Language Selection

English French German Italian Portuguese Spanish

Hardware: Raspberry Pi, Arduino, OpenSUSE on HP Pavilion Power 580-146nd, Ancient Hardware I Have Hacked, Backups and Apple Defects

Filed under
Hardware
  • Raspberry Pi Vs. Arduino

    Most people find it difficult to differentiate between a pi and an Arduino. What most people do not understand is that an Arduino is a microcomputer while the Arduino is a micro-controller. This article is about laying out those differences and simplifying each bit by bit. Most probably some of you might have used a Pi and never used an Arduino.

  • Review of the HP Pavilion Power 580-146nd

    The HP Pavilion Power 580-146nd packs a lot of power for a price that is hard to match when building your own PC. However, it might surprise you that I would not recommend this exact machine to others. The reason is that Nvidia cards are still better supported on openSUSE Leap 15. I feel that for most people, the HP Pavilion Power 580-037nd would be the better choice. This machine features an Intel i5-7400 CPU, a Nvidia GeForce GTX 1060 GPU and has 8 GB of RAM. The pricing is very comparable. And the outside of the machine is the same.

    For me personally, this machine was absolutely the right choice. I am very interested in the AMD Ryzen CPU’s. I also like AMD’s strategy to develop an open source driver for its GPU’s (amdgpu) for the Linux kernel. I was looking for an AMD machine and this HP Pavilion Power 580-146nd fits the bill and then some.

  • Ancient Hardware I Have Hacked: My First Computer

    For the first couple of decades of my life, computers as we know them today were exotic beasts that filled rooms, each requiring the care of a cadre of what were then called systems programmers. Therefore, in my single-digit years the closest thing to a computer that I laid my hands on was a typewriter-sized electromechanical calculator that did addition, subtraction, multiplication, and division. I had the privilege of using this captivating device when helping out with accounting at the small firm at which my mother and father worked.

    I was an early fan of hand-held computing devices. In fact, I was in the last math class in my high school that was required to master a slide rule, of which I still have several. I also learned how to use an abacus, including not only addition and subtraction, but multiplication and division as well. Finally, I had the privilege of living through the advent of the electronic pocket calculator. My first pocket calculator was a TI SR-50, which put me firmly on the infix side of the ensuing infix/Polish religious wars.

  • backups⁉️

    A nice long weekend (in the US at least) is a great time to deal with your Backups. You do have backups right? They work right?

    For a number of years now I have been using rdiff-backup for my backups. Unfortunately, a week or so before flock my backups started erroring out and I put off looking into it for various reasons until now.

  • Your iPhone Might Have A Serious Problem: Here’s How To Find Out And Fix It

More in Tux Machines

digiKam 7.7.0 is released

After three months of active maintenance and another bug triage, the digiKam team is proud to present version 7.7.0 of its open source digital photo manager. See below the list of most important features coming with this release. Read more

Dilution and Misuse of the "Linux" Brand

Samsung, Red Hat to Work on Linux Drivers for Future Tech

The metaverse is expected to uproot system design as we know it, and Samsung is one of many hardware vendors re-imagining data center infrastructure in preparation for a parallel 3D world. Samsung is working on new memory technologies that provide faster bandwidth inside hardware for data to travel between CPUs, storage and other computing resources. The company also announced it was partnering with Red Hat to ensure these technologies have Linux compatibility. Read more

today's howtos

  • How to install go1.19beta on Ubuntu 22.04 – NextGenTips

    In this tutorial, we are going to explore how to install go on Ubuntu 22.04 Golang is an open-source programming language that is easy to learn and use. It is built-in concurrency and has a robust standard library. It is reliable, builds fast, and efficient software that scales fast. Its concurrency mechanisms make it easy to write programs that get the most out of multicore and networked machines, while its novel-type systems enable flexible and modular program constructions. Go compiles quickly to machine code and has the convenience of garbage collection and the power of run-time reflection. In this guide, we are going to learn how to install golang 1.19beta on Ubuntu 22.04. Go 1.19beta1 is not yet released. There is so much work in progress with all the documentation.

  • molecule test: failed to connect to bus in systemd container - openQA bites

    Ansible Molecule is a project to help you test your ansible roles. I’m using molecule for automatically testing the ansible roles of geekoops.

  • How To Install MongoDB on AlmaLinux 9 - idroot

    In this tutorial, we will show you how to install MongoDB on AlmaLinux 9. For those of you who didn’t know, MongoDB is a high-performance, highly scalable document-oriented NoSQL database. Unlike in SQL databases where data is stored in rows and columns inside tables, in MongoDB, data is structured in JSON-like format inside records which are referred to as documents. The open-source attribute of MongoDB as a database software makes it an ideal candidate for almost any database-related project. This article assumes you have at least basic knowledge of Linux, know how to use the shell, and most importantly, you host your site on your own VPS. The installation is quite simple and assumes you are running in the root account, if not you may need to add ‘sudo‘ to the commands to get root privileges. I will show you the step-by-step installation of the MongoDB NoSQL database on AlmaLinux 9. You can follow the same instructions for CentOS and Rocky Linux.

  • An introduction (and how-to) to Plugin Loader for the Steam Deck. - Invidious
  • Self-host a Ghost Blog With Traefik

    Ghost is a very popular open-source content management system. Started as an alternative to WordPress and it went on to become an alternative to Substack by focusing on membership and newsletter. The creators of Ghost offer managed Pro hosting but it may not fit everyone's budget. Alternatively, you can self-host it on your own cloud servers. On Linux handbook, we already have a guide on deploying Ghost with Docker in a reverse proxy setup. Instead of Ngnix reverse proxy, you can also use another software called Traefik with Docker. It is a popular open-source cloud-native application proxy, API Gateway, Edge-router, and more. I use Traefik to secure my websites using an SSL certificate obtained from Let's Encrypt. Once deployed, Traefik can automatically manage your certificates and their renewals. In this tutorial, I'll share the necessary steps for deploying a Ghost blog with Docker and Traefik.