Language Selection

English French German Italian Portuguese Spanish

today's leftovers

Filed under
Misc
  • Debian KDE/Plasma Status 2020-11-04 | There and back again

    About a month worth of updates on KDE/Plasma in Debian has accumulated, so here we go. The highlights are: Plasma 5.19.5 based on Qt 5.15 is in Debian/experimental and hopefully soon in Debian/unstable, and my own builds at OBS have been updated to Plasma 5.20.2, Frameworks 5.75, Apps 20.08.2.

    [...]

    The packages in Debian/experimental are at the most current state, 5.19.5. We have waited with the upload to unstable until the Qt 5.15 transition is over, but hope to upload to unstable rather soon. After the upload is done, we will work on getting 5.20 into unstable.

    My aim is to get the most recent version of Plasma 5.20 into Debian Bullseye, so we need to do that before the freeze early next year. Let us hope for the best.

  • OpenStack Charms 20.10 – Victoria, OVN, CNTT and more | Ubuntu

    OpenStack Charms 20.10 brings OpenStack Victoria on Ubuntu 20.04 LTS (via Cloud Archive) and Ubuntu 20.10 with full support from Canonical until April 2020. Victoria is the 22nd release of OpenStack which comes with many interesting features of its own, including solutions for complex networking scenarios.

    Neutron now provides its metadata service over IPv6 networks which means that users can access it without a configuration drive in IPv6-only networks. Neutron has also added support for flat networks for Distributed Virtual Routers (DVR), Floating IP port forwarding for the OVN backend, and router availability zones in OVN.

    Octavia load balancer pools now support version two of the PROXY protocol. This allows one to pass client information to member servers when using TCP protocols. PROXYv2 improves the performance of establishing new connections using the PROXY protocol to member servers, especially when the listener is using IPv6.

    In order to upgrade your Charmed OpenStack environment to OpenStack Victoria, refer to the instructions in the official documentation.

    For more information about OpenStack Victoria, refer to the official release notes.

  • Deploying Kubeflow everywhere: desktop, edge, and IoT devices

    Kubeflow, the ML toolkit on K8s, now fits on your desktop and edge devices!

    [...]

    Unfortunately, this notable accomplishment also has a downside. Deploying Kubeflow on your laptop or edge device has become impractical.

    The very minimum memory necessary to deploy the full Kubeflow bundle is 12Gb of RAM.

    On top of that, it is Linux-based. This means that on Windows and macOS you need to allocate 12+ Gb of memory to a Linux VM.

    Last time I tried, my 16Gb of RAM MacBook Pro did not like the idea.

  • Ubuntu 20.10: What’s new?
  • Google fixes two Chrome zero-days, offers little detail about flaws

    Two zero-day bugs in Google's Chrome browser, both of which were being exploited in the wild, have been fixed, according to the company's Project Zero technical lead Ben Hawkes.

  • Skim: Makes The Best Fuzzy Finder Even Better - YouTube

    Today we're checking out a reimplementation of fzf fuzzy finder that you're probably familiar with and unsurprisingly written in Rust called skim, and it's not just a simple write it in rust to make it faster, actually adds in some really interesting and useful features.

  •   

  • mintCast 347 – For the Halibut – mintCast

    First up, in our Wanderings, I pop a kernel, Bo gets refreshed, Josh keeps his chameleon alive, Tony Hughes becomes a hermit, Moss bites into another distro, Joe gets it HANDled, and Tony Watts does the upgrade dance

    Then, in our news, Linux Mint gives us an update, Ubuntu and Fedora both get released, XDA has a phone now, and Microsoft Edges into the Linux browser market

    In security, Chromium blocks annoyances and fixes a font rendering flaw, and WordPress fixes some bad ones

  •  

  • Most Reliable Hosting Company Sites in October 2020 [Ed: One to nine all GNU/Linux]

    Bigstep had the most reliable hosting company site in October 2020. Both Bigstep and Hosting Plus responded to all of Netcraft's requests in October, but a faster average connection time gives Bigstep the edge. Bigstep offers "bare metal" cloud hosting to provide the flexibility of cloud hosting without the associated overhead and performance reductions of virtualization, and has now appeared in the top 10 for four consecutive months.

    Second place goes to Hosting Plus. The Chile-based hosting provider offers domain registration and SSL certificates, with VPS and dedicated server options for hosting, and hosting plans designed specifically for WordPress and ecommerce sites. This is the second time that Hosting Plus has appeared in the top 10.

    Choopa.com appears in third place, with a single failed request and the fastest average connection time on the table for October. Choopa.com offers cloud hosting, dedicated hosting and colocation in its own primary facility in Piscataway, New Jersey as well as smaller facilities in Los Angeles, Amsterdam, and Tokyo.

More in Tux Machines

digiKam 7.7.0 is released

After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release. Read more

Dilution and Misuse of the "Linux" Brand

Samsung, Red Hat to Work on Linux Drivers for Future Tech

The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world. Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility. Read more

today's howtos

  • How to install go1.19beta on Ubuntu 22.04 – NextGenTips

    In this tutorial, we are going to explore how to install go on Ubuntu 22.04 Golang is an open-source programming language that is easy to learn and use. It is built-in concurrency and has a robust standard library. It is reliable, builds fast, and efficient software that scales fast. Its concurrency mechanisms make it easy to write programs that get the most out of multicore and networked machines, while its novel-type systems enable flexible and modular program constructions. Go compiles quickly to machine code and has the convenience of garbage collection and the power of run-time reflection. In this guide, we are going to learn how to install golang 1.19beta on Ubuntu 22.04. Go 1.19beta1 is not yet released. There is so much work in progress with all the documentation.

  • molecule test: failed to connect to bus in systemd container - openQA bites

    Ansible Molecule is a project to help you test your ansible roles. I’m using molecule for automatically testing the ansible roles of geekoops.

  • How To Install MongoDB on AlmaLinux 9 - idroot

    In this tutorial, we will show you how to install MongoDB on AlmaLinux 9. For those of you who didn’t know, MongoDB is a high-performance, highly scalable document-oriented NoSQL database. Unlike in SQL databases where data is stored in rows and columns inside tables, in MongoDB, data is structured in JSON-like format inside records which are referred to as documents. The open-source attribute of MongoDB as a database software makes it an ideal candidate for almost any database-related project. This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple and assumes you are running in the root account, if not you may need to add ‘sudo‘ to the commands to get root privileges. I will show you the step-by-step installation of the MongoDB NoSQL database on AlmaLinux 9. You can follow the same instructions for CentOS and Rocky Linux.

  • An introduction (and how-to) to Plugin Loader for the Steam Deck. - Invidious
  • Self-host a Ghost Blog With Traefik

    Ghost is a very popular open-source content management system. Started as an alternative to WordPress and it went on to become an alternative to Substack by focusing on membership and newsletter. The creators of Ghost offer managed Pro hosting but it may not fit everyone's budget. Alternatively, you can self-host it on your own cloud servers. On Linux handbook, we already have a guide on deploying Ghost with Docker in a reverse proxy setup. Instead of Ngnix reverse proxy, you can also use another software called Traefik with Docker. It is a popular open-source cloud-native application proxy, API Gateway, Edge-router, and more. I use Traefik to secure my websites using an SSL certificate obtained from Let's Encrypt. Once deployed, Traefik can automatically manage your certificates and their renewals. In this tutorial, I'll share the necessary steps for deploying a Ghost blog with Docker and Traefik.