Language Selection

English French German Italian Portuguese Spanish

FreeBSD 13.0-BETA1 Now Available

Submitted by Roy Schestowitz on Sunday 7th of February 2021 05:32:17 PM Filed under
BSD

The first BETA build of the 13.0-RELEASE release cycle is now available.

Installation images are available for:

o 13.0-BETA1 amd64 GENERIC
o 13.0-BETA1 powerpc64 GENERIC64
o 13.0-BETA1 powerpc64le GENERIC64LE
o 13.0-BETA1 powerpcspe MPC85XXSPE
o 13.0-BETA1 aarch64 GENERIC
o 13.0-BETA1 aarch64 RPI
o 13.0-BETA1 aarch64 PINE64
o 13.0-BETA1 aarch64 PINE64-LTS
o 13.0-BETA1 aarch64 PINEBOOK
o 13.0-BETA1 aarch64 ROCK64
o 13.0-BETA1 aarch64 ROCKPRO64
o 13.0-BETA1 riscv64 GENERIC
o 13.0-BETA1 riscv64 GENERICSD

Note regarding arm SD card images: For convenience for those without
console access to the system, a freebsd user with a password of
freebsd is available by default for ssh(1) access.  Additionally,
the root user password is set to root.  It is strongly recommended
to change the password for both users after gaining access to the
system.

Installer images and memory stick images are available here:

    https://download.freebsd.org/ftp/releases/ISO-IMAGES/13.0/

The image checksums follow at the end of this e-mail.

If you notice problems you can report them through the Bugzilla PR
system or on the -stable mailing list.

If you would like to use Git to do a source based update of an existing
system, use the "releng/13.0" branch.

Please note, the release notes page is not yet complete, and will be
updated on an ongoing basis as the 13.0-RELEASE cycle progresses.

=== Virtual Machine Disk Images ===

VM disk images are available for the amd64, and aarch64
architectures.  Disk images may be downloaded from the following URL
(or any of the FreeBSD download mirrors):

    https://download.freebsd.org/ftp/releases/VM-IMAGES/13.0-BETA1/

The partition layout is:

    ~ 16 kB - freebsd-boot GPT partition type (bootfs GPT label)
    ~ 1 GB  - freebsd-swap GPT partition type (swapfs GPT label)
    ~ 20 GB - freebsd-ufs GPT partition type (rootfs GPT label)

The disk images are available in QCOW2, VHD, VMDK, and raw disk image
formats.  The image download size is approximately 135 MB and 165 MB
respectively (amd64/i386), decompressing to a 21 GB sparse image.

Note regarding arm64/aarch64 virtual machine images: a modified QEMU EFI
loader file is needed for qemu-system-aarch64 to be able to boot the
virtual machine images.  See this page for more information:

    https://wiki.freebsd.org/arm64/QEMU

To boot the VM image, run:

    % qemu-system-aarch64 -m 4096M -cpu cortex-a57 -M virt  \
	-bios QEMU_EFI.fd -serial telnet::4444,server -nographic \
	-drive if=none,file=VMDISK,id=hd0 \
	-device virtio-blk-device,drive=hd0 \
	-device virtio-net-device,netdev=net0 \
	-netdev user,id=net0

Be sure to replace "VMDISK" with the path to the virtual machine image.

BASIC-CI images can be found at:

    https://download.freebsd.org/ftp/releases/CI-IMAGES/13.0-BETA1/

Read more

Also: FreeBSD 13.0-BETA1 Released With WireGuard, Updated ZFS, NUMA Optimizations

»

More in Tux Machines

digiKam 7.7.0 is released

After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release. Read more

Dilution and Misuse of the "Linux" Brand

Samsung, Red Hat to Work on Linux Drivers for Future Tech

The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world. Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility. Read more

today's howtos

  • How to install go1.19beta on Ubuntu 22.04 – NextGenTips

    In this tutorial, we are going to explore how to install go on Ubuntu 22.04 Golang is an open-source programming language that is easy to learn and use. It is built-in concurrency and has a robust standard library. It is reliable, builds fast, and efficient software that scales fast. Its concurrency mechanisms make it easy to write programs that get the most out of multicore and networked machines, while its novel-type systems enable flexible and modular program constructions. Go compiles quickly to machine code and has the convenience of garbage collection and the power of run-time reflection. In this guide, we are going to learn how to install golang 1.19beta on Ubuntu 22.04. Go 1.19beta1 is not yet released. There is so much work in progress with all the documentation.

  • molecule test: failed to connect to bus in systemd container - openQA bites

    Ansible Molecule is a project to help you test your ansible roles. I’m using molecule for automatically testing the ansible roles of geekoops.

  • How To Install MongoDB on AlmaLinux 9 - idroot

    In this tutorial, we will show you how to install MongoDB on AlmaLinux 9. For those of you who didn’t know, MongoDB is a high-performance, highly scalable document-oriented NoSQL database. Unlike in SQL databases where data is stored in rows and columns inside tables, in MongoDB, data is structured in JSON-like format inside records which are referred to as documents. The open-source attribute of MongoDB as a database software makes it an ideal candidate for almost any database-related project. This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple and assumes you are running in the root account, if not you may need to add ‘sudo‘ to the commands to get root privileges. I will show you the step-by-step installation of the MongoDB NoSQL database on AlmaLinux 9. You can follow the same instructions for CentOS and Rocky Linux.

  • An introduction (and how-to) to Plugin Loader for the Steam Deck. - Invidious
  • Self-host a Ghost Blog With Traefik

    Ghost is a very popular open-source content management system. Started as an alternative to WordPress and it went on to become an alternative to Substack by focusing on membership and newsletter. The creators of Ghost offer managed Pro hosting but it may not fit everyone's budget. Alternatively, you can self-host it on your own cloud servers. On Linux handbook, we already have a guide on deploying Ghost with Docker in a reverse proxy setup. Instead of Ngnix reverse proxy, you can also use another software called Traefik with Docker. It is a popular open-source cloud-native application proxy, API Gateway, Edge-router, and more. I use Traefik to secure my websites using an SSL certificate obtained from Let's Encrypt. Once deployed, Traefik can automatically manage your certificates and their renewals. In this tutorial, I'll share the necessary steps for deploying a Ghost blog with Docker and Traefik.

More on Tux Machines: About ● Gallery ● Forum ● Blogs ● Search ● News ● RSS Feed

Part of Bytes Media ● Sister sites below.

TechBytes Techrights button

Powered by Drupal, an open source content management system

Content available under CC-BY-SA CC

© by original authors

Powered by CentOS 6.5 (GNU/Linux), Varnish, and Drupal 6