Language Selection

English French German Italian Portuguese Spanish

FreeBSD 11.3-RC2 Now Available

Filed under
BSD

The second RC build of the 11.3-RELEASE release cycle is now available.

Installation images are available for:

o 11.3-RC2 amd64 GENERIC
o 11.3-RC2 i386 GENERIC
o 11.3-RC2 powerpc GENERIC
o 11.3-RC2 powerpc64 GENERIC64
o 11.3-RC2 sparc64 GENERIC
o 11.3-RC2 armv6 BANANAPI
o 11.3-RC2 armv6 BEAGLEBONE
o 11.3-RC2 armv6 CUBIEBOARD
o 11.3-RC2 armv6 CUBIEBOARD2
o 11.3-RC2 armv6 CUBOX-HUMMINGBOARD
o 11.3-RC2 armv6 RPI-B
o 11.3-RC2 armv6 RPI2
o 11.3-RC2 armv6 PANDABOARD
o 11.3-RC2 armv6 WANDBOARD
o 11.3-RC2 aarch64 GENERIC

Note regarding arm SD card images: For convenience for those without
console access to the system, a freebsd user with a password of
freebsd is available by default for ssh(1) access.  Additionally,
the root user password is set to root.  It is strongly recommended
to change the password for both users after gaining access to the
system.

Installer images and memory stick images are available here:

    https://download.freebsd.org/ftp/releases/ISO-IMAGES/11.3/

The image checksums follow at the end of this e-mail.

If you notice problems you can report them through the Bugzilla PR
system or on the -stable mailing list.

If you would like to use SVN to do a source based update of an existing
system, use the "releng/11.3" branch.

A summary of changes since 11.3-RC1 includes:

o Updates to the ixl(4) and ixlv(4) drivers.

A list of changes since 11.2-RELEASE is available in the releng/11.3
release notes:

    https://www.freebsd.org/releases/11.3R/relnotes.html

Please note, the release notes page is not yet complete, and will be
updated on an ongoing basis as the 11.3-RELEASE cycle progresses.

=== Virtual Machine Disk Images ===

VM disk images are available for the amd64, i386, and aarch64
architectures.  Disk images may be downloaded from the following URL
(or any of the FreeBSD download mirrors):

    https://download.freebsd.org/ftp/releases/VM-IMAGES/11.3-RC2/

The partition layout is:

    ~ 16 kB - freebsd-boot GPT partition type (bootfs GPT label)
    ~ 1 GB  - freebsd-swap GPT partition type (swapfs GPT label)
    ~ 20 GB - freebsd-ufs GPT partition type (rootfs GPT label)

The disk images are available in QCOW2, VHD, VMDK, and raw disk image
formats.  The image download size is approximately 135 MB and 165 MB
respectively (amd64/i386), decompressing to a 21 GB sparse image.

Note regarding arm64/aarch64 virtual machine images: a modified QEMU EFI
loader file is needed for qemu-system-aarch64 to be able to boot the
virtual machine images.  See this page for more information:

    https://wiki.freebsd.org/arm64/QEMU

To boot the VM image, run:

    % qemu-system-aarch64 -m 4096M -cpu cortex-a57 -M virt  \
	-bios QEMU_EFI.fd -serial telnet::4444,server -nographic \
	-drive if=none,file=VMDISK,id=hd0 \
	-device virtio-blk-device,drive=hd0 \
	-device virtio-net-device,netdev=net0 \
	-netdev user,id=net0

Be sure to replace "VMDISK" with the path to the virtual machine image.

=== Amazon EC2 AMI Images ===

FreeBSD/amd64 EC2 AMIs are available in the following regions:

  eu-north-1 region: ami-091a9d377d956c519
  ap-south-1 region: ami-0fa381eb7dd65b236
  eu-west-3 region: ami-0888c48fcbc7ec3b9
  eu-west-2 region: ami-01d9ee1b7ba0aaf87
  eu-west-1 region: ami-072313e0a896f9fc3
  ap-northeast-2 region: ami-081a9854f2575823e
  ap-northeast-1 region: ami-027ab7629095b2419
  sa-east-1 region: ami-0ed1e9346b072b7fa
  ca-central-1 region: ami-0effcf973bbde0b80
  ap-southeast-1 region: ami-06fc8fd0e39f4a6e8
  ap-southeast-2 region: ami-0e68f9d80df9828aa
  eu-central-1 region: ami-042016143d5bf5261
  us-east-1 region: ami-0ad4a06d874497067
  us-east-2 region: ami-0efb20b4a888c1bd1
  us-west-1 region: ami-0b5b96c925cec68fe
  us-west-2 region: ami-0f672651aa001cc97

=== Vagrant Images ===

FreeBSD/amd64 images are available on the Hashicorp Atlas site, and can
be installed by running:

    % vagrant init freebsd/FreeBSD-11.3-RC2
    % vagrant up

=== Upgrading ===

The freebsd-update(8) utility supports binary upgrades of amd64 and i386
systems running earlier FreeBSD releases.  Systems running earlier
FreeBSD releases can upgrade as follows:

	# freebsd-update upgrade -r 11.3-RC2

During this process, freebsd-update(8) may ask the user to help by
merging some configuration files or by confirming that the automatically
performed merging was done correctly.

	# freebsd-update install

The system must be rebooted with the newly installed kernel before
continuing.

	# shutdown -r now

After rebooting, freebsd-update needs to be run again to install the new
userland components:

	# freebsd-update install

It is recommended to rebuild and install all applications if possible,
especially if upgrading from an earlier FreeBSD release, for example,
FreeBSD 11.x.  Alternatively, the user can install misc/compat11x and
other compatibility libraries, afterwards the system must be rebooted
into the new userland:

	# shutdown -r now

Finally, after rebooting, freebsd-update needs to be run again to remove
stale files:

	# freebsd-update install

Read more

More in Tux Machines

digiKam 7.7.0 is released

After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release. Read more

Dilution and Misuse of the "Linux" Brand

Samsung, Red Hat to Work on Linux Drivers for Future Tech

The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world. Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility. Read more

today's howtos

  • How to install go1.19beta on Ubuntu 22.04 – NextGenTips

    In this tutorial, we are going to explore how to install go on Ubuntu 22.04 Golang is an open-source programming language that is easy to learn and use. It is built-in concurrency and has a robust standard library. It is reliable, builds fast, and efficient software that scales fast. Its concurrency mechanisms make it easy to write programs that get the most out of multicore and networked machines, while its novel-type systems enable flexible and modular program constructions. Go compiles quickly to machine code and has the convenience of garbage collection and the power of run-time reflection. In this guide, we are going to learn how to install golang 1.19beta on Ubuntu 22.04. Go 1.19beta1 is not yet released. There is so much work in progress with all the documentation.

  • molecule test: failed to connect to bus in systemd container - openQA bites

    Ansible Molecule is a project to help you test your ansible roles. I’m using molecule for automatically testing the ansible roles of geekoops.

  • How To Install MongoDB on AlmaLinux 9 - idroot

    In this tutorial, we will show you how to install MongoDB on AlmaLinux 9. For those of you who didn’t know, MongoDB is a high-performance, highly scalable document-oriented NoSQL database. Unlike in SQL databases where data is stored in rows and columns inside tables, in MongoDB, data is structured in JSON-like format inside records which are referred to as documents. The open-source attribute of MongoDB as a database software makes it an ideal candidate for almost any database-related project. This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple and assumes you are running in the root account, if not you may need to add ‘sudo‘ to the commands to get root privileges. I will show you the step-by-step installation of the MongoDB NoSQL database on AlmaLinux 9. You can follow the same instructions for CentOS and Rocky Linux.

  • An introduction (and how-to) to Plugin Loader for the Steam Deck. - Invidious
  • Self-host a Ghost Blog With Traefik

    Ghost is a very popular open-source content management system. Started as an alternative to WordPress and it went on to become an alternative to Substack by focusing on membership and newsletter. The creators of Ghost offer managed Pro hosting but it may not fit everyone's budget. Alternatively, you can self-host it on your own cloud servers. On Linux handbook, we already have a guide on deploying Ghost with Docker in a reverse proxy setup. Instead of Ngnix reverse proxy, you can also use another software called Traefik with Docker. It is a popular open-source cloud-native application proxy, API Gateway, Edge-router, and more. I use Traefik to secure my websites using an SSL certificate obtained from Let's Encrypt. Once deployed, Traefik can automatically manage your certificates and their renewals. In this tutorial, I'll share the necessary steps for deploying a Ghost blog with Docker and Traefik.