Language Selection

English French German Italian Portuguese Spanish

today's howtos

Filed under
HowTos
  • 3 Linux commands you have forgotten about

    Time passes and things change. There is nothing eternal in this world, maybe except taxes but just as people get older and are replaced by younger ones, so Linux commands also get older and are replaced by other “younger”, “more modern” .

    In this article, we’ll look at a few commands that you’ve used a lot before, but you’ve probably forgotten about. People have the ability to forget very quickly and adapt to the new without thinking much about the past.

  • How to install Ubuntu Kylin 21.04

    In this video, I am going to show how to install Ubuntu Kylin 21.04.

  • How to measure the execution time of a command in Linux

    When working on the command line in Linux, you may want to know how much time a particular command has taken (from start to finish).

    If you are new to Linux and looking for a way to do this, you will be pleased to learn that there is a command-line tool that does exactly what you want. The tool in question is called "time". In this guide, I will show you how to use the time command. We will measure how long a Linux command takes to execute.

    Please note that all instructions and examples mentioned here have been tested on Ubuntu 20.04.

  • How to install RubyMine on a Chromebook

    Today we are looking at how to install RubyMine on a Chromebook. Please follow the video/audio guide as a tutorial where we explain the process step by step and use the commands below.

  • How to use FTP or SFTP in Linux command line interface - LinuxTechLab

    FTP or File Transfer Protocol is a network protocol that is used to transfer files to & from a remote location. If you are looking to set up an FTP server, then please go through the tutorials mentioned HERE & HERE.

    In this tutorial, we are going to discuss how to use Linux FTP or SFTP command to manage files and directories FTP server using the command line interface. Though there are many GUI clients available that can be used to manage files but there are many a time when CLI is the best option.

  • How to Install Odoo 11 on CentOS 7 with Nginx as a Reverse Proxy

    In this tutorial, we will guide you through the steps of installing Odoo 11 on CentOS 7. We will also install Nginx and configure it as a reverse proxy. Odoo (formerly OpenERP) is a simple and intuitive suite of open-source enterprise management applications such as Website Builder, eCommerce, CRM, Accounting, Manufacturing, Project and Warehouse Management, Human Resources, Marketing, and many more.

    Odoo comes in two editions, Community edition which is free, and Enterprise edition. In our case, we will install and use the Community edition. Odoo 11 requires Python 3.5 which is not available in the CentOS repositories. That is the reason why we cannot install the Odoo package via yum

  • How to Install ProFTPD with TLS on Ubuntu 20.04 LTS

    Transferring files via FTP (File Transfer Protocol) is probably still one of the most popular ways to upload files to a server. ProFTPD is a popular and versatile FTP server that is available as open-source software and supports TLS (SSL) for secure connections.

    By default, FTP is an insecure protocol as passwords and data are transferred in cleartext. By using TLS, as we do in this guide, all communication can be encrypted, making FTP more secure.

    This article describes how to configure proftpd with TLS on Ubuntu server 20.04 LTS.

  • Linux 101: What is the Linux $PATH? - TechRepublic

    If you're new to Linux, you might have heard mention of something called the PATH. Or, you've seen it written like: $PATH. What is this mysterious convention? Is it less followed or something dark and dangerous you might want to avoid?

    Actually, the Linux PATH is quite simple, in that it consists of all the directories wherein your user can fun commands from anywhere. Let me explain.

    Let's say you write a bash script to print out "Hello, TechRepublic!" and named it hello.sh. You give it executable permissions and leave it in your home directory.

  • How to Create a Sudo User in Ubuntu Linux

    In this tutorial, we will see how to create a new user in Ubuntu 20.04 and how to grant sudo access to the user. As you may aware, any users who want to run commands that require root privileges need to either switch to the root account and submit the command or they should be part of the sudo group.

