Language Selection

English French German Italian Portuguese Spanish

Open Hardware: Turing Pi 2, Raspberry Pi, and Arduino

Filed under
Hardware
  • Turing Pi 2 mini-ITX cluster board takes four Raspberry Pi Compute Modules 4

    Can you remember Turing Pi mini-ITX cluster board taking up to 7 Raspberry Pi Compute Modules launched last year? Honestly, I had forgotten about it until I was asked this morning is Gumstix CM4 to CM3 adapter could be used to replace Compute Modules 3 with Compute Modules 4 in the cluster board. When I went to Turing Pi website to have a look at the board, I discovered the company had made an announcement about Turing Pi 2 cluster board specifically designed to take up to four Raspberry Pi CM4 modules.

  • Raspberry Pi CM3+ based DIN-railer features isolated I/O module

    STV Electronic has launched an “I/O Module 16” extension for its Raspberry Pi CM3+ based “Smart Manager 4.0” DIN rail PC featuring configurable, isolated DIO. Up to 8x modules with 128 I/Os can be controlled from a single system.

    We missed the Embedded World announcement in early March from German embedded vendor STV Electronic, introducing a Smart Manager 4.0 DIN-rail computer based on the Raspberry Pi Compute Module 3+. This week, the company announced an IO Module 16 add-on for the system, which is designed for industrial control and building automation.

  • Arduino Blog » Gigantic pumpkin dispenses candy at the push of a button

    YouTuber Brankly is going to be giving out candy in style this Halloween. Or, more accurately, his automated pumpkin system is going to take care of the task for him.

    His large fake jack-o’-lantern sits atop a hilariously smaller skeleton body, and hides inside a servo-driven turntable dispensing mechanism. As it rotates, treats are pushed out of a tongue-like slide mechanism, where it’s detected by two infrared sensors. This detection stops (and reverses) the dispensing plate, while the bowl in front illuminates.

  • Arduino Blog » Minimal metal detector made with an Arduino and a coil of wire

    For an easy DIY metal detector setup, look no further than this project by creator “rgco.” 

    The handheld device uses a 20-60 turn coil of 26AWG enameled wire, connected across an Arduino Uno or Nano’s pins 8 and 10. A series of pulses is continuously sent out by pin 10, which are delayed in reaching pin 8 according to the inductance across the coil. As this coil approaches other metallic objects, the effective inductance changes, thus varying the delay in the signal reaching pin 10.

    This effect is sensed by the Arduino, outputting chirps on a buzzer as audio feedback when metal is nearby. To convert it into a practical device, the Nano configuration is stuffed into a Tic Tac container, with the coil held at a distance with two skewer sticks.

More in Tux Machines

digiKam 7.7.0 is released

After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release. Read more

Dilution and Misuse of the "Linux" Brand

Samsung, Red Hat to Work on Linux Drivers for Future Tech

The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world. Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility. Read more

today's howtos

  • How to install go1.19beta on Ubuntu 22.04 – NextGenTips

    In this tutorial, we are going to explore how to install go on Ubuntu 22.04 Golang is an open-source programming language that is easy to learn and use. It is built-in concurrency and has a robust standard library. It is reliable, builds fast, and efficient software that scales fast. Its concurrency mechanisms make it easy to write programs that get the most out of multicore and networked machines, while its novel-type systems enable flexible and modular program constructions. Go compiles quickly to machine code and has the convenience of garbage collection and the power of run-time reflection. In this guide, we are going to learn how to install golang 1.19beta on Ubuntu 22.04. Go 1.19beta1 is not yet released. There is so much work in progress with all the documentation.

  • molecule test: failed to connect to bus in systemd container - openQA bites

    Ansible Molecule is a project to help you test your ansible roles. I’m using molecule for automatically testing the ansible roles of geekoops.

  • How To Install MongoDB on AlmaLinux 9 - idroot

    In this tutorial, we will show you how to install MongoDB on AlmaLinux 9. For those of you who didn’t know, MongoDB is a high-performance, highly scalable document-oriented NoSQL database. Unlike in SQL databases where data is stored in rows and columns inside tables, in MongoDB, data is structured in JSON-like format inside records which are referred to as documents. The open-source attribute of MongoDB as a database software makes it an ideal candidate for almost any database-related project. This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple and assumes you are running in the root account, if not you may need to add ‘sudo‘ to the commands to get root privileges. I will show you the step-by-step installation of the MongoDB NoSQL database on AlmaLinux 9. You can follow the same instructions for CentOS and Rocky Linux.

  • An introduction (and how-to) to Plugin Loader for the Steam Deck. - Invidious
  • Self-host a Ghost Blog With Traefik

    Ghost is a very popular open-source content management system. Started as an alternative to WordPress and it went on to become an alternative to Substack by focusing on membership and newsletter. The creators of Ghost offer managed Pro hosting but it may not fit everyone's budget. Alternatively, you can self-host it on your own cloud servers. On Linux handbook, we already have a guide on deploying Ghost with Docker in a reverse proxy setup. Instead of Ngnix reverse proxy, you can also use another software called Traefik with Docker. It is a popular open-source cloud-native application proxy, API Gateway, Edge-router, and more. I use Traefik to secure my websites using an SSL certificate obtained from Let's Encrypt. Once deployed, Traefik can automatically manage your certificates and their renewals. In this tutorial, I'll share the necessary steps for deploying a Ghost blog with Docker and Traefik.