Development on Devices: Aaeon, Nageru on GPUs, CircuitPython Hacking by Keith Packard, Coreboot and More

-
Latest UP board combines Whiskey Lake with AI Core X modules
Aaeon has posted specs for a Linux-ready “UP Xtreme” SBC with a 15W, 8th Gen Whiskey Lake-U CPU, up to 16GB DDR4 and 128GB eMMC, 2x GbE, 6x USB, SATA, and optional AI Core X modules via M.2 and mini-PCIe.
Aaeon’s community-backed UP project, which most recently brought us the Intel Apollo Lake based Up Squared and UP Core Plus SBCs, has announced an UP Xtreme hacker board built around Intel’s 8th Gen Whiskey Lake U-series Core processors. This is likely the fastest open-spec, community-backed SBC around, depending on your definition.
-
When your profiler fools you
If you've been following my blog, you'll know about Nageru, my live video mixer, and Futatabi, my instant replay program with slow motion. Nageru and Futatabi both work on the principle that the GPU should be responsible for all the pixel pushing—it's just so much better suited than the CPU—but to do that, the GPU first needs to get at the data.
Thus, in Nageru, pushing the data from the video card to the GPU is one of the main CPU drivers. (The CPU also runs the UI, does audio processing, runs an embedded copy of Chromium if needed—we don't have full GPU acceleration there yet—and not the least encodes the finished video with x264 if you don't want to use Quick Sync for that.) It's a simple task; take two pre-generated OpenGL textures (luma and chroma) with an associated PBO, take the frame that the video capture card has DMAed into system RAM, and copy it while splitting luma from chroma. It goes about as fast as memory bandwidth will allow.
[...]
Seemingly after a little more tuning of freelist sizes and such, it could sustain eight 1080p59.94 MJPEG inputs, or 480 frames per second if you wanted to—at around three cores again. Now the profile was starting to look pretty different, too, so there were more optimization opportunities, resulting in this pull request (helping ~15% of a core). Also, setting up the command buffers for the GPU copy seemingly takes ~10% of a core now, but I couldn't find a good way of improving it. Most of the time now is spent in the original memcpy to NVIDIA buffers, and I don't think I can do much better than that without getting the capture card to peer-to-peer DMA directly into the GPU buffers (which is a premium feature you'll need to buy Quadro cards for, it seems). In any case, my original six-camera case now is a walk in the park (leaving CPU for a high-quality x264 encode), which was the goal of the exercise to begin with.
So, lesson learned: Sometimes, you need to look at the absolutes, because the relative times (which is what you usually want) can fool you.
-
Keith Packard: metro-snek
When I first mentioned Snek a few months ago, Phillip Torrone from Adafruit pointed me at their Metro M0 board, which uses an Arduino-compatible layout but replaces the ATMega 328P with a SAMD21G18A. This chip is an ARM Cortex M0 part with 256kB of flash and 32kB of RAM. Such space!
Even though there is already a usable MicroPython port for this board, called CircuitPython, I figured it would be fun to get Snek running as well. The CircuitPython build nearly fills the chip, so the Circuit Python boards all include an off-chip flash part for storing applications. With Snek, there will be plenty of space inside the chip itself for source code, so one could build a cheaper/smaller version without the extra part.
-
Intel Working On Some Interesting Coreboot Improvements: Multi-CPU Support, SMM
Last week during Facebook's Open Compute Project (OCP) Summit, some interesting details were revealed by Intel and their work on this open-source hardware initialization effort alternative to proprietary BIOS/firmware.
One is that Intel is working on multi-CPU support within Coreboot for multi-socket server platforms. The code for this has yet to be published.
-
gym-gazebo2 toolkit uses ROS 2 and Gazebo for reinforcement learning
The first gym-gazebo was a successful proof of concept, which is being used by multiple research laboratories and many users of the robotics community. Given its positive impact, specially regarding usability, researchers at Acutronic Robotics have now freshly launched gym-gazebo2.
-

- Login or register to post comments
Printer-friendly version- 1690 reads
PDF version
More in Tux Machines
- Highlights
- Front Page
- Latest Headlines
- Archive
- Recent comments
- All-Time Popular Stories
- Hot Topics
- New Members
digiKam 7.7.0 is released
After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release.
|
Dilution and Misuse of the "Linux" Brand
|
Samsung, Red Hat to Work on Linux Drivers for Future Tech
The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world.
Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility.
|
today's howtos
|








.svg_.png)
Content (where original) is available under CC-BY-SA, copyrighted by original author/s.

Recent comments
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago