Do you waddle the waddle?
The CM0 NANO is based on the Raspberry Pi CM0, which integrates a 1 GHz quad-core 64-bit Arm Cortex-A53 processor. The board includes 512 MB of SDRAM and is offered in configurations with 8 GB or 16 GB of onboard eMMC storage. A CM0 Lite variant without eMMC is also available, allowing the system to boot from a microSD card.
The AI HAT+ 2 is based on the Hailo-10H neural network accelerator, delivering up to 40 TOPS of INT4 inferencing performance. While designed primarily for generative AI workloads, computer vision performance remains comparable to the earlier 26 TOPS AI HAT+, supporting tasks such as object detection, pose estimation, and scene segmentation.
The Watchdog HAT supports a wide range of rechargeable battery chemistries, including Lithium-Ion, Lithium-Polymer, Lithium-Phosphate (Li3PO4), Lithium-Iron-Phosphate (LiFePO4), and Sodium-Ion cells. Charging behavior is software configurable, with selectable end-of-charge voltages ranging from 3.5 V to 4.4 V to match battery manufacturer recommendations.
The ThinkNode M3 is built around the Nordic nRF52840 microcontroller, which handles Bluetooth Low Energy communication and overall system control.
Renesas notes that ForgeFPGA is positioned as an alternative to traditional low-end FPGAs, emphasizing simplified development, low power consumption, and compact packaging.
Collabora has shared a new project demonstrating how the OpenWrt One can be repurposed from a traditional networking appliance into a compact, general-purpose Linux system. The project, called openwrt-one-debian, enables users to install and run a full Debian operating system on the device by booting directly from NVMe storage.
The PRO DP10 A14MG series supports 14th-generation Intel desktop processors, ranging from the Intel Core i7-14700 to Core i5-14400, Core i3-14100, and Pentium Gold G7400 models.
If you turn on this option, your language and formats settings are saved unencrypted on the USB stick to help you type the passphrase of your Persistent Storage more easily.
Quoting: Banana Pi BPI-M4 Super with Rockchip RK3568B2 and Dual Ethernet —
On the software side, Banana Pi indicates support will be provided for Debian 11 (Bullseye) and an Android 9 image tailored for TV box use. Third-party options such as Armbian, Ubuntu (via ubuntu-rockchip), and LEDE are also expected to be supported for server, desktop, and embedded use cases.