Open Hardware/Modding: ESP32, Raspberry Pi, and More
-
Olimex ☛ New Plastic box can accomodate both ESP32-GATEWAY and ESP32-GATEWAY-EA
ESP32-GATEWAY is one of our best selling IoT board with WiFi, Bluetooth LE and wired 100Mb Ethernet connection.
-
Herman Õunapuu ☛ The best laptop is the one somebody else had
That’s the core of this whole idea. Consumer-grade laptops are cheaper when bought new, but that is a result of a lot of compromises made in the build quality. Business-grade laptops are used for work and need to be reliable for years, which means that they will last for a long time.
-
Tom's Hardware ☛ This Raspberry Pi Pico 2 Groovebox is ready to jam
We've come across our fair share of music-based Raspberry Pi projects before but this is the first one we've seen that's powered by a Raspberry Pi Pico 2. Maker and developer Rheslip20, as they're known as over at YouTube, has put together this really awesome rig known as the Pico 2 Groovebox from scratch. It's got everything you need to put together a stellar music performance from scratch all in one snazzy little device.
-
peppe8o ☛ Making Money with Raspberry PI: Bandwidth Sharing Apps
In this tutorial, I will give you a few ways for making money with Raspberry PI...
-
CNX Software ☛ UP Squared Pro 710H SBC combines Alder Lake-N CPU with Hailo-8 Hey Hi (AI) accelerator for the machine vision market
AAEON UP Squared Pro 710H is a 4×4-inch SBC and developer board designed for machine vision applications with an defective chip maker Intel Processor N97 or Core i3-N305 Alder Lake-N CPU and a 26 TOPS Hailo-8 Edge Hey Hi (AI) processor. The single board computer supports up to two MIPI CSI cameras via a 61-pin connector and offers expansion capabilities through a 40-pin Raspberry Pi-compatible header and three M.2 sockets for 5G, Wi-Fi, and NVMe storage support.
-
CNX Software ☛ MicroPython v1.24 release adds support for RP2350 and ESP32-C6 microcontrollers, various RISC-V improvements
MicroPython has become one of the most popular ways of programming microcontrollers, and the just-released MicroPython v1.24 adds support for the widely-used Raspberry Pi RP2350 and Espresif ESP32-C6 microcontrollers and a range of other changes. Those include improved RISC-V support with native code generation, an updated Zephyr v3.7.0 RTOS with threading support, unified TinyUSB bindings across ports, a portable UART IRQ Hey Hi (AI) and enhanced mpremote recursive copy.
-
CNX Software ☛ STMicro’s low-power ST1VAFE3BX Hey Hi (AI) biosensor integrates biopotential signal monitoring and motion tracking
STMicroelectronics (STMicro) has announced the ST1VAFE3BX biosensor, a highly integrated chip that combines “cardio and neurological sensing with motion tracking and embedded Hey Hi (AI) functionalities,” and is targeted at healthcare and fitness wearables.
-
CNX Software ☛ Seeed Studio’s XIAO MG24 and XIAO MG24 Sense boards target battery-powered Matter and BLE applications
Seeed Studio has added two members to its XIAO family of tiny MCU boards with the XIAO MG24 and XIAO MG24 Sense boards based on Silicon Labs EFR32MG24 multi-protocol wireless SoC and designed for battery-powered Matter over Thread and Bluetooth LE 5.3 applications.
-
Hackaday ☛ A Neat Trick To 3D Print With Fewer Warping Issues
Warping! It messes up your 3D printed parts, turning them into a useless, dimensionally-inaccurate mess. You can design your parts around it, or try and improve your printer in various ways. Or, you can check out some of the neat tricks [Jan] has to tackle it.