Language Selection

English French German Italian Portuguese Spanish

Programming and Security Patches

Filed under
Development
Security
  • A little hidden gem: QStringIterator

    The code above is broken.

    It falls into the same trap of endless other similar code: it doesn’t take into account that QString does not contain characters/code points, but rather UTF-16 code units.

    All operations on a QString (getting the length, splitting, iterating, etc.) always work in terms of UTF-16 code units, not code points. The reality is: QString is Unicode-aware only in some of its algorithms; certainly not in its storage.

    For instance, if a string contains simply the character “A” — that is, MATHEMATICAL BOLD CAPITAL A (U+1D400) — then its QString storage would actually contain 2 “characters” reported by size() (again, really, not characters in the sense of code points but two UTF-16 code units): 0xD835 and 0xDC00.

    The naïve iteration done above would then check whether those two code units are uppercase, and guess what, they’re not; and therefore conclude that the string is not uppercase, while instead it is. (Those two code units are “special” and used to encode a character outside the BMP; they’re called a surrogate pair. When taken alone, they’re invalid.)

  • How to get started with test-driven development

    I am often approached by software developers who are on board with the switch to test-driven development (TDD). They understand that describing expectations first and then writing code to meet those expectations is the best way to write software. And they agree that writing tests first does not introduce any overhead since they must write tests anyway. Still, they find themselves stuck, not being clear on what to test, when to test it, and how to test it. This article will answer those questions.

    [...]

    One way to the test custom-made car battery would be to hire a testing crew, ship the car with the battery to Portland, and then get the testing crew to drive the car from Portland to Seattle. If the car arrives in Seattle, you can confirm that, yes, the car battery functions as expected.

    Another way to test the custom-made car battery would be to install it in the car and see if the engine turns over. If the engine starts, you can confirm that, yes, the car battery functions as expected.

    Still another way would be to use a voltmeter and connect the positive (+) and the negative (-) terminals to see if the voltmeter registers voltage output in the range of 12.6 to 14.7 volts. If it does, you can confirm that, yes, the car battery functions as expected.

  • Perl Weekly Challenge 44: Only 100, Please, and Make it $200

    These are some answers to the Week 44 of the Perl Weekly Challenge organized by Mohammad S. Anwar.

    [...]

    For solving this task, we first use a recursive combine subroutine that generates all possible strings by inserting between the digits of the “123456789” string the + plus addition, the - subtraction operator, or the '' empty string (i.e. no operator). We then use the evaluate subroutine with each string to perform the various arithmetic operations and compute whether the total is 100.

    [...]

    You have only $1 left at the start of the week. You have been given an opportunity to make it $200. The rule is simple with every move you can either double what you have or add another $1. Write a script to help you get $200 with the smallest number of moves.

    Obviously, doubling your asset is a faster way to go high values than just adding 1. But, if you only double your asset, you get powers of 2, leading you to 128, and then you have to go all the way from 128 to 200, which is most probably not the fastest way to get to 200. In fact, if you first go to three (for example by adding 1 twice), then multiplying by 2 six times, you get to 192, which is much closer to 200. That’s 16 moves, which seems not bad at all. But there may be a yet faster way, let’s see.

  • Wine Debugger Improvements Are On The Way, Start Of LLVM LLDB Support

    With Wine 5.0 having released and the Git tree back open for feature work, we're quite looking forward to see what new material will land following this feature freeze that was in effect the past two months.

    One of the new patch series out by CodeWeavers' Rémi Bernon is improving Winedbg, the Wine debugger. Winedbg is used for debugging Windows applications and among its many debug capabilities is a proxy mode for interacting with the GNU Debugger (GDB). It's that GDB integration that is being improved upon while also starting to support LLVM's Debugger (LLDB).

  • Security updates for Monday

    Security updates have been issued by Debian (jsoup and slirp), Fedora (community-mysql, elog, fontforge, libuv, libvpx, mingw-podofo, nodejs, opensc, podofo, thunderbird-enigmail, transfig, and xfig), openSUSE (arc, libssh, and libvpx), Red Hat (git, java-1.8.0-openjdk, java-11-openjdk, python-reportlab, and sqlite), Slackware (thunderbird), and SUSE (java-1_8_0-openjdk, python, and samba). 

More in Tux Machines

digiKam 7.7.0 is released

After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release. Read more

Dilution and Misuse of the "Linux" Brand

Samsung, Red Hat to Work on Linux Drivers for Future Tech

The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world. Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility. Read more

today's howtos

  • How to install go1.19beta on Ubuntu 22.04 – NextGenTips

    In this tutorial, we are going to explore how to install go on Ubuntu 22.04 Golang is an open-source programming language that is easy to learn and use. It is built-in concurrency and has a robust standard library. It is reliable, builds fast, and efficient software that scales fast. Its concurrency mechanisms make it easy to write programs that get the most out of multicore and networked machines, while its novel-type systems enable flexible and modular program constructions. Go compiles quickly to machine code and has the convenience of garbage collection and the power of run-time reflection. In this guide, we are going to learn how to install golang 1.19beta on Ubuntu 22.04. Go 1.19beta1 is not yet released. There is so much work in progress with all the documentation.

  • molecule test: failed to connect to bus in systemd container - openQA bites

    Ansible Molecule is a project to help you test your ansible roles. I’m using molecule for automatically testing the ansible roles of geekoops.

  • How To Install MongoDB on AlmaLinux 9 - idroot

    In this tutorial, we will show you how to install MongoDB on AlmaLinux 9. For those of you who didn’t know, MongoDB is a high-performance, highly scalable document-oriented NoSQL database. Unlike in SQL databases where data is stored in rows and columns inside tables, in MongoDB, data is structured in JSON-like format inside records which are referred to as documents. The open-source attribute of MongoDB as a database software makes it an ideal candidate for almost any database-related project. This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple and assumes you are running in the root account, if not you may need to add ‘sudo‘ to the commands to get root privileges. I will show you the step-by-step installation of the MongoDB NoSQL database on AlmaLinux 9. You can follow the same instructions for CentOS and Rocky Linux.

  • An introduction (and how-to) to Plugin Loader for the Steam Deck. - Invidious
  • Self-host a Ghost Blog With Traefik

    Ghost is a very popular open-source content management system. Started as an alternative to WordPress and it went on to become an alternative to Substack by focusing on membership and newsletter. The creators of Ghost offer managed Pro hosting but it may not fit everyone's budget. Alternatively, you can self-host it on your own cloud servers. On Linux handbook, we already have a guide on deploying Ghost with Docker in a reverse proxy setup. Instead of Ngnix reverse proxy, you can also use another software called Traefik with Docker. It is a popular open-source cloud-native application proxy, API Gateway, Edge-router, and more. I use Traefik to secure my websites using an SSL certificate obtained from Let's Encrypt. Once deployed, Traefik can automatically manage your certificates and their renewals. In this tutorial, I'll share the necessary steps for deploying a Ghost blog with Docker and Traefik.