Language Selection

English French German Italian Portuguese Spanish

Kernel: Outreachy, Collabora, Intel and More

Filed under
Linux
  • More Than 80 Kernel Patches Were Made This Summer By Outreachy Developers

    At this week's Open-Source Summit in Edinburgh there was a kernel internship panel discussion focused on the work done by Outreachy participants, the program paying women and other under-represented groups $5,500 USD for contributing to various open-source projects over a three month period.

    [...]

    Applications for qualified participants for the winter round of Outreachy are currently being accepted through early November.

  • Collabora Continues to Improves Support for Chromebooks in Linux Kernel 4.19

    The Linux kernel 4.19 series is out, so Collabora informs us today through Mark Filion on the contribution they made to this fresh new kernel during its entire development cycle.

    Linux kernel 4.19's development cycle was a long one, with no less than eight RCs (Release Candidates), but it resulted in a more powerful kernel that brings lots of goodies. For Linux kernel 4.19, nine Collabora developers contributed a total of 87 patches, as well as 125 signed-off-by tags, 14 reviewed-by tags, and 8 tested-by tags.

    "As the curtains rose on opening day of Embedded Linux Conference Europe & Open Source Summit Europe in Edinburgh, the latest release of the Linux Kernel, 4.19, was made available by Greg Kroah-Hartman. Collaborans were once again very active, so here's a look at their contributions," writes Helen Koike.

  • Intel 2.5G Ethernet On The Horizon With New "IGC" Driver; WireGuard Not In Net-Next

    Overnight the networking subsystem changes were merged into the mainline kernel for the Linux 4.20~5.0. Sadly not part of this pull request is the much sought after WireGuard secure VPN tunnel but it does bring one of the other features we've been monitoring: the new Intel 2.5G Ethernet driver.

    While WireGuard wasn't part of this net-next pull request, we'll see if it gets into a secondary pull request or is staved off entirely until Linux 4.21~5.1. WireGuard lead developer Jason Donenfeld does believe it's ready for the mainline kernel.

  • PCI Peer-To-Peer Support Merged For Linux 4.20~5.0

    The recently covered PCI peer-to-peer memory support for the Linux kernel has indeed landed for the 4.20~5.0 kernel cycle. This is about PCI Express devices supporting peer-to-peer DMA that can bypass the system memory and processor via a standardized interface.

    The use-case this Linux PCIe P2P memory support was developed for is for copy offloading for NVMe fabrics so data can go directly from an RDMA NIC and copied to the PCIe NVMe SSD storage. There are also implications for multi-GPU systems with this code -- more on the multi-GPU peer-to-peer memory support was discussed in the comments.

  • STACKLEAK Plug-In Being Reattempted For Inclusion In Linux 4.20

    Originally attempted for the Linux 4.19 kernel but not merged that cycle was the STACKLEAK GCC plug-in that was ported for the mainline code-base from the Linux GrSecurity patch-set. That plug-in is now trying to get into the Linux 4.20 (or perhaps relabeled as 5.0) kernel.

    The STACKLEAK GCC plug-in provides efficient stack content poisoning on system call exits. This functionality can fend off possible attacks around uninitialized stack usage and stack content exposure.

  • Hygon Dhyana SoC Supported in Linux Kernel 5.20

    The latest commits to Linux kernel version 5.20 point to out-of-the-box support for the Hygon Dhyana system on a chip (SoC). Hygon is a joint venture between AMD and Chinese company Tianjin Haiguang Advanced Technology Investment Co., Ltd (THATIC), which was formed to create processors for the Chinese server market using AMD IP soon after the U.S. government banned the sale of Intel Xeon processors to China.

  • I/O scheduling for single-queue devices

    Block I/O performance can be one of the determining factors for the performance of a system as a whole, especially on systems with slower drives. The need to optimize I/O patterns has led to the development of a long series of I/O schedulers over the years; one of the most recent of those is BFQ, which was merged during the 4.12 development cycle. BFQ incorporates an impressive set of heuristics designed to improve interactive performance, but it has, thus far, seen relatively little uptake in deployed systems. An attempt to make BFQ the default I/O scheduler for some types of storage devices has raised some interesting questions, though, on how such decisions should be made.

    A bit of review for those who haven't been following the block layer closely may be in order. There are two generations of the internal API used between the block layer and the underlying device drivers, which we can call "legacy" and "multiqueue". Unsurprisingly, the legacy API is older, while the multiqueue API was first merged in 3.13. The conversion of block drivers to the multiqueue API has been ongoing since then, with the SCSI subsystem only switching over, after a false start, in the upcoming 4.19 release. Most of the remaining holdout legacy drivers will be converted to multiqueue in the near future, at which point the legacy API can be expected to go away.

More in Tux Machines

digiKam 7.7.0 is released

After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release. Read more

Dilution and Misuse of the "Linux" Brand

Samsung, Red Hat to Work on Linux Drivers for Future Tech

The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world. Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility. Read more

today's howtos

  • How to install go1.19beta on Ubuntu 22.04 – NextGenTips

    In this tutorial, we are going to explore how to install go on Ubuntu 22.04 Golang is an open-source programming language that is easy to learn and use. It is built-in concurrency and has a robust standard library. It is reliable, builds fast, and efficient software that scales fast. Its concurrency mechanisms make it easy to write programs that get the most out of multicore and networked machines, while its novel-type systems enable flexible and modular program constructions. Go compiles quickly to machine code and has the convenience of garbage collection and the power of run-time reflection. In this guide, we are going to learn how to install golang 1.19beta on Ubuntu 22.04. Go 1.19beta1 is not yet released. There is so much work in progress with all the documentation.

  • molecule test: failed to connect to bus in systemd container - openQA bites

    Ansible Molecule is a project to help you test your ansible roles. I’m using molecule for automatically testing the ansible roles of geekoops.

  • How To Install MongoDB on AlmaLinux 9 - idroot

    In this tutorial, we will show you how to install MongoDB on AlmaLinux 9. For those of you who didn’t know, MongoDB is a high-performance, highly scalable document-oriented NoSQL database. Unlike in SQL databases where data is stored in rows and columns inside tables, in MongoDB, data is structured in JSON-like format inside records which are referred to as documents. The open-source attribute of MongoDB as a database software makes it an ideal candidate for almost any database-related project. This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple and assumes you are running in the root account, if not you may need to add ‘sudo‘ to the commands to get root privileges. I will show you the step-by-step installation of the MongoDB NoSQL database on AlmaLinux 9. You can follow the same instructions for CentOS and Rocky Linux.

  • An introduction (and how-to) to Plugin Loader for the Steam Deck. - Invidious
  • Self-host a Ghost Blog With Traefik

    Ghost is a very popular open-source content management system. Started as an alternative to WordPress and it went on to become an alternative to Substack by focusing on membership and newsletter. The creators of Ghost offer managed Pro hosting but it may not fit everyone's budget. Alternatively, you can self-host it on your own cloud servers. On Linux handbook, we already have a guide on deploying Ghost with Docker in a reverse proxy setup. Instead of Ngnix reverse proxy, you can also use another software called Traefik with Docker. It is a popular open-source cloud-native application proxy, API Gateway, Edge-router, and more. I use Traefik to secure my websites using an SSL certificate obtained from Let's Encrypt. Once deployed, Traefik can automatically manage your certificates and their renewals. In this tutorial, I'll share the necessary steps for deploying a Ghost blog with Docker and Traefik.