Language Selection

English French German Italian Portuguese Spanish

Devices: Mosquitoes, EFCO, Atomic Pi, Android Pie and Bionic Organs

Filed under
Linux
Hardware
  • Olav Vitters: Domotica because mosquitoes

    Price wise, it might be good to buy a device (“hub”) with support for all the Zigbee devices, Z-Wave, Wi-Fi, 433MHz, etc. This as building everything yourself might not even be cheaper if you’re only building it once. This as you might need to buy loads of things: soldering equipment, wire stripper, up to possibly a 3D printer. That would be less fun though!

    That said, it’s a bit unfortunate that to really integrate everything together requires too much knowledge. I’d like a more out-of-the box type of solution. Something I’d be comfortable with giving to family that’s easy to use, works well and is still free software.

  • R-Series based gaming box has triple DP

    EFCO’s Linux-friendly “EGL8350” gaming computer runs on an AMD R-Series SoC with Radeon R5 or R7 GPUs and offers 3x DisplayPorts, 2x GbE, 4x each of USB and serial, 72x JAMMA GPIO, and a SATA-enabled “SmartBay.”

    After announcing an EGL6087 casino gaming logic box with an AMD G-Series GX218 LX earlier this year, EFCO has now launched a system that advances to the more powerful AMD Embedded R-Series SoC. The new EGL8350 follows other R-Series based gaming boxes such as Axiomtek’s GMB135.

  • The Atomic Pi: Is it Worth It?

    Several months ago, a strange Kickstarter project from ‘Team IoT’ appeared that seemed too good to be true. The Atomic Pi was billed as a high-power alternative to the Raspberry Pi, and the specs are amazing. For thirty five American buckaroos, you get a single board computer with an Intel processor. You get 16 Gigs of eMMC Flash, more than enough for a basic Linux system and even a cut-down version of Windows 10. You have WiFi, you have Bluetooth, you have a real time clock, something so many of the other single board computers forget. The best part? It’s only thirty five dollars.

    Naturally, people lost their minds. There are many challengers to the Raspberry Pi, but nothing so far can beat the Pi on both price and performance. Could the Atomic Pi be the single board computer that finally brings the folks from Cambridge to their knees? Is this the computer that will revolutionize STEM education, get on a postage stamp, and sell tens of millions of units?

  • The Pie goes forth - Moto G6 road test

    Overall, not bad. I'm happy that my setup is proving itself under duress in that I have minimal inconveniences while still retaining a quiet and peaceful configuration. Android Pie did misbehave a little on the network side, but the fix for that was a simple reboot. On the other hand, battery management is very good.

    From the usability perspective, things can be better. More streamlined workflow and consistency, like the cyclic paths to settings and the light/dark theme thingie. I also don't see the point in the try-a-feature nudges, because if the system is already using AI to predict things, it should also be able to predict I'm not the target audience for most if not all of the available options and tools. Quite the contrary, the nudges actually only breed further hesitation and resistance. That said, the issues were fairly small, and I was able to use the Moto as needed. Android 9.0 Pie works all right, although in my mind, apart from the battery improvements, it doesn't really bring any cardinal advantages. But then, that's a sign of maturity, and we've seen that with many other operating systems. Well, come the D-Day, my Android experience might be okay. Cautiously optimistic. Until the next time.

  • An open source bionic leg, Python data pipeline, data breach detection, and more news

    A generation of people learned the term bionics from the TV series The Six Million Dollar Man and The Bionic Woman. What was science fiction (although based on fact) is closer to becoming a reality thanks to prosthetic leg designed by the University of Michigan and the Shirley Ryan AbilityLab.

    The leg, which incorporates a simple, low-cost modular design, is "intended to improve the quality of life of patients and accelerate scientific advances by offering a unified platform to fragmented research efforts across the field of bionics." It will, according to lead designer Elliot Rouse, "enable investigators to efficiently solve challenges associated with controlling bionic legs across a range of activities in the lab and out in the community."

    You can learn more about the leg, and download designs, from the Open Source Leg website.

More in Tux Machines

digiKam 7.7.0 is released

After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release. Read more

Dilution and Misuse of the "Linux" Brand

Samsung, Red Hat to Work on Linux Drivers for Future Tech

The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world. Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility. Read more

today's howtos

  • How to install go1.19beta on Ubuntu 22.04 – NextGenTips

    In this tutorial, we are going to explore how to install go on Ubuntu 22.04 Golang is an open-source programming language that is easy to learn and use. It is built-in concurrency and has a robust standard library. It is reliable, builds fast, and efficient software that scales fast. Its concurrency mechanisms make it easy to write programs that get the most out of multicore and networked machines, while its novel-type systems enable flexible and modular program constructions. Go compiles quickly to machine code and has the convenience of garbage collection and the power of run-time reflection. In this guide, we are going to learn how to install golang 1.19beta on Ubuntu 22.04. Go 1.19beta1 is not yet released. There is so much work in progress with all the documentation.

  • molecule test: failed to connect to bus in systemd container - openQA bites

    Ansible Molecule is a project to help you test your ansible roles. I’m using molecule for automatically testing the ansible roles of geekoops.

  • How To Install MongoDB on AlmaLinux 9 - idroot

    In this tutorial, we will show you how to install MongoDB on AlmaLinux 9. For those of you who didn’t know, MongoDB is a high-performance, highly scalable document-oriented NoSQL database. Unlike in SQL databases where data is stored in rows and columns inside tables, in MongoDB, data is structured in JSON-like format inside records which are referred to as documents. The open-source attribute of MongoDB as a database software makes it an ideal candidate for almost any database-related project. This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple and assumes you are running in the root account, if not you may need to add ‘sudo‘ to the commands to get root privileges. I will show you the step-by-step installation of the MongoDB NoSQL database on AlmaLinux 9. You can follow the same instructions for CentOS and Rocky Linux.

  • An introduction (and how-to) to Plugin Loader for the Steam Deck. - Invidious
  • Self-host a Ghost Blog With Traefik

    Ghost is a very popular open-source content management system. Started as an alternative to WordPress and it went on to become an alternative to Substack by focusing on membership and newsletter. The creators of Ghost offer managed Pro hosting but it may not fit everyone's budget. Alternatively, you can self-host it on your own cloud servers. On Linux handbook, we already have a guide on deploying Ghost with Docker in a reverse proxy setup. Instead of Ngnix reverse proxy, you can also use another software called Traefik with Docker. It is a popular open-source cloud-native application proxy, API Gateway, Edge-router, and more. I use Traefik to secure my websites using an SSL certificate obtained from Let's Encrypt. Once deployed, Traefik can automatically manage your certificates and their renewals. In this tutorial, I'll share the necessary steps for deploying a Ghost blog with Docker and Traefik.