Language Selection

English French German Italian Portuguese Spanish

Debian and Ubuntu Leftovers

Filed under
Debian
Ubuntu
  • jmtd → log → Borg, confidence in backups, GtkPod and software preservation

    Luckily, other fine folks have worked out reversing all these steps and implemented it in software such as libgpod and its frontend, GtkPod, which is still currently available as a Debian package. It mostly worked, and I got back 95% of the tracks. (It would have been nice if GtkPod had reported the tracks it hadn't recovered, it was aware they existed based on the errors it did print. But you can't have everything.)

    GtkPod is a quirky, erratic piece of software, that is only useful for old Apple equipment that is long out of production, prior to the introduction of the encryption. The upstream homepage is dead, and I suspect it is unmaintained. The Debian package is orphaned. It's been removed from testing, because it won't build with GCC 10. On the other hand, my experience shows that it worked, and was useful for a real problem that someone had today.

    I'm in two minds about GtkPod's fate. On the one hand, I think Debian has far too many packages, with a corresponding burden of maintenance responsibility (for the whole project, not just the individual package maintainers), and there's a quality problem: once upon a time, if software had been packaged in a distribution like Debian, that was a mark of quality, a vote of confidence, and you could have some hope that the software would work and integrate well with the rest of the system. That is no longer true, and hasn't been in my experience for many years. If we were more discerning about what software we included in the distribution, and what we kept, perhaps we could be a leaner distribution, faster to adapt to the changing needs in the world, and of a higher quality.

    On the other hand, this story about GtkPod is just one of many similar stories. Real problems have been solved in open source software, and computing historians, vintage computer enthusiasts, researchers etc. can still benefit from that software long into the future. Throwing out all this stuff in the name of "progress", could be misguided. I'm especially sad when I see the glee which people have expressed when ditching libraries like Qt4 from the archive. Some software will not be ported on to Qt5 (or Gtk3, Qt6, Gtk4, Qt7, etc., in perpetuity). Such software might be all of: unmaintained, "finished", and useful for some purpose (however niche), all at the same time.

  • st, xft and ubuntu 20.04.1

    Some time ago I switched to AwesomeWM and with that came another change, my default terminal emulator. Having used GNOME terminal for years, I soon switched to Terminator back in the day. Leaving GNOME behind, in search for a more lean desktop with less frills and more keyboard centric features, I also had to ditch that terminal emulator (it has too many dependencies for my use case). Eventually I stumbled upon st, which fit the bill.

    st still seems almost perfect for me and I'm sticking with it, for now. There is one annoying bug though, which came to light when I started receiving e-mails with emoticons. Those emoticons crashed my 'st' instance!

    This is actually caused by an upstream Xft bug. When emoticons are displayed, they crash st. I had to resort to using xterm sometimes, which is, well, not a great experience nowadays. I set out on a journey to fix my desktop.

  • Design and Web team summary – 10th November 2020 | Ubuntu

    Hi, my name is Long. I’ve recently joined Canonical on the Web and Design team as a Lead Visual Designer. Joining Canonical during this weird time that we’re all going through has been a strange experience.

    I’m generally a sociable person who likes those impromptu conversations and chance meets in the office, but having to work remotely I haven’t had the opportunity to meet any of them in person. That being said; all the guys have made me feel extremely welcome and everybody’s passion and enthusiasm is infectious.

    My previous experience expands a wide range of sectors, which include Banking, Insurance, Retail, Sports and Media, Healthcare and lots of other fun projects along the way. I’ve been doing design in some form or another for the past 20 years and it never gets old. I’m always awed and fascinated by the design community who are always pushing the boundaries of design.

    Although very cliche, my hobbies include keeping up with design trends, Fashion, Architecture, Product Design and everything else in-between that catches my eye.

    If I’m not scouring the net for inspiration, I’ll be reading stuff about tech or chilling out with a good book (Fantasy, Sci-Fi).

  • Open Operators Training Day hosted by Canonical: a co-located KubeCon event

    KubeCon NA is just around the corner and, as always, we aim to give back to the community in any way we can. That’s why, in the context of the upcoming KubeCon, we’re hosting a full-day training on operators, led by Canonical’s engineers.

More in Tux Machines

digiKam 7.7.0 is released

After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release. Read more

Dilution and Misuse of the "Linux" Brand

Samsung, Red Hat to Work on Linux Drivers for Future Tech

The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world. Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility. Read more

today's howtos

  • How to install go1.19beta on Ubuntu 22.04 – NextGenTips

    In this tutorial, we are going to explore how to install go on Ubuntu 22.04 Golang is an open-source programming language that is easy to learn and use. It is built-in concurrency and has a robust standard library. It is reliable, builds fast, and efficient software that scales fast. Its concurrency mechanisms make it easy to write programs that get the most out of multicore and networked machines, while its novel-type systems enable flexible and modular program constructions. Go compiles quickly to machine code and has the convenience of garbage collection and the power of run-time reflection. In this guide, we are going to learn how to install golang 1.19beta on Ubuntu 22.04. Go 1.19beta1 is not yet released. There is so much work in progress with all the documentation.

  • molecule test: failed to connect to bus in systemd container - openQA bites

    Ansible Molecule is a project to help you test your ansible roles. I’m using molecule for automatically testing the ansible roles of geekoops.

  • How To Install MongoDB on AlmaLinux 9 - idroot

    In this tutorial, we will show you how to install MongoDB on AlmaLinux 9. For those of you who didn’t know, MongoDB is a high-performance, highly scalable document-oriented NoSQL database. Unlike in SQL databases where data is stored in rows and columns inside tables, in MongoDB, data is structured in JSON-like format inside records which are referred to as documents. The open-source attribute of MongoDB as a database software makes it an ideal candidate for almost any database-related project. This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple and assumes you are running in the root account, if not you may need to add ‘sudo‘ to the commands to get root privileges. I will show you the step-by-step installation of the MongoDB NoSQL database on AlmaLinux 9. You can follow the same instructions for CentOS and Rocky Linux.

  • An introduction (and how-to) to Plugin Loader for the Steam Deck. - Invidious
  • Self-host a Ghost Blog With Traefik

    Ghost is a very popular open-source content management system. Started as an alternative to WordPress and it went on to become an alternative to Substack by focusing on membership and newsletter. The creators of Ghost offer managed Pro hosting but it may not fit everyone's budget. Alternatively, you can self-host it on your own cloud servers. On Linux handbook, we already have a guide on deploying Ghost with Docker in a reverse proxy setup. Instead of Ngnix reverse proxy, you can also use another software called Traefik with Docker. It is a popular open-source cloud-native application proxy, API Gateway, Edge-router, and more. I use Traefik to secure my websites using an SSL certificate obtained from Let's Encrypt. Once deployed, Traefik can automatically manage your certificates and their renewals. In this tutorial, I'll share the necessary steps for deploying a Ghost blog with Docker and Traefik.