Language Selection

English French German Italian Portuguese Spanish

Kernel: Linux 5.3, DragonFlyBSD Takes Linux Bits, LWN Paywall Expires for Recent Articles

Filed under
Linux
  • Ceph updates for 5.3-rc1
    Hi Linus,
    
    The following changes since commit 0ecfebd2b52404ae0c54a878c872bb93363ada36:
    
    Linux 5.2 (2019-07-07 15:41:56 -0700)
    
    are available in the Git repository at:
    
    https://github.com/ceph/ceph-client.git tags/ceph-for-5.3-rc1
    
    for you to fetch changes up to d31d07b97a5e76f41e00eb81dcca740e84aa7782:
    
    ceph: fix end offset in truncate_inode_pages_range call (2019-07-08 14:01:45 +0200)
    
    There is a trivial conflict caused by commit 9ffbe8ac05db
    ("locking/lockdep: Rename lockdep_assert_held_exclusive() ->
    lockdep_assert_held_write()"). I included the resolution in
    for-linus-merged.
    
  • Ceph Sees "Lots Of Exciting Things" For Linux 5.3 Kernel

    Ceph for Linux 5.3 is bringing an addition to speed-up reads/discards/snap-diffs on sparse images, snapshot creation time is now exposed to support features like "restore previous versions", support for security xattrs (currently limited to SELinux), addressing a missing feature bit so the kernel client's Ceph features are now "luminous", better consistency with Ceph FUSE, and changing the time granularity from 1us to 1ns. There are also bug fixes and other work as part of the Ceph code for Linux 5.3. As maintainer Ilya Dryomov put it, "Lots of exciting things this time!"

  • The NVMe Patches To Support Linux On Newer Apple Macs Are Under Review

    At the start of the month we reported on out-of-tree kernel work to support Linux on the newer Macs. Those patches were focused on supporting Apple's NVMe drive behavior by the Linux kernel driver. That work has been evolving nicely and is now under review on the kernel mailing list.

    Volleyed on Tuesday were a set of three patches to the Linux kernel's NVMe code for dealing with the Apple hardware of the past few years in order for Linux to deal with these drives.

    On Apple 2018 systems and newer, their I/O queue sizing/handling is odd and in other areas not properly following NVMe specifications. These patches take care of that while hopefully not regressing existing NVMe controller support.

  • DragonFlyBSD Pulls In The Radeon Driver Code From Linux 4.4

    While the Linux 4.4 kernel is quite old (January 2016), DragonFlyBSD has now re-based its AMD Radeon kernel graphics driver against that release. It is at least a big improvement compared to its Radeon code having been derived previously from Linux 3.19.

    DragonFlyBSD developer François Tigeot continues doing a good job herding the open-source Linux graphics driver support to this BSD. With the code that landed on Monday, DragonFlyBSD's Radeon DRM is based upon the state found in the Linux 4.4.180 LTS tree.

  • Destaging ION

    The Android system has shipped a couple of allocators for DMA buffers over the years; first came PMEM, then its replacement ION. The ION allocator has been in use since around 2012, but it remains stuck in the kernel's staging tree. The work to add ION to the mainline started in 2013; at that time, the allocator had multiple issues that made inclusion impossible. Recently, John Stultz posted a patch set introducing DMA-BUF heaps, an evolution of ION, that is designed to do exactly that — get the Android DMA-buffer allocator to the mainline Linux kernel.

    Applications interacting with devices often require a memory buffer that is shared with the device driver. Ideally, it would be memory mapped and physically contiguous, allowing direct DMA access and minimal overhead when accessing the data from both sides at the same time. ION's main goal is to support that use case; it implements a unified way of defining and sharing such memory buffers, while taking into account the constraints imposed by the devices and the platform.

  • clone3(), fchmodat4(), and fsinfo()

    The kernel development community continues to propose new system calls at a high rate. Three ideas that are currently in circulation on the mailing lists are clone3(), fchmodat4(), and fsinfo(). In some cases, developers are just trying to make more flag bits available, but there is also some significant new functionality being discussed.
    clone3()

    The clone() system call creates a new process or thread; it is the actual machinery behind fork(). Unlike fork(), clone() accepts a flags argument to modify how it operates. Over time, quite a few flags have been added; most of these control what resources and namespaces are to be shared with the new child process. In fact, so many flags have been added that, when CLONE_PIDFD was merged for 5.2, the last available flag bit was taken. That puts an end to the extensibility of clone().

  • Soft CPU affinity

    On NUMA systems with a lot of CPUs, it is common to assign parts of the workload to different subsets of the available processors. This partitioning can improve performance while reducing the ability of jobs to interfere with each other. The partitioning mechanisms available on current kernels might just do too good a job in some situations, though, leaving some CPUs idle while others are overutilized. The soft affinity patch set from Subhra Mazumdar is an attempt to improve performance by making that partitioning more porous.
    In current kernels, a process can be restricted to a specific set of CPUs with either the sched_setaffinity() system call or the cpuset mechanism. Either way, any process so restricted will only be able to run on the specified CPUs regardless of the state of the system as a whole. Even if the other CPUs in the system are idle, they will be unavailable to any process that has been restricted not to run on them. That is normally the behavior that is wanted; a system administrator who has partitioned a system in this way probably has some other use in mind for those CPUs.

    But what if the administrator would rather relax the partitioning in cases where the fenced-off CPUs are idle and going to waste? The only alternative currently is to not partition the system at all and let processes roam across all CPUs. One problem with that approach, beyond losing the isolation between jobs, is that NUMA locality can be lost, resulting in reduced performance even with more CPUs available. In theory the AutoNUMA balancing code in the kernel should address that problem by migrating processes and their memory to the same node, but Mazumdar notes that it doesn't seem to work properly when memory is spread out across the system. Its reaction time is also said to be too slow, and the cost of the page scanning required is high.

More in Tux Machines

digiKam 7.7.0 is released

After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release. Read more

Dilution and Misuse of the "Linux" Brand

Samsung, Red Hat to Work on Linux Drivers for Future Tech

The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world. Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility. Read more

today's howtos

  • How to install go1.19beta on Ubuntu 22.04 – NextGenTips

    In this tutorial, we are going to explore how to install go on Ubuntu 22.04 Golang is an open-source programming language that is easy to learn and use. It is built-in concurrency and has a robust standard library. It is reliable, builds fast, and efficient software that scales fast. Its concurrency mechanisms make it easy to write programs that get the most out of multicore and networked machines, while its novel-type systems enable flexible and modular program constructions. Go compiles quickly to machine code and has the convenience of garbage collection and the power of run-time reflection. In this guide, we are going to learn how to install golang 1.19beta on Ubuntu 22.04. Go 1.19beta1 is not yet released. There is so much work in progress with all the documentation.

  • molecule test: failed to connect to bus in systemd container - openQA bites

    Ansible Molecule is a project to help you test your ansible roles. I’m using molecule for automatically testing the ansible roles of geekoops.

  • How To Install MongoDB on AlmaLinux 9 - idroot

    In this tutorial, we will show you how to install MongoDB on AlmaLinux 9. For those of you who didn’t know, MongoDB is a high-performance, highly scalable document-oriented NoSQL database. Unlike in SQL databases where data is stored in rows and columns inside tables, in MongoDB, data is structured in JSON-like format inside records which are referred to as documents. The open-source attribute of MongoDB as a database software makes it an ideal candidate for almost any database-related project. This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple and assumes you are running in the root account, if not you may need to add ‘sudo‘ to the commands to get root privileges. I will show you the step-by-step installation of the MongoDB NoSQL database on AlmaLinux 9. You can follow the same instructions for CentOS and Rocky Linux.

  • An introduction (and how-to) to Plugin Loader for the Steam Deck. - Invidious
  • Self-host a Ghost Blog With Traefik

    Ghost is a very popular open-source content management system. Started as an alternative to WordPress and it went on to become an alternative to Substack by focusing on membership and newsletter. The creators of Ghost offer managed Pro hosting but it may not fit everyone's budget. Alternatively, you can self-host it on your own cloud servers. On Linux handbook, we already have a guide on deploying Ghost with Docker in a reverse proxy setup. Instead of Ngnix reverse proxy, you can also use another software called Traefik with Docker. It is a popular open-source cloud-native application proxy, API Gateway, Edge-router, and more. I use Traefik to secure my websites using an SSL certificate obtained from Let's Encrypt. Once deployed, Traefik can automatically manage your certificates and their renewals. In this tutorial, I'll share the necessary steps for deploying a Ghost blog with Docker and Traefik.