Language Selection

English French German Italian Portuguese Spanish

today's howtos

Filed under
HowTos
  • How to Change Airplane Mode Disable Behavior in Ubuntu 21.10 | UbuntuHandbook

    For those running Ubuntu on laptop or notebook, there’s an ‘Airplane Mode’ option available in Wi-Fi settings page. When it enabled, Wi-Fi, Bluetooth and mobile broadband are turned off to disable wireless signal transmissions.

    It’s usually good when to turn on the airplane mode. But, when disable this mode, Bluetooth gets turned on while user may only need Wi-Fi. So, a Gnome Extension ‘Sane Airplane Mode’ is created and allows to choose which devices to re-enable when disable the airplane mode.

  • How to Install / Enable RPM Fusion On CentOS 8 Stream - LinuxCapable

    RPM Fusion is a repository of add-on packages for Rhel-type distributions and EL+EPEL that a group of community volunteers maintains. RPM Fusion is not a standalone repository but an extension of CentOS’s default packages that could not be included due to CentOS being bound by the same legal restrictions as Red Hat.

    The RPM Fusion repository comes in two flavors, Free and Non-Free. The free repository contains a free version of the software that is open source and non-free, which have mostly almost all free software but are closed source and mainly proprietary.

    In the following tutorial, you will learn how to install RPM Fusion on your CentOS 8 distribution.

  • How to Install Latest Nginx Mainline on CentOS 8 Stream - LinuxCapable

    For those using CentOS 8 Stream, you might have noticed that installing Nginx directly from its Appresteam does not install the latest stable or mainline version. It is pretty far behind where Nginx is stable, and Mainline is at the current time of its development.

    For most, using the default Nginx that comes bundled with the CentOS App stream will be preferred. Still, the following tutorial will cover the steps needed to use newer versions for the latest features.

  • How to Install or Upgrade Nvidia Drivers on CentOS 8 Stream - LinuxCapable

    Most modern Linux Desktop systems come with an Nvidia driver pre-installed in the Nouveau open-source graphics device driver for Nvidia video cards. For the most part, this is acceptable; however, if you are using your Linux system for graphical design or gaming, you may get better drivers.

    Historically, the Nouveau proprietary drivers are slower than Nvidia’s proprietary drivers, along with lacking the newest features, software technology, and support for the latest graphics card hardware. In most situations, upgrading your Nvidia Drivers using the following guide is more beneficial than not doing it. In some cases, you may see some substantial improvements overall.

    In the following guide, you will know how to install Nvidia drivers on your CentOS 8 Stream desktop.

  • How to Use Docker to Safely Try Out Software – CloudSavvy IT

    Docker lets you package up software as self-sufficient containers that share their host’s kernel but look and feel like independent VMs. The software within runs with near-native performance. This makes Docker containers a great way to safely try out new packages without installing them “bare metal” on your machine. Here’s some of the techniques you can use.

  • How to Use an NVIDIA GPU with Docker Containers – CloudSavvy IT

    Docker containers don’t see your system’s GPU automatically. This causes reduced performance in GPU-dependent workloads such as machine learning frameworks. Here’s how to expose your host’s NVIDIA GPU to your containers.

  • How to Use lsmod in Linux (With a Practical Example) – CloudSavvy IT

    Docker containers don’t see your system’s GPU automatically. This causes reduced performance in GPU-dependent workloads such as machine learning frameworks. Here’s how to expose your host’s NVIDIA GPU to your containers.

  • How to find and install software on Linux with Ubuntu - TechRepublic

    Jack Wallen shows you how to install software with the help of Ubuntu Linux and a well-designed app store.

  • How to install HAProxy 2.5 on Ubuntu 20.04 – NextGenTips

    HAProxy is a free, very fast, and reliable reverse proxy offering high availability, load balancing, and proxying for TCP and HTTP-based applications. It is suited for very high-traffic websites and runs the most visited sites.

    What is load balancing?

    Load balancing ensures the availability, uptime, and performance of your servers, websites, and applications during traffic spikes.

    In this tutorial, we are going to learn how to install the latest HAProxy on our Ubuntu 20.04.

  • How to use MirrorMaker 2 with OpenShift Streams for Apache Kafka | Red Hat Developer

    Configure MirrorMaker 2 and Red Hat OpenShift Streams for Apache Kafka to synchronize messages between Kafka clusters deployed on Red Hat OpenShift.

  • 10 lsof Command Examples in Linux [Ed: Older, but updated]

    This is our ongoing series of Linux commands and in this article, we are going to review lsof command with practical examples. lsof meaning ‘LiSt Open Files’ is used to find out which files are open by which process.

    As we all know Linux/Unix considers everything as a file (pipes, sockets, directories, devices, etc). One of the reasons to use the lsof command is when a disk cannot be unmounted as it says the files are being used. With the help of this command, we can easily identify the files which are in use.

More in Tux Machines

digiKam 7.7.0 is released

After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release. Read more

Dilution and Misuse of the "Linux" Brand

Samsung, Red Hat to Work on Linux Drivers for Future Tech

The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world. Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility. Read more

today's howtos

  • How to install go1.19beta on Ubuntu 22.04 – NextGenTips

    In this tutorial, we are going to explore how to install go on Ubuntu 22.04 Golang is an open-source programming language that is easy to learn and use. It is built-in concurrency and has a robust standard library. It is reliable, builds fast, and efficient software that scales fast. Its concurrency mechanisms make it easy to write programs that get the most out of multicore and networked machines, while its novel-type systems enable flexible and modular program constructions. Go compiles quickly to machine code and has the convenience of garbage collection and the power of run-time reflection. In this guide, we are going to learn how to install golang 1.19beta on Ubuntu 22.04. Go 1.19beta1 is not yet released. There is so much work in progress with all the documentation.

  • molecule test: failed to connect to bus in systemd container - openQA bites

    Ansible Molecule is a project to help you test your ansible roles. I’m using molecule for automatically testing the ansible roles of geekoops.

  • How To Install MongoDB on AlmaLinux 9 - idroot

    In this tutorial, we will show you how to install MongoDB on AlmaLinux 9. For those of you who didn’t know, MongoDB is a high-performance, highly scalable document-oriented NoSQL database. Unlike in SQL databases where data is stored in rows and columns inside tables, in MongoDB, data is structured in JSON-like format inside records which are referred to as documents. The open-source attribute of MongoDB as a database software makes it an ideal candidate for almost any database-related project. This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple and assumes you are running in the root account, if not you may need to add ‘sudo‘ to the commands to get root privileges. I will show you the step-by-step installation of the MongoDB NoSQL database on AlmaLinux 9. You can follow the same instructions for CentOS and Rocky Linux.

  • An introduction (and how-to) to Plugin Loader for the Steam Deck. - Invidious
  • Self-host a Ghost Blog With Traefik

    Ghost is a very popular open-source content management system. Started as an alternative to WordPress and it went on to become an alternative to Substack by focusing on membership and newsletter. The creators of Ghost offer managed Pro hosting but it may not fit everyone's budget. Alternatively, you can self-host it on your own cloud servers. On Linux handbook, we already have a guide on deploying Ghost with Docker in a reverse proxy setup. Instead of Ngnix reverse proxy, you can also use another software called Traefik with Docker. It is a popular open-source cloud-native application proxy, API Gateway, Edge-router, and more. I use Traefik to secure my websites using an SSL certificate obtained from Let's Encrypt. Once deployed, Traefik can automatically manage your certificates and their renewals. In this tutorial, I'll share the necessary steps for deploying a Ghost blog with Docker and Traefik.