Recent comments
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago