Open Hardware Leftovers

-
Wheels for my PC were my favourite Christmas present this year • Eurogamer.net
2021 may not be the year of Linux on the desktop, but until the Steam Deck was delayed into early 2022, it certainly looked like it was going to be the year of Linux on the handheld.
-
How can AI-based analysis help educators support students?
-
3D Printed Sensor For Finding Wind Direction And Likely Much More | Hackaday
Have you ever wondered how an electronic wind vane translates a direction into a unique signal? It seems as though it might be very complicated, and indeed some of them are. [martinm] over at yoctopuce.com has an excellent writeup about measuring wind direction using just a single, easily printed disk and some phototransistors.
-
Geniatech spins two SBC options with RK3568
Geniatech’s “RK3568 Developer Board (K3-3568)” SBC builds on the quad -A55 SoC with up to 8GB DDR4, 2x GbE, HDMI in and out, MIPI-DSI and -CSI, a mic array, M.2, mini-PCIe, and a DVB-T2 tuner. A recent DB3568 version offers even more features.
Last February, Geniatech announced a RK3568 Development Board and RK3566 Development Board, which is identical except for using a slightly less I/O capable RK3566 instead of the RK3568. We were confused when Geniatech sent us a link to a new RK3568 Developer Board, until we realized it was a different model called the K3-3568. We then saw that our old RK3568 Developer Board product page link had changed to yet another design called the DB3568, which differed from the larger board we covered in that report, which is now used only for the RK3566 Developer Board. Here we look at the two RK3568-based models.
[...]
Both boards support Linux and Android.
-
i.MX 8M Plus solderable LGA module follows OSM Size-L standard - CNX Software
SGET Open Standard Module (OSM) specification was ratified in November 2020. It defined specifications for solderable LGA system-on-modules, and we first noticed it though through the launch of F&S Elektronik “FS 8MM OSM-SF” module powered by an NXP i.MX 8M Mini processor, and following OSM Size-S standard (30x30mm).
As we noted in our introduction about the Open Standard Module, SGET defined four sizes from Size-0 (30x15mm) to Size-L (45x45mm), and there’s now at least one “Large” OSM module courtesy of iWave Systems, and their iW-RainboW-G40M module equipped with an NXP i.MX 8M Plus processor for AI applications.
-

- Login or register to post comments
Printer-friendly version- 1194 reads
PDF version
More in Tux Machines
- Highlights
- Front Page
- Latest Headlines
- Archive
- Recent comments
- All-Time Popular Stories
- Hot Topics
- New Members
digiKam 7.7.0 is released
After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release.
|
Dilution and Misuse of the "Linux" Brand
|
Samsung, Red Hat to Work on Linux Drivers for Future Tech
The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world.
Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility.
|
today's howtos
|








.svg_.png)
Content (where original) is available under CC-BY-SA, copyrighted by original author/s.

Recent comments
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago