Open Hardware/Modding/Hacking



-
Libre Computer's Tritium Is A Line Of Low-Cost Allwinner ARM Boards
In addition to Le Potato and Renegade, another line-up of ARM boards being offered by Libre Computer is Tritium. The Libre Computer Tritium boards are Allwinner-based boards with options from the H2+ for IoT use-cases, the H3 as a mid-range offering, or H5 for a better-performing ARM board that is well supported by the open-source Linux community.
-
See Binary On Your Breadboard
When you’re debugging a board which has an ESP32, Raspberry Pi, or Arduino, it’s easy to slap on a small LCD display or connect via WiFi to see what’s wrong. At least, that’s what the kids are doing. But what if you’re old-school or you don’t have one of those pimped-out, steroid-filled boards? A resistor and an LED will often suffice. Powering the LED means one thing and not powering it means another. And with seven more LEDs you can even display 0-256 in binary.
[Miguel] is clearly in the latter camp. To make debugging-with-LEDs easy, he’s come up with an 8-LED board complete with resistors. He’s even included the Gerber files needed for you to make your own. One row of pins are all connected together and the other row are not. So whether you’re using common cathode or common anode depends on how you orient the LEDs when you solder them in place. You might perhaps have one board of each type at the ready.
-
Ancient Hardware I Have Hacked: Back to Basics!
My return to the IBM mainframe was delayed by my high school's acquisition of a a teletype connected via a 110-baud serial line to a timesharing system featuring the BASIC language. I was quite impressed with this teletype because it could type quite a bit faster than I could. But this is not as good as it might sound, given that I came in dead last in every test of manual dexterity that the school ever ran us through. In fact, on a good day, I might have been able to type 20 words a minute, and it took decades of constant practice to eventually get above 70 words a minute. In contrast, one of the teachers could type 160 words a minute, more than half again faster than the teletype could!
Aside from output speed, I remained unimpressed with computers compared to paper and pencil, let alone compared to my pocket calculator. And given that this was old-school BASIC, there was much to be unimpressed about. You could name your arrays anything you wanted, as long as that name was a single upper-case character. Similarly, you could name your scalar variables anything you wanted, as long as that name was either a single upper-case character or a single upper-case character followed by a single digit. This allowed you to use up to 286 variables, up to 26 of which could be arrays. If you felt that GOTO was harmful, too bad. If you wanted a while loop, you could make one out of IF statements. Not only did IF statements have no else clause, the only thing that could be in the THEN clause was the number of the line to which control would transfer when the IF condition evaluated to true. And each line had to be numbered, and the numbers had to be monotonically increasing, that is, in the absence of control-flow statements, the program would execute the lines of code in numerical order, regardless of the order in which you typed those lines of code. Definitely a step down, even from FORTRAN.
-
Guile-CV version 0.2.0
This is a 'milestone' release, which introduces image texture measures. In addition (a) the default installation locations have changed; (
there is a new configure option; (c) some new interfaces; (d) matrix multiplication performances have been greatly improved; (d) a few interface (name) have changed.For a list of changes since the previous version, visit the NEWS file. For a complete description, consult the git summary and git log
-

- Login or register to post comments
Printer-friendly version- 4296 reads
PDF version
More in Tux Machines
- Highlights
- Front Page
- Latest Headlines
- Archive
- Recent comments
- All-Time Popular Stories
- Hot Topics
- New Members
digiKam 7.7.0 is released
After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release.
|
Dilution and Misuse of the "Linux" Brand
|
Samsung, Red Hat to Work on Linux Drivers for Future Tech
The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world.
Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility.
|
today's howtos
|








.svg_.png)
Content (where original) is available under CC-BY-SA, copyrighted by original author/s.

Recent comments
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago
1 year 11 weeks ago