Open Hardware/Modding Leftovers

-
Robotic waiter learning to serve drinks
-
Raspberry Pi Retrofit heaven
We love a good retrofit project around here, and seeing Raspberry Pi turn an original Super 8 camera into a digital device was a highlight on the blog this week.
A classic Game Boy got the same treatment, hiding a brand new Raspberry Pi brain in its original retro shell.
-
Why the Raspberry Pi isn’t suitable for IoT
Let’s start by praising the Raspberry Pi: it has brought cheap computing to many, has inspired and enabled education and undoubtedly been a huge benefit. I use my own Pi daily, and we have often used its flexibility to perform hardware testing, from accessing UART to reading flash memory. So why do we not recommend developers use it from a security perspective?
It offers a flexible platform – you can develop a solution on a Pi 4, then just move that image straight to a compute module. But this rapid prototyping and development has led some vendors of smart devices to simply embed the Pi in their smart ‘thing’. Again, that’s a good thing as it has reduced hurdles to market entry, right?
-
Arduino Measures 20V Signals Using Quantizer
Canadian electronics geek and nascent YouTuber [Technoyaki] wanted to measure 20 volt signals on his Arduino. One might typically use a voltage divider to knock them down to the 5 volt range of the Arduino’s 10-bit A/Ds. But he isn’t one to take the conventional approach. Instead of using two resistors, [Technoyaki] decides to build an analog circuit out of sixteen resistors, four op amps and a separate 6 VDC supply.
-
Wearable Scope Lets Your Fingers Do The Probing
The scope consists of an nRF5340 evaluation board in a 3D printed mount, with an SPI-connected Adafruit 2.8″ TFT display on top. With a pair of wires run from the board’s ADC and ground pins, [aniketdhole] just needed a bit of code to glue it all together and show some basic signal visualizations on the display. It’s been tested against PWM signals generated by an Arduino and some potentiometer controlled voltages, but anything much wilder than that is probably a bit too much to ask for from this rig in its current configuration.
-

- Login or register to post comments
Printer-friendly version- 1849 reads
PDF version
More in Tux Machines
- Highlights
- Front Page
- Latest Headlines
- Archive
- Recent comments
- All-Time Popular Stories
- Hot Topics
- New Members
digiKam 7.7.0 is released
After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release.
|
Dilution and Misuse of the "Linux" Brand
|
Samsung, Red Hat to Work on Linux Drivers for Future Tech
The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world.
Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility.
|
today's howtos
|








.svg_.png)
Content (where original) is available under CC-BY-SA, copyrighted by original author/s.

Recent comments
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago