Language Selection

English French German Italian Portuguese Spanish

GNU/Linux-Compatible Devices and Open Hardware

Filed under
GNU
Linux
Hardware
  • Microchip SAMD21 Machine Learning Evaluation Kits Work with Cartesiam, Edge Impulse and Motion Gestures Solutions

    While it all started in the cloud Artificial Intelligence is now moving at the very edge is ultra-low power nodes, and Microchip has launched two SAMD21 Arm Cortex-M0+ machine learning evaluation kits that now work with AI/ML solutions from Cartesiam, Edge Impulse, and Motion Gestures.

    Bot machine learning evaluation kits come with SAMD21G18 Arm Cortex-M0+ 32-bit MCU, an on-board debugger (nEDBG), an ATECC608A CryptoAuthentication secure element, ATWINC1510 Wi-Fi network controller, as well as Microchip MCP9808 high accuracy temperature sensor and a light sensor. But EV45Y33A development kit is equipped with an add-on board featuring Bosch’s BMI160 low-power Inertial Measurement Unit (IMU), while EV18H79A features an add-on board with TDK InvenSense ICM-42688-P 6-axis MEMS.

  • 3µA/MHz Ambiq Apollo 4 MCU Targets Battery-powered IoT Devices with Voice Processing

    Ambiq Micro is using sub-threshold voltages under 0.5V to offer ultra-low-power Arm microcontrollers. In 2015, the company launch the Apollo Cortex-M4F MCU with 30µA/MHz power consumption in active mode, which was followed in 2016 by Apollo 2 in consuming just 10µA/MHz, and Apollo 3 (Blue) dropped power consumption to as low as 6µA/MHz against using a Cortex-M4F @ 48 MHz in active mode.

  • SBC and HMI starter kit run Linux on i.MX6 ULL

    Artila’s “SBC-7530” runs Linux 5.4 on an i.MX6 ULL with WiFi, 2x 10/100 LAN, 3x USB, 2x RS-485, 2x CAN, mini-PCIe with micro-SIM, and an optional starter kit with 7-inch touchscreen.

    Taiwan-based Artila Electronics, which is known for its Matrix line of low-power, compact IoT gateways, has launched its first SBC in 12 years. The i.MX6 ULL-equipped SBC-7530 follows its circa-2008 M-508 SBC, which is based on an ARM9-based Atmel (now Microchip) AT91RM9200.

  • Industrial panel PC is an IP69 neat freak

    Adlink’s IP69-protected “Titan-AL” panel PC runs Linux or Win 10 on Apollo Lake and is available with 15.6-, 21.5-, and 23.8-inch HD capacitive touchscreens in either VESA with M12 or pipe-mount configurations.

    Adlink has added an Intel Apollo Lake based panel PC to its Titan Panel Computer series that adheres to IP69 water and dust-proofing protections. The Titan-AL follows Adlink’s similarly IP69-protected Penta Food-C15/C17/C19 IP69K, which is aimed specifically at food processing operations and runs on an older Atom D2550. Other IP69 protected panel PCs include TechNexion’s i.MX6 based, 10.1-inch TWP-1010-IMX6 and Wincomm’s Skylake-based, 15-, 19-, and 22-inch WTP-9E66.

  • Compact module runs on Ryzen V1000

    Axiomtek’s Linux-ready “CEM130” COM Express Compact Type 6 module provides a Ryzen Embedded V1000 SoC with up to 32GB DDR4 and support for quad displays, 2x SATA, 7x PCIe, 9x USB, and -20 to 60°C operation.

    Axiomtek, which has previously tapped AMD’s Ryzen Embedded V1000 SoC in a 3.5-inch CAPA13R SBC and DSP600-211 signage player, has now returned with a COM Express Compact Type 6 module. The CEM130 joins other V1000-equipped, 95 x 95mm Compact Type 6 modules such as Arbor’s EmETXe-a10M0 and Kontron’s COMe-cVR6.

  • New COM Express Type 6 Compact Module Compatible with Windows 10 and Linux Operating Systems
  •        

  • Monitor water quality anywhere in the world with WaterAid

    Clean water is one of our most precious resources, but identifying sources of pollution often means expensive equipment. This can also mean taking multiple water quality readings and somehow aggregating them together to be easily usable. As a solution to both problems, Andrei Florian has developed WaterAid — which was recently named a finalist in this year’s Hackaday Prize.

    WaterAid consists of a measurement unit that senses water pH, turbidity, and temperature, as well as atmospheric temperature and humidity. Data is relayed to the system’s backend via a cellular connection, using an onboard MKR GSM 1400. Collected information from one or more devices is then displayed on a Soracom Lagoon dashboard for water monitoring from anywhere in the world!

    Not only can a fleet of WaterAids be used to continuously track a river, lake, or any other body of water, but individuals looking to get immediate feedback on quality can utilize the portable tool’s NeoPixel ring for color-coded judgement.

  •        

  • A MKR ZERO-based volume controller for your PC

    While some keyboards provide media keys or even knobs to adjust your overall computer sound up and down, often what you really want is the ability to tune program volumes separately. To make this extremely easy, SNR Tech Bytes has come up with a beautifully-designed controller, which runs on the MKR ZERO.

    The device features five encoders to individually tune the master volume, Discord, Chrome, gaming, and Spotify, with the help of software on the PC itself. Encoder button mutes each channel as needed, using NeoPixels below to indicate each status.

  •                

  • How is computing taught in schools around the world?

             

  •      

  • Build an arcade cabinet | Hackspace 35

             

  •      

  •  
    nut – testing shutdown and startup

                     

                       

    Based on this, I’m confident the rack will properly shutdown when the power fails. Just as important, it will come back when the power returns.

More in Tux Machines

digiKam 7.7.0 is released

After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release. Read more

Dilution and Misuse of the "Linux" Brand

Samsung, Red Hat to Work on Linux Drivers for Future Tech

The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world. Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility. Read more

today's howtos

  • How to install go1.19beta on Ubuntu 22.04 – NextGenTips

    In this tutorial, we are going to explore how to install go on Ubuntu 22.04 Golang is an open-source programming language that is easy to learn and use. It is built-in concurrency and has a robust standard library. It is reliable, builds fast, and efficient software that scales fast. Its concurrency mechanisms make it easy to write programs that get the most out of multicore and networked machines, while its novel-type systems enable flexible and modular program constructions. Go compiles quickly to machine code and has the convenience of garbage collection and the power of run-time reflection. In this guide, we are going to learn how to install golang 1.19beta on Ubuntu 22.04. Go 1.19beta1 is not yet released. There is so much work in progress with all the documentation.

  • molecule test: failed to connect to bus in systemd container - openQA bites

    Ansible Molecule is a project to help you test your ansible roles. I’m using molecule for automatically testing the ansible roles of geekoops.

  • How To Install MongoDB on AlmaLinux 9 - idroot

    In this tutorial, we will show you how to install MongoDB on AlmaLinux 9. For those of you who didn’t know, MongoDB is a high-performance, highly scalable document-oriented NoSQL database. Unlike in SQL databases where data is stored in rows and columns inside tables, in MongoDB, data is structured in JSON-like format inside records which are referred to as documents. The open-source attribute of MongoDB as a database software makes it an ideal candidate for almost any database-related project. This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple and assumes you are running in the root account, if not you may need to add ‘sudo‘ to the commands to get root privileges. I will show you the step-by-step installation of the MongoDB NoSQL database on AlmaLinux 9. You can follow the same instructions for CentOS and Rocky Linux.

  • An introduction (and how-to) to Plugin Loader for the Steam Deck. - Invidious
  • Self-host a Ghost Blog With Traefik

    Ghost is a very popular open-source content management system. Started as an alternative to WordPress and it went on to become an alternative to Substack by focusing on membership and newsletter. The creators of Ghost offer managed Pro hosting but it may not fit everyone's budget. Alternatively, you can self-host it on your own cloud servers. On Linux handbook, we already have a guide on deploying Ghost with Docker in a reverse proxy setup. Instead of Ngnix reverse proxy, you can also use another software called Traefik with Docker. It is a popular open-source cloud-native application proxy, API Gateway, Edge-router, and more. I use Traefik to secure my websites using an SSL certificate obtained from Let's Encrypt. Once deployed, Traefik can automatically manage your certificates and their renewals. In this tutorial, I'll share the necessary steps for deploying a Ghost blog with Docker and Traefik.