  • How to Connect a Projector to Your Ubuntu Computer - Make Tech Easier

    There’s nothing quite as fun or as necessary as using a projector. Whether you’re a teacher using a projector in your classroom or setting up an outdoor movie night on the wall of your house, projectors are a great way to turn an average space up to 11. However, for Linux users, there can sometimes be difficulties getting different displays to work, and it may be important to walk through some troubleshooting steps to get things to work. Here we walk you through how to connect a projector to your Ubuntu computer.

  • How To Disable IPv6 on Ubuntu 20.04 LTS - idroot

    In this tutorial, we will show you how to disable IPv6 on Ubuntu 20.04 LTS. For those of you who didn’t know, IPv6 is enabled by default in Ubuntu. But you may want to disable IPv6 for many reasons. Some programs may cause problems when IPv6 is enabled, So if you are not planning to use IPv6, simply disable it and not worry about any potential problems.

    This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple and assumes you are running in the root account, if not you may need to add ‘sudo‘ to the commands to get root privileges. I will show you through the step-by-step disable IPv6 on Ubuntu 20.04 (Focal Fossa). You can follow the same instructions for Ubuntu 18.04, 16.04, and any other Debian-based distribution like Linux Mint.

More in Tux Machines

digiKam 7.7.0 is released

After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release. Read more

Dilution and Misuse of the "Linux" Brand

Samsung, Red Hat to Work on Linux Drivers for Future Tech

The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world. Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility. Read more

today's howtos

  • How to install go1.19beta on Ubuntu 22.04 – NextGenTips

    In this tutorial, we are going to explore how to install go on Ubuntu 22.04 Golang is an open-source programming language that is easy to learn and use. It is built-in concurrency and has a robust standard library. It is reliable, builds fast, and efficient software that scales fast. Its concurrency mechanisms make it easy to write programs that get the most out of multicore and networked machines, while its novel-type systems enable flexible and modular program constructions. Go compiles quickly to machine code and has the convenience of garbage collection and the power of run-time reflection. In this guide, we are going to learn how to install golang 1.19beta on Ubuntu 22.04. Go 1.19beta1 is not yet released. There is so much work in progress with all the documentation.

  • molecule test: failed to connect to bus in systemd container - openQA bites

    Ansible Molecule is a project to help you test your ansible roles. I’m using molecule for automatically testing the ansible roles of geekoops.

  • How To Install MongoDB on AlmaLinux 9 - idroot

    In this tutorial, we will show you how to install MongoDB on AlmaLinux 9. For those of you who didn’t know, MongoDB is a high-performance, highly scalable document-oriented NoSQL database. Unlike in SQL databases where data is stored in rows and columns inside tables, in MongoDB, data is structured in JSON-like format inside records which are referred to as documents. The open-source attribute of MongoDB as a database software makes it an ideal candidate for almost any database-related project. This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple and assumes you are running in the root account, if not you may need to add ‘sudo‘ to the commands to get root privileges. I will show you the step-by-step installation of the MongoDB NoSQL database on AlmaLinux 9. You can follow the same instructions for CentOS and Rocky Linux.

  • An introduction (and how-to) to Plugin Loader for the Steam Deck. - Invidious
  • Self-host a Ghost Blog With Traefik

    Ghost is a very popular open-source content management system. Started as an alternative to WordPress and it went on to become an alternative to Substack by focusing on membership and newsletter. The creators of Ghost offer managed Pro hosting but it may not fit everyone's budget. Alternatively, you can self-host it on your own cloud servers. On Linux handbook, we already have a guide on deploying Ghost with Docker in a reverse proxy setup. Instead of Ngnix reverse proxy, you can also use another software called Traefik with Docker. It is a popular open-source cloud-native application proxy, API Gateway, Edge-router, and more. I use Traefik to secure my websites using an SSL certificate obtained from Let's Encrypt. Once deployed, Traefik can automatically manage your certificates and their renewals. In this tutorial, I'll share the necessary steps for deploying a Ghost blog with Docker and Traefik.