today's howtos

-
How to run the Raspberry Pi Os in a virtual machine with Qemu and Kvm - LinuxConfig.org
Although many operating system are available for the Raspberry Pi, the official one is the Raspberry Pi Os. The operating system is made to run for the arm architecture, and can be easily installed on the SD card which will be used as the main Raspberry Pi storage device. Sometimes we may want to perform some tests or try some applications without having a physical Raspberry Pi machine; in this tutorial we will see how we can create a virtual machine with the Raspberry Pi Os system using Qemu and Kvm (Kernel Virtual Machine).
-
How To Install CyberPanel on Ubuntu 20.04 LTS - idroot
In this tutorial, we will show you how to install CyberPanel on Ubuntu 20.04 LTS. For those of you who didn’t know, CyberPanel is one of the first control panels on the market that is both open sources and uses OpenLiteSpeed web server which also packs Email, DNS, and FTP server.
This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple and assumes you are running in the root account, if not you may need to add ‘sudo‘ to the commands to get root privileges. I will show you through the step-by-step installation of the CyberPanel control panel on Ubuntu 20.04 (Focal Fossa). You can follow the same instructions for Ubuntu 18.04, 16.04, and any other Debian-based distribution like Linux Mint.
-
How to Install Apache on Ubuntu 20.04 and Host Website
Apache is an open source and free web server software developed by the Apache Software Foundation. It is officially called Apache HTTP Server. Apache is one of the oldest, cross-platform web servers and it is beginner-friendly.
In this tutorial, we are going to install Apache version 2 (Apache2) on Ubuntu 20.04. Furthermore, we are going to configure virtual hosts so that more than one website can be hosted on a single server.
-
Source Command in Linux
The source command is a built-in shell command used to read and execute commands from a file inside the current shell session. The source command is commonly used to retain/change the environment variable in the current shell. In short, sourcing a script will run execute commands in the current shell.
-
How to Install and Use Docker on Ubuntu 20.04 / 20.10
Docker is a free and open source tool designed to build, deploy, and run applications inside containers. Host on which docker is installed is known docker engine. To work the docker engine smoothly, docker daemon service must always be running. For the applications where multiple containers are used then with the help of docker compose these containers are spin up as a service.
In this guide, we will demonstrate docker installation on Ubuntu 20.04 /20.10 and will also learn about docker compose installation and its usage.
-
Build a home thermostat with a Raspberry Pi | Opensource.com
My wife and I moved into a new home in October 2020. As soon as it started getting cold, we realized some shortcomings of the home's older heating system (including one heating zone that was always on). We had Nest thermostats in our previous home, and the current setup was not nearly as convenient. There are multiple thermostats in our house, and some had programmed heating schedules, others had different schedules, some had none at all.
[...]
The rest of the "temp" logic is relatively straightforward, but I do want to highlight a piece that I initially missed. My code was running for a few days, and I was working on the hardware, when I noticed that my relays were turning on and off every few seconds. This "short-cycling" isn't necessarily harmful, but it certainly isn't efficient. To avoid that, I added some thresholding to make sure the heat toggles only when it's +/- 0.5C°.
-

- Login or register to post comments
Printer-friendly version- 25868 reads
PDF version
More in Tux Machines
- Highlights
- Front Page
- Latest Headlines
- Archive
- Recent comments
- All-Time Popular Stories
- Hot Topics
- New Members
digiKam 7.7.0 is released
After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release.
|
Dilution and Misuse of the "Linux" Brand
|
Samsung, Red Hat to Work on Linux Drivers for Future Tech
The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world.
Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility.
|
today's howtos
|








.svg_.png)
Content (where original) is available under CC-BY-SA, copyrighted by original author/s.

Recent comments
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago