Language Selection

English French German Italian Portuguese Spanish

Kernel Articles From LWN (Just Released From Paywall)

Filed under
Linux
  • FIPS-compliant random numbers for the kernel [LWN.net]

    The Linux random-number generator (RNG) seems to attract an outsized amount of attention (and work) for what is, or seemingly should be, a fairly small component of the kernel. In part that is because random numbers, and their quality, are extremely important to a number of security protections, from unpredictable IP-packet sequence numbers to cryptographic keys. A recent post of version 43 of the Linux Random Number Generator (LRNG) by Stephan Müller is not likely to go any further than its predecessors, but the discussion around it may lead to support for a feature that some distributions need.

    The cover letter for the LRNG patch set is titled "/dev/random - a new approach", which is true, but also sure to elicit highly skeptical responses or cause the patches to be ignored entirely. As was reiterated in the discussion, kernel development generally does not proceed along the "wholesale replacement" path; features are added slowly, in bite-sized chunks, instead. But LRNG is meant to be a drop-in replacement for the existing kernel RNG, while adding a long list of additional features—some of which would likely be welcome if they were separated out.

  • A reference-count tracking infrastructure [LWN.net]

    Reference counts are a commonly used mechanism for tracking the life cycle of objects in a computing system. As long as every user of an object correctly maintains its references by incrementing and decrementing the reference count, that object will persist for as long as it is needed and will be properly destroyed once the last user is done. The "correctly" in that sentence is important, though; things do not work as well in the presence of reference-counting errors. Networking developer Eric Dumazet is working on a reference-count tracking system that could prove useful for finding these errors in the networking subsystem and, someday, throughout the kernel.

    Bugs in reference-count manipulation can be hard to find because the references themselves are anonymous. It may become clear, for example, that some user of an object has failed to release a reference before forgetting about that object, but there is generally no way to know which user has done this. So the kernel ends up with an unused object that cannot be released, but there is no way to know where the reference-counting mechanism failed, or even which reference was lost. If there were a way to determine which of (say) several dozen references to an object was leaked, the task of finding the erroneous release path would be made considerably easier.

  • A filesystem for namespaces [LWN.net]

    It is natural, when looking at the kernel development process, to focus on patches that find their way to acceptance and become a part of future kernels. But there can be value in looking at work that doesn't clear the bar; in failing, these patches often reveal things about the kernel and the community that creates it. Such is the case with the proof-of-concept namespacefs patch series recently posted by Yordan Karadzhov. One should not expect to see namespacefs in a future kernel but, in failing, this work showed a real use case and why it is hard to satisfy that use case in the kernel.
    Namespacefs is, as one might expect, a virtual filesystem implemented by the kernel. Its job is to display the hierarchy of namespaces running on the system; this information reflects the hierarchy of containers that are running. By using namespacefs, administrators can more readily see what is happening on their systems; it is also meant to facilitate complicated use cases like tracing multiple containers and watching how they interact.

    The initial implementation was limited to the PID and time namespaces. One can use it to traverse the hierarchy of PID namespaces (time namespaces are not hierarchical) and obtain the list of processes running in each. Other types of namespaces are not supported in this posting, but the intent was seemingly to add that support in a future version if namespacefs looked like the right solution to the problem.

  • Detecting missing memory barriers with KCSAN [LWN.net]

    Writing (correct) concurrent code that uses locking to avoid race conditions is difficult enough. When the objective is to use lockless algorithms, relying on memory barriers instead of locks to eliminate locking overhead, the problem becomes harder still. Bugs are easy to create and hard to find in this type of code. There may be some help on the way, though, in the form of this patch set from Marco Elver that enhances the Kernel Concurrency Sanitizer (KCSAN) with the ability to detect some types of missing memory barriers.

    KCSAN works in a statistical manner by watching accesses to specific memory addresses and trying to detect racy patterns; the algorithm used is described in this article. In its current form, though, KCSAN can only catch certain types of race conditions, specifically those that arise from locking errors. Other types of races remain invisible to this tool, including a number that can arise in incorrect lockless code. KCSAN is, by design, blind to the kinds of problems that occur when CPUs and memory controllers reorder the visibility of memory writes.

More in Tux Machines

digiKam 7.7.0 is released

After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release. Read more

Dilution and Misuse of the "Linux" Brand

Samsung, Red Hat to Work on Linux Drivers for Future Tech

The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world. Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility. Read more

today's howtos

  • How to install go1.19beta on Ubuntu 22.04 – NextGenTips

    In this tutorial, we are going to explore how to install go on Ubuntu 22.04 Golang is an open-source programming language that is easy to learn and use. It is built-in concurrency and has a robust standard library. It is reliable, builds fast, and efficient software that scales fast. Its concurrency mechanisms make it easy to write programs that get the most out of multicore and networked machines, while its novel-type systems enable flexible and modular program constructions. Go compiles quickly to machine code and has the convenience of garbage collection and the power of run-time reflection. In this guide, we are going to learn how to install golang 1.19beta on Ubuntu 22.04. Go 1.19beta1 is not yet released. There is so much work in progress with all the documentation.

  • molecule test: failed to connect to bus in systemd container - openQA bites

    Ansible Molecule is a project to help you test your ansible roles. I’m using molecule for automatically testing the ansible roles of geekoops.

  • How To Install MongoDB on AlmaLinux 9 - idroot

    In this tutorial, we will show you how to install MongoDB on AlmaLinux 9. For those of you who didn’t know, MongoDB is a high-performance, highly scalable document-oriented NoSQL database. Unlike in SQL databases where data is stored in rows and columns inside tables, in MongoDB, data is structured in JSON-like format inside records which are referred to as documents. The open-source attribute of MongoDB as a database software makes it an ideal candidate for almost any database-related project. This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple and assumes you are running in the root account, if not you may need to add ‘sudo‘ to the commands to get root privileges. I will show you the step-by-step installation of the MongoDB NoSQL database on AlmaLinux 9. You can follow the same instructions for CentOS and Rocky Linux.

  • An introduction (and how-to) to Plugin Loader for the Steam Deck. - Invidious
  • Self-host a Ghost Blog With Traefik

    Ghost is a very popular open-source content management system. Started as an alternative to WordPress and it went on to become an alternative to Substack by focusing on membership and newsletter. The creators of Ghost offer managed Pro hosting but it may not fit everyone's budget. Alternatively, you can self-host it on your own cloud servers. On Linux handbook, we already have a guide on deploying Ghost with Docker in a reverse proxy setup. Instead of Ngnix reverse proxy, you can also use another software called Traefik with Docker. It is a popular open-source cloud-native application proxy, API Gateway, Edge-router, and more. I use Traefik to secure my websites using an SSL certificate obtained from Let's Encrypt. Once deployed, Traefik can automatically manage your certificates and their renewals. In this tutorial, I'll share the necessary steps for deploying a Ghost blog with Docker and Traefik.