Language Selection

English French German Italian Portuguese Spanish

Arduino Leftovers

Filed under
Hardware
  • How to Read Analog Input and Serial Output

    To read the analog input of the Arduino the analogRead() function is used and the output of the read function is then displayed. Similarly, it can be said that if there is varying output of a device that is to be given to Arduino the analogRead() function can be used. Furthermore, the serial function in Arduino is used to print the output of the Arduino code. Here in this context reading of the analog input and the serial function is briefly explained by using analog read functions.

  • How to Interface LCD with Arduino in 4-bit and 8-bit Modes

    To display the output of an Arduino program mostly the liquid crystal display is used and there are two modes through which the display can be interfaced. One mode is using the four data pins from D4 to D7, and the other mode is using all the 8 data pins of the display that is from D0 to D7. The use of both modes of the 16×2 display is explained with the help of examples in this discourse.

  • How to Interface LCD with Arduino

    In Arduino programming there are multiple ways for displaying the output of the Arduino program or a project. One way of displaying the output is by using a display module and interfacing it with Arduino. This write-up discusses the interfacing of the liquid crystal display with the Arduino.

  • How to Use EEPROM library in Arduino

    In Arduino programming when a sketch is uploaded to the Arduino board it remains there and is stored in the Arduino until it is erased or another sketch is uploaded. This data is stored in the EEPROM built in the Arduino. The use of EEPROM and its library is explained in this following context.

  • Top Arduino Projects Ideas for Beginners

    To learn and work on the circuits for beginners Arduino is the simplest and the easiest way for them. So, to get familiar with the circuits one should start from making simple and easy circuits. So, we have given some start-up Arduino projects that can be helpful for the beginners to learn more about circuits and Arduino boards.

  • Arduino Liquid Crystal Library

    To display the output of an Arduino program there are multiple ways one of which is using the Liquid crystal display. To interface LCD with Arduino the library for the liquid crystal display is used and there are multiple functions of the library which can be used to perform various tasks for displaying the output.

More in Tux Machines

digiKam 7.7.0 is released

After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release. Read more

Dilution and Misuse of the "Linux" Brand

Samsung, Red Hat to Work on Linux Drivers for Future Tech

The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world. Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility. Read more

today's howtos

  • How to install go1.19beta on Ubuntu 22.04 – NextGenTips

    In this tutorial, we are going to explore how to install go on Ubuntu 22.04 Golang is an open-source programming language that is easy to learn and use. It is built-in concurrency and has a robust standard library. It is reliable, builds fast, and efficient software that scales fast. Its concurrency mechanisms make it easy to write programs that get the most out of multicore and networked machines, while its novel-type systems enable flexible and modular program constructions. Go compiles quickly to machine code and has the convenience of garbage collection and the power of run-time reflection. In this guide, we are going to learn how to install golang 1.19beta on Ubuntu 22.04. Go 1.19beta1 is not yet released. There is so much work in progress with all the documentation.

  • molecule test: failed to connect to bus in systemd container - openQA bites

    Ansible Molecule is a project to help you test your ansible roles. I’m using molecule for automatically testing the ansible roles of geekoops.

  • How To Install MongoDB on AlmaLinux 9 - idroot

    In this tutorial, we will show you how to install MongoDB on AlmaLinux 9. For those of you who didn’t know, MongoDB is a high-performance, highly scalable document-oriented NoSQL database. Unlike in SQL databases where data is stored in rows and columns inside tables, in MongoDB, data is structured in JSON-like format inside records which are referred to as documents. The open-source attribute of MongoDB as a database software makes it an ideal candidate for almost any database-related project. This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple and assumes you are running in the root account, if not you may need to add ‘sudo‘ to the commands to get root privileges. I will show you the step-by-step installation of the MongoDB NoSQL database on AlmaLinux 9. You can follow the same instructions for CentOS and Rocky Linux.

  • An introduction (and how-to) to Plugin Loader for the Steam Deck. - Invidious
  • Self-host a Ghost Blog With Traefik

    Ghost is a very popular open-source content management system. Started as an alternative to WordPress and it went on to become an alternative to Substack by focusing on membership and newsletter. The creators of Ghost offer managed Pro hosting but it may not fit everyone's budget. Alternatively, you can self-host it on your own cloud servers. On Linux handbook, we already have a guide on deploying Ghost with Docker in a reverse proxy setup. Instead of Ngnix reverse proxy, you can also use another software called Traefik with Docker. It is a popular open-source cloud-native application proxy, API Gateway, Edge-router, and more. I use Traefik to secure my websites using an SSL certificate obtained from Let's Encrypt. Once deployed, Traefik can automatically manage your certificates and their renewals. In this tutorial, I'll share the necessary steps for deploying a Ghost blog with Docker and Traefik.