news
Open Hardware, Privacy-Focused Linux-Powered Prism "Ambient Computer", and More
-
CNX Software ☛ TOOCAA NOVA Review – 20W laser engraver with Hey Hi (AI) camera, autofocus, and rotary module
TOOCAA NOVA is a desktop laser cutter and engraver that combines creative functions in a compact body. It comes with a translucent orange cover and an A4 work area of 297 × 210 mm, suitable for making signs, decorations, personalized gifts, and DIY projects. The reviewed model uses a 20W diode laser module for cutting and engraving, and supports materials such as wood, paper, leather, and coated aluminum. The machine’s highlight is its 5MP Hey Hi (AI) camera, which displays an image of the material inside the machine in the software, making it easier to align designs with the desired position. It also has an autofocus system that automatically adjusts focus distance and a material card-reading function that helps you select operating settings.
-
CNX Software ☛ Banana Pi BPI-M8 – An Allwinner A733 SBC inspired by the Raspberry Pi 5 with PCIe FFC connector, UFS module socket
Banana Pi BPI-M8 is a credit card-sized SBC powered by an Allwinner A733 octa-core Cortex-A76/A55 SoC that aims to offer an alternative to the Raspberry Pi 5. The BPI-M8 comes with 4GB LPDDR5, HDMI and MIPI DSI display interfaces, two MIPI CSI camera interfaces, Gigabit Ethernet, on-board WiFi 6 and Bluetooth 5.0, four USB ports, a 16-pin FFC PCIe connector, and the usual 40-pin GPIO header. Two variants are offered: the BPI-M8A with 64GB eMMC flash, and the BPI-M8B with 16MB SPI NOR flash.
-
Hackster ☛ Raven Resonance Opens Pre-Orders for the Privacy-Focused Linux-Powered Prism "Ambient Computer"
Raven Resonance has opened pre-orders for the Raven Prism, its first shot at a wearable "ambient computer" built into a pair of glasses — taking a local-first approach in contrast to many of its rivals in the smart glasses sector.
"Since showing Raven Prism publicly at AWE [the Augmented World Expo], it's been exciting to see it resonating so well with technical creatives, developers, and enterprises. People are clearly ready for a radically better relationship with personal computing," claims Raven Resonance cofounder and chief executive officer Thomas Suarez of the company's inaugural product. "For decades, the computer has lived on a desk, in a pocket or in a bag. Raven Prism puts a powerful, open Linux computer directly into your field of view, accessible through your eyes and voice, without demanding your constant attention. Opening pre-orders is an important step toward bringing that capability into people's vision. This is a new kind of personal computer."
-
Tom's Hardware ☛ 16GB Raspberry Pi 5 hiked to $385, more than triple its launch price — makers are already shifting to Pico/ESP32 for small projects, mini PCs for more ambitious tasks
Raspberry Pi boss Eben Upton has officially announced price rises for some 16GB products. Specifically, the price of the 16GB Raspberry Pi 5 is being raised by $80 to $385, and the 16GB Raspberry Pi Compute Module 5 will go up by $40. In a glimmer of better news, the price of the Raspberry Pi 500+ all-in-one desktop, which also features a 16GB model, is being held, but it was already rather pricey.
-
Hackaday ☛ Looking For A Cellular Modem?
You can get these two modems on mPCIe cards, naturally, I’d argue that’s one of the best ways to connect a powerful modem. If you don’t want mPCIe and would rather solder the modem directly onto a board, they’re available in the usual pseudo-QFN packages too – I’ve got an EG25 building block board for you, it’s not battle-tested yet, but it should work well for “copy-paste modem into your circuit and order the board” purposes. Quectel’s documentation is login-gated, but bugmenot solves all.
-
Hackaday ☛ A Hackable Analog Phone System
The Analog Redial is, essentially, a “little phone system you can hack,” according to [Scott]. Plug in a phone or two, and you get the functionality of yesteryear—a dial tone, ringing, and all that. You can make calls between the phones, out via a SIP server, or use the answering machine functionality. You can play around with settings via a web interface, or even set up dial codes so your phone can control your Home Assistant setup.
-
Hackaday ☛ Flying An RC Airplane With Twin Airblower EDFs
Shortly after [RCMakerLab] posted his question on potentially equipping an RC airplane with the electronic ducted fans (EDFs) from those airblower devices – are sold mostly as a replacement for canned air – the comment sections pretty much exploded with comments that he should just have strapped them onto an RC airplane and see for himself. In a new video this is exactly what is done, creating a somewhat A-10 Warthog-esque RC plane with its twin EDF turbines.
-
Didier Stevens ☛ Quickpost: Rad Pro
While researching the inner workings of Geiger-Müller counters, I stumbled upon Rad Pro.
It’s an open-source project developing firmware for cheap GM meters.
-
Bruno Croci ☛ 3D Printing a Shadertoy SDF
The modeling part was done, but what drew my attention instantly was the ability to export triangle mesh. Before I could do any research about exporting SDFs to meshes, this just popped out. So I took some time to understand how it works.
-
Bernardo Kastrup ☛ Kraftwerk's seminal terminal: a photo essay (restoration diary)
This project was about repairing and restoring a Hazeltine 1420 terminal for use alongside my single-board mini-computer, Talos CR™, shown in the video below. Talos is itself intertwined with the story of Euclyd, as it provided the first glimpse of inspiration for the design of a new processor architecture targeting AI workloads. And although, architecture-wise, it has practically nothing in common with what Euclyd does, in a sense it has been the company's first—inspirational—prototype